All Questions
27 questions
1
vote
0
answers
42
views
Corny keg post sizes
My corny keg has two O-rings on each post is this ok?
As my other keg only has one, do I leave both O-rings on or remove one?
- 11
3
votes
2
answers
318
views
Is it necessary to condition if kegging in Cornelius with CO2?
I finished lagering and my recipe/ method says after lagering until desired clarity is reached then bottle and add required amount of sugar and condition at room temperature for at least a week.
I’m ...
- 293
3
votes
1
answer
147
views
Should I lube the gaskets of my kegs?
I am new to kegging my beer. In a video I saw somebody putting Vaseline on all of the gaskets of his corny-kegs. I was wondering if this kills the foam of the beer. Or do I have to lube the gaskets ...
- 628
0
votes
1
answer
316
views
At what pressure reading should I refill my CO2 tank?
It seems like the pressure reading seems to go from ~400 to 0 when I'm not looking, but some of the regulators have a red area, marking when pressure is low. I ask because I had to order a new ...
- 2,178
0
votes
1
answer
156
views
Replace current quick disconnect barb with 5/16" barb
I recently bought a length of hose for connecting my regulator to my quick disconnects. The hose fits snug on the regulator barb but is very loose on the quick disconnect barb.
Here is the hose - 5/...
- 331
0
votes
3
answers
714
views
Co2 shut-off valve
My 5lb co2 tank ran out after 2 uses. The 1/6 keg didn't even get kicked. Do u i need to turn the shut off to off to stop flow of co2 so it doesn't run out? Or do I have a leak?
1
vote
1
answer
232
views
Poppet not sitting correctly in liquid post.
I'm having some real trouble getting the poppet to sit correctly in the liquid post of my keg. Below is an image with the poppet in:
Notice that there is a sizable gap between the poppet o-ring and ...
- 165
1
vote
1
answer
2k
views
Racetrack or standard kegs?
I purchased a pair of ball lock corny kegs at a garage sale recently, and they are in great shape, although they're missing the top cap.
Is there an easy way to tell whether they are standard or ...
- 23
4
votes
2
answers
2k
views
Kegging with no fridge
I just got my first keg and am hoping to get on without forking out for a fridge as well. I probably should've asked this before investing in the keg, but here we are.
Anyway, is it possible to ...
- 141
0
votes
1
answer
638
views
Kegging process and serving PSI
I'm now the proud owner of a corny keg. I just have a couple of questions about carbonating the beer and then what to do during / after serving.
As far as I'm aware, to carbonate the beer I just need ...
- 331
1
vote
1
answer
2k
views
Does anyone make low-profile ball lock disconnects?
Is there such a thing as low-profile gas/liquid disconnects for ball lock corny kegs? I'm curious if there's anything commercially available that is notably shorter in height than the typical black/...
- 153
1
vote
2
answers
287
views
Additional equipment for cornelius kegging
My local supplier is selling refurbished cornelius kegs for a decent price and I would like to pick one up. I don't know the first thing about kegging though, and more importantly what additional ...
- 331
1
vote
1
answer
91
views
kegging and carbonation
I am kegging my first batch ever in the next two weeks. It's a double IPA. My questions are:
What pressure is ideal for serving.
do i need to turn off my tank every night? Will leaving it on cause ...
- 285
3
votes
2
answers
570
views
i want a keg cooler that is cheaper than kegerator
Looking into buying a 5 gal ball lock keg, i have the Co2 tanks, a tap, and gauges/hoses. I want to save by just purchasing something to keep it all cool. Strapped on cash at the moment but want to ...
- 285
4
votes
1
answer
67
views
Leaky soda keg - has beer in it
I have a keg about 1/4 full of Black IPA (delicious) and I have been hooking up co2 when I want a pint of it, to save on co2 because there is a noticeable leak in the lid.
I picked up some keg lube ...
- 171
3
votes
1
answer
4k
views
Corny kegs: Is there a difference between the in coupler and the out coupler?
I have black and grey couplers, one says "in" and the other says "out", but they look exactly the same to me... Does it matter if I use them indiscriminately for gas in/beer out lines?
- 331
3
votes
4
answers
412
views
How to fit kegging into a small house
We have a very tiny house. I brew in the garage and bottle there. I want to keg so bad but I am having trouble finding room for some kegs (in something to keep them cold). Anyone have some genius idea ...
- 178
4
votes
2
answers
877
views
What's the minimum size for a jockey box?
I'm planning on build one cooler based dispensing system for my kegs. My previous experience was with a box with 2 aluminium coils (~15m long) and 2 faucets. It holds a 20 Kg ice pack. And the beer ...
- 1,022
1
vote
1
answer
126
views
What should I expect to pay for pin lock Corny Kegs?
It seems like corny keg prices are all oer the map.
doing a simple search for "used pin lock cornelius keg" I see them from $11.99 on ebay to $38.95 on Cornykeg.com
That's a huge swing.
Relatively ...
- 357
1
vote
1
answer
513
views
Clean kegged, put back together wrong
I recently brewed my second batch of 2x 5 gallon beers. The first time, kegs were recently reconditioned and so I did a quick clean and filled them up. This time, being some time later, I went ahead ...
- 65
2
votes
2
answers
4k
views
How to clean the CO2 line?
I had a tiny bit of backflow when I put the gasline back on the keg after force carbonation. It just flowed a tiny bit into the connector - nothing got inside the line itself.
I read Backflow into ...
- 802
3
votes
2
answers
4k
views
Why did beer get into my gas lines from my corny keg?
I think I know the answer to this, but I'd like to see an answer listing more conclusively the different reasons why this happens. Some causes I've seen listed:
High pressure plus shaking can cause ...
- 1,769
6
votes
4
answers
7k
views
How do I identify the type of poppet I need for a corny keg?
I just got my first kegs - a couple used, reconditioned corny kegs from beveragefactory.com, still smelling like soda (yay). I've been reading up on the process and it seems like it's a best practice ...
- 1,769
9
votes
7
answers
8k
views
What's causing the recent spike in the price of used Corny kegs?
Used corny kegs came from the soda industry, but stocks seem to be drying up pretty quickly. Prices have gone up from $20 per reconditioned keg about 4 years ago to around $50 today (some are asking ...
6
votes
2
answers
9k
views
Backflow into gas line
I just started kegging. I have a beer in a 5 gal ball lock keg. I connected the regulator, set pressure to 15 psi and connected the gas line to the keg.
When I connected the liquid line (standard ...
- 596
7
votes
2
answers
2k
views
Kegging home brew
I have a Cornelius system and I'm wanting to keg my home brew.
I'm curious if you need to prime the beer to help with carbonation or if you just add wort to keg and carbonate from co2?
If you do ...
Russ Wilson
8
votes
3
answers
2k
views
Is there a quicker way to carbonate a corny keg?
Currently, if I want my beer "today" I put the gas into the out tube at the desired target pressure. I then rest the keg on my lap and gently rock it for about 20 mins, until I don't hear any more ...
- 3,799