Questions tagged [kegerator]
For questions relating to the creating or maintaining refrigerators or freezers modified for holding and/or dispensing homebrew (e.g. beer in a Cornelius keg).
48 questions
1
vote
1
answer
151
views
How to remove tubes from co2 regulators
This has been a long pain to remove tubes from CO2 regulators.
To install the Kegerators for event we use C02 cylinder and regulators. After event to dismantle everything we always face issues related ...
- 143
0
votes
1
answer
450
views
How to fix a regulator that doesn't react to pressure changes?
I have a simple (only on gauge, from 0 to 60 psi) regulator that came with my kegerator. It worked fine for 5 years, but recently it's getting stuck.
I have to open the adjustment dial a lot to get ...
- 1,266
1
vote
1
answer
70
views
Cant get rid of condensation inside keezer
I'm running a 5 cubic feet Magic Chef keezer with 2x6s for a collar so I can get an additional keg on the ledge. I cut the corners at 45 degrees and sealed off the collar with caulk, weather stripping,...
- 131
2
votes
3
answers
333
views
How to disassemble a Krome Dispense beer tower?
I have a beer tower whose lines need replacing.
But, I am having great trouble actually pulling the old lines out of the tower. They seem to be attached to some metal disks, which I can neither pull ...
- 143
1
vote
1
answer
49
views
Kegging and dispensing over distance/elevation using keg pressure or something else
A few years ago I set off to turn my kitchen dry bar into a wet bar by routing beer from my kegerator to the taps 10 or so feet above. I was advised against it by some employees at my local home brew ...
- 262
5
votes
1
answer
161
views
How to eliminate stiff foam from kegerator?
I have a kegerator that holds two, five gallon kegs. The kegs are charged at 25 psi CO2 for two weeks at 70°F (21°C). When I place a keg in the kegerator I release the pressure on the keg. Once ...
user10696
2
votes
2
answers
3k
views
Nothing coming out of tap (ball lock corny keg)
I recently got a 5 gallon ball lock corny keg, but am having nothing but trouble with it. I was originally getting nothing but foam coming out of it, so I upgraded the liquid line from 5 feet to 10 ...
- 165
1
vote
1
answer
178
views
Shorter type A German slider coupler
I have a kegerator and have a German beer on draft. There are limited options in volume so it is a tight fit. The type a coupler I purchased is too tall by roughly 1/4". Is there anywhere I can ...
- 11
3
votes
1
answer
1k
views
How to choose a fridge to convert to a kegerator
I'm going to be building a kegerator pretty soon and I'm pretty sure that I am going to buy a new fridge. Now, I have 1 corny keg but in the future, I would like 4 kegs hooked up, my wife also would ...
- 167
1
vote
2
answers
118
views
Partially-covering kegerator
I am new to kegging and I am trying to build a kegerator. I am short on living space so I am considering a particularly low-footprint concept. My question is: what do you guys think about this concept ...
1
vote
1
answer
2k
views
Does anyone make low-profile ball lock disconnects?
Is there such a thing as low-profile gas/liquid disconnects for ball lock corny kegs? I'm curious if there's anything commercially available that is notably shorter in height than the typical black/...
- 153
1
vote
3
answers
3k
views
Foam directly out of my beer line
I hadn't used this kegerator in a couple of years (the fridge has been plugged in, but I've had nothing attached). I bought a brand new 3/16" hose and connected it and now I get about 50% foam coming ...
- 113
2
votes
2
answers
1k
views
Is it safe to drill into the side of a fridge?
I want to transform a compressor wine fridge into a kegerator. I wanted to know where it would be safe to drill holes, either in the side or the top? There is no freezer section, and the back of the ...
- 695
6
votes
1
answer
6k
views
Kegerator taps stick when inactive
So I've noticed with my kegerator, if I don't pour a beer for a few days, the taps can get very sticky. So sticky sometimes that it actually takes a scary amount of force to pull the tap open to ...
- 285
4
votes
2
answers
3k
views
How to make a tap faucet close automatically?
I recently built a kegerator out of a vintage freezer. I've added one tap handle to the door with two more coming soon. The freezer has a latching handle and pretty strong closing action, which pops ...
- 193
3
votes
1
answer
599
views
Troubleshooting wild pours from kegerator
I recently bought an Igloo 6 ft^3 kegerator as my first venture into kegging. It worked very well the first day but has been pouring wildly ever since.
The beer line is 4.5 feet of 3/16" PVC; based ...
- 376
3
votes
4
answers
412
views
How to fit kegging into a small house
We have a very tiny house. I brew in the garage and bottle there. I want to keg so bad but I am having trouble finding room for some kegs (in something to keep them cold). Anyone have some genius idea ...
- 178
2
votes
1
answer
1k
views
Building a kegerator from a wine fridge
I am thinking of making a kegerator for 3 gallon pin lock corny kegs. Is there any issue with using a wine fridge to do this? I thought the size was right, as it can tuck away on my countertop and it ...
- 695
1
vote
1
answer
1k
views
How do I extend my kegerator beer line run properly?
I have a built in kegerator in my kitchen, under the counter style. It is connected to a three tap handle tower and the lines are about 3 feet long. The noise from the compressor/fan is louder than I ...
- 197
4
votes
2
answers
433
views
How can one keg be overcarbonated on a 4-line setup when all the other beers pour just fine?
A while ago I purchased a 4-line kegerator, I have one CO2 tank that carbonates 4 kegs of beer at around 11 psi. When I bring a new uncarbonated keg online, I just add it to an empty gas line and let ...
- 153
1
vote
1
answer
561
views
Can I switch keg from regular pump to kegerator
Would it be possible for me to use a regular store bought pump to tap a keg, then untap it and place it in a kegerator with a co2 pump without the keg going flat? Would I be able to change out the ...
- 11
1
vote
3
answers
5k
views
Keezer ~ Collar vs Faucet top tower
I am just getting ready to setup my keezer. I like the ease of use with a collar, but my little 7 cubic foot freezer is only as tall as my junk. I am concerned that it will be uncomfortable to draw a ...
- 357
3
votes
1
answer
9k
views
Balancing: Correct Serving Pressure Vs Beer Line Length
How long should my beer lines be in my kegerator or keezer for the perfect pint?
1
vote
1
answer
513
views
Clean kegged, put back together wrong
I recently brewed my second batch of 2x 5 gallon beers. The first time, kegs were recently reconditioned and so I did a quick clean and filled them up. This time, being some time later, I went ahead ...
- 65
9
votes
3
answers
18k
views
Why am I getting foam in my keg line when dispensing?
I have a two-tap kegerator which I use to dispense commercial 5-gallon kegs. My lines are about 3 feet long1 and I keep my pressure at 10psi and my temperature relatively cold.
Whenever I draw from ...
- 383
0
votes
2
answers
1k
views
Converting Frigidaire freezer into kegerator
I'm trying to find a good deal in freezers to convert into kegerator, and I found a very good price in this specific model Frigidaire FFC0723DW, but I'm totally noob in cubic feets and all the ...
- 293
4
votes
3
answers
326
views
I have a keg, now what?
A co-worker of mine had a roommate move out and leave his brewing stuff behind, including two 5 gallon kegs (pictured below). Co-worker ended up giving them to me for free.
Obviously you need a CO2 ...
- 155
6
votes
4
answers
652
views
Can forced air be used effectively to cool a second chamber from a keezer?
Would it be possible and effective, without causing undue stress to the keezer, to temperature control a second insulated chamber? I would like to be able to control fermentation temps and/or run ...
- 754
2
votes
5
answers
4k
views
convert pump tap to kegorator tap
I have a "party" pump tap. I want to convert this to use on a DIY kegerator. Can this be done? After taking the tap apart it looks pretty basic: CO2 in one side, beer out the other. I am specifically ...
- 173
3
votes
2
answers
162
views
Are pre-fab kegerators modifiable?
I am considering options for kegerators... on a budget. I have scoped out Craigslist, and I have seen a few pre-fabricated kegerators (not that I'm sold on going that route). Obviously, the one-tap ...
- 675
2
votes
1
answer
401
views
Does kegging require a fridge
I was planning on building myself one of these for the summer: http://www.homebrewtalk.com/f51/portable-igloo-cooler-kegerator-172047-post1990392/
I currently bottle all my beer and don't own any ...
user2637
0
votes
1
answer
970
views
Kegerator Parts for Ball-lock kegs
I know the difference between ball-lock and pin-lock kegs. My question arises in the fact my kegerator is set up for a commercial keg and I need to convert it to fit my ball-lock keg.
This is the ...
- 227
0
votes
3
answers
2k
views
Would it be possible to connect a keg (or series of kegs) to a soda fountain?
Before I go converting my old refrigerator into a kegerator, I was wondering if there was a way to possible connect my keg(s) to a soda fountain? It may grate against the traditionalist tap handles, ...
- 147
5
votes
4
answers
664
views
Fruit flies in kegerator faucets
My kegerator is stored in the garage, and lately fruit flies have been flying into the open ends of the faucet to drink the beer (and subsequently die). Hence, I've been getting a fly with every ...
- 3,266
1
vote
2
answers
440
views
Kegerator CO2 Line
New to the homebrewing boards and I was hoping someone could help me with a quick kegerator question. I picked up a Danby DKC146SLDB from Costco over the weekend and I just got around to setting it ...
3
votes
2
answers
264
views
Got first 2 kegs and need advice
I just bought two 15.5 gallon kegs yesterday from a local brewery that is closing its doors. They asked for $15 each so there was no way I could pass them up. They are in great condition.
I would ...
- 469
2
votes
2
answers
4k
views
Is a dual-body CO2 regulator worth the additional cost?
I have a five cubic foot chest freezer converted into a kegerator. Since I set this up, I've had a standard regulator and one corny or sixth barrel sanke keg in there at a time. I'm planning to slowly ...
- 355
6
votes
1
answer
2k
views
CO2 Bottle inside or outside Keezer?
I'm building a keezer and am not sure what to do with the CO2 bottle. Most folks seem to put it inside the freezer but this troubles my over beer'ed mind. Wouldn't the regulator give a different ...
- 283
3
votes
1
answer
248
views
Can I use a filtering kit with sanke kegs?
I just built a d-coupler kegerator, and picked up a few pony sanke kegs from a friend. I've been looking to start filtering some of my homebrew, but all the kits I see online require soda kegs. Is ...
- 368
3
votes
1
answer
2k
views
Is there a standard size for CO2 tank nozzles?
I'm thinking of buying this kegerator on Amazon, but was wondering if the smaller tank size will make it harder to find a place to fill it. Also, if I'd like a bigger tank at some point will the ...
- 695
2
votes
1
answer
509
views
Glosan and soapy taste
Cleaned lines with Glosan (followed directions and flushed with a keg of purified water) and now there is a soapy taste to the beer. Anybody else have this happen? suggestions for how to avoid this ...
- 2,137
19
votes
4
answers
228k
views
How long do I have to finish a keg once it's been tapped?
I have a kegerator setup with CO2 and a tap. Once a keg has been put into the kegerator, how long will it stay good? What can I do to ensure that I get the longest life possible out of a keg once it'...
- 383
5
votes
1
answer
2k
views
What is the best way to seal a kegerator?
I am trying to prevent condensation in my kegerator, and it seems that sealing it as good as possible is a great idea.
I have a chest freezer with a wooden collar where the faucets are installed and ...
- 1,381
3
votes
1
answer
11k
views
List of current mini fridge makes/models that will fit 5-gallon kegs?
Any fellow homebrewers out there have a suggestion on a current make/model minifridge (not full-sized fridge or chest freezer) that will fit 5-gallon corny kegs? I've seen many suggestions of ...
- 917
4
votes
4
answers
8k
views
How do I prevent condensation in my kegerator?
I have converted a chest freezer into a kegerator by building a wooden collar around the top and re-mounting the freezer lid on that. I installed four faucets in the front and have a hole in the back ...
- 1,381
6
votes
1
answer
545
views
Bottling kegged beer
My dilemma is this. I received a rare beer in a 1/2 barrel keg. I've been nursing on this beer from my kegerator now for 5 weeks (even had a party) and I've still got 5 gallons left. It sits at 9% so ...
- 255
14
votes
4
answers
19k
views
Choosing a good refrigerator/freezer for kegerator conversion
Does anyone have experience and recommendations for a good fridge/freezer for conversion into a kegerator? I'm basically choosing between a full sized fridge, a mini-fridge and a chest freezer. I'll ...
- 1,101
5
votes
3
answers
808
views
Dual Faucet Kegerator and kegs
I am looking for a good dual faucet kegerator for home brewing. I brew in the normal 5.5 gallon batches. I am wanting to move away from bottling and into kegging, and I really want to be able to do ...
- 738