Questions tagged [corny-keg]
abbreviation of cornellius keg. A stainless steel tank, with gas in and liquid out posts that mate with quick disconnects for simple attachment and removal of hoses. 5 gallon capacity is the most common size used by homebrewers. Corny-kegs were most recognized in the soda industry for many years.
75
questions
1
vote
1
answer
77
views
Fermenting in a keg - should I bother transferring after fermentation?
So recently I've been getting into fermenting in kegs and if I'm not going to dry hop (I would want to transfer away from the dry hopped hops to avoid grassy flavours), should I bother transferring ...
- 137
1
vote
2
answers
96
views
Any way to carbonate a keg without opening it and without a regulator?
I have a 19L corny keg full of NEIPA that I wanted to force carb and get drinking quickly. After cooling the keg to 6 degrees I gave it an initial blast of CO2 to 30 psi. As I was shaking the keg, I ...
- 331
1
vote
1
answer
121
views
I'm cold-crashing in a corny keg, in a fridge. I want to take some away in bottles in about 48 hours. Can I carbonate it at the same time?
So, i've done a few brews before (brew in a bag) but this is my first since getting a fridge and a corny keg. My beer has finished fermenting, and I've transferred it (minus the bottom gallon or so ...
- 141
4
votes
1
answer
115
views
Wall sockets for Cornelius kegs line cleaning
I'm looking for a line cleaning socket for a Cornelius keg fitting.
I've worked in the pub trade (UK) for more years than I care to remember so know how bars are set up and I am familiar with line ...
- 165
0
votes
1
answer
40
views
Why are these corny keg relief valves different?
My old valve (on the right) was leaking so ordered a new one from Amazon. It was the only kind I could find so assumed they were all the same. It doesn't seem to fit my keg though. Can someone tell me ...
- 751
1
vote
0
answers
41
views
Corny keg post sizes
My corny keg has two O-rings on each post is this ok?
As my other keg only has one, do I leave both O-rings on or remove one?
- 11
1
vote
2
answers
100
views
Ball Lock Corny Liquid dip tube
Will a liquid dip tube with wings fit any corny keg or are some made to use wingless tubes only?
- 11
1
vote
1
answer
229
views
How long should I wait for priming solution to mix when added to a keg?
Background
After my beer reached FG I transferred it into a corny keg, cold crashed in my keezer at 42°F, and fined with gelatin. 48 hours after adding the gelatin I pulled about a pint of sludge ...
- 113
3
votes
1
answer
182
views
How to fill a corny with shop bought mini-keg beer?
I have not had time to get brew ready for Christmas, so I’m looking to at least fill my Corny kegs with some shop bought beer I.e. 5 litre keg or a box of cider, just so people have the novelty of ...
- 293
3
votes
2
answers
263
views
Is it necessary to condition if kegging in Cornelius with CO2?
I finished lagering and my recipe/ method says after lagering until desired clarity is reached then bottle and add required amount of sugar and condition at room temperature for at least a week.
I’m ...
- 293
3
votes
1
answer
144
views
Should I lube the gaskets of my kegs?
I am new to kegging my beer. In a video I saw somebody putting Vaseline on all of the gaskets of his corny-kegs. I was wondering if this kills the foam of the beer. Or do I have to lube the gaskets ...
- 628
2
votes
1
answer
484
views
How to fill a Corny with Commercial Beer
It may seem odd that a Homebrewer wants to do this, but my last batch didn't go to plan and then my wife decided to invite our friends round for a BBQ this coming Saturday. I'd prefer to have ...
- 293
4
votes
2
answers
175
views
Carbonation Time at Different Keg Volumes
Right now I'm carbonating hard cider in 5 gallon corny kegs at 35psi for about 48 hours.
What I'm wondering is: Will the same pressure/time in larger vessels (say, 1/4 barrel kegs, or 1/2 barrel kegs)...
- 143
1
vote
1
answer
325
views
Exactly how big is a ball lock keg post supposed to be
I recently ordered a pair of used ball lock Cornelius kegs from a website. One of the posts of one of the kegs is slightly bigger than the other. In order to get the beer out line onto the keg in the ...
- 362
0
votes
1
answer
292
views
At what pressure reading should I refill my CO2 tank?
It seems like the pressure reading seems to go from ~400 to 0 when I'm not looking, but some of the regulators have a red area, marking when pressure is low. I ask because I had to order a new ...
- 2,178
0
votes
1
answer
150
views
Replace current quick disconnect barb with 5/16" barb
I recently bought a length of hose for connecting my regulator to my quick disconnects. The hose fits snug on the regulator barb but is very loose on the quick disconnect barb.
Here is the hose - 5/...
- 331
1
vote
1
answer
228
views
How to choose the correct soda keg "type" replacement posts?
New to kegging, got myself a used ball lock Firestone/Pepsi soda keg. But when I've been cleaning and sanitizing the posts when I got it/after use, they seemed SUPER beat up. There is a washer (maybe? ...
- 152
2
votes
1
answer
314
views
Keg corrosion potential of lemon juice adjunct
I have a recipe for a false cider that requires the addition of lemon juice after secondary fermentation prior to bottling/kegging. I've done this before in the bottle with good success but I'm ...
- 267
0
votes
3
answers
656
views
Co2 shut-off valve
My 5lb co2 tank ran out after 2 uses. The 1/6 keg didn't even get kicked. Do u i need to turn the shut off to off to stop flow of co2 so it doesn't run out? Or do I have a leak?
1
vote
1
answer
204
views
Poppet not sitting correctly in liquid post.
I'm having some real trouble getting the poppet to sit correctly in the liquid post of my keg. Below is an image with the poppet in:
Notice that there is a sizable gap between the poppet o-ring and ...
- 165
2
votes
2
answers
3k
views
Nothing coming out of tap (ball lock corny keg)
I recently got a 5 gallon ball lock corny keg, but am having nothing but trouble with it. I was originally getting nothing but foam coming out of it, so I upgraded the liquid line from 5 feet to 10 ...
- 165
2
votes
5
answers
5k
views
Force-carbonated Homebrew Keg Foaming
I see there are other keg-foaming questions on here, but they seem to usually be related to commercial kegs or have answers that I've tried (hastily).
I have a keg of homebrew brown ale and a brand ...
- 203
1
vote
1
answer
1k
views
Will a pure co2 'welding' gas bottle be ok to use for my corny kegs?
I'm finding it hard to find affordable gas bottles in the UK. I've found a supplier that offer as they call it 'beverage' gas which consists of either 30/70 50/50 or 60/40 split of co2 and nitrogen ...
- 167
3
votes
1
answer
1k
views
How to choose a fridge to convert to a kegerator
I'm going to be building a kegerator pretty soon and I'm pretty sure that I am going to buy a new fridge. Now, I have 1 corny keg but in the future, I would like 4 kegs hooked up, my wife also would ...
- 167
1
vote
1
answer
2k
views
Racetrack or standard kegs?
I purchased a pair of ball lock corny kegs at a garage sale recently, and they are in great shape, although they're missing the top cap.
Is there an easy way to tell whether they are standard or ...
- 23
1
vote
3
answers
692
views
Pin lock dip tube requires multiple o-rings?
I use pin lock kegs, and until now all of them have been Firestone/Spartanburg. I recently received a Cornelius brand three-gallon pin lock keg. The post threads on this keg are different from all the ...
- 1,432
4
votes
2
answers
2k
views
Kegging with no fridge
I just got my first keg and am hoping to get on without forking out for a fridge as well. I probably should've asked this before investing in the keg, but here we are.
Anyway, is it possible to ...
- 141
0
votes
1
answer
625
views
Kegging process and serving PSI
I'm now the proud owner of a corny keg. I just have a couple of questions about carbonating the beer and then what to do during / after serving.
As far as I'm aware, to carbonate the beer I just need ...
- 331
1
vote
1
answer
2k
views
Does anyone make low-profile ball lock disconnects?
Is there such a thing as low-profile gas/liquid disconnects for ball lock corny kegs? I'm curious if there's anything commercially available that is notably shorter in height than the typical black/...
- 153
1
vote
2
answers
286
views
Additional equipment for cornelius kegging
My local supplier is selling refurbished cornelius kegs for a decent price and I would like to pick one up. I don't know the first thing about kegging though, and more importantly what additional ...
- 331
1
vote
1
answer
91
views
kegging and carbonation
I am kegging my first batch ever in the next two weeks. It's a double IPA. My questions are:
What pressure is ideal for serving.
do i need to turn off my tank every night? Will leaving it on cause ...
- 285
3
votes
2
answers
567
views
i want a keg cooler that is cheaper than kegerator
Looking into buying a 5 gal ball lock keg, i have the Co2 tanks, a tap, and gauges/hoses. I want to save by just purchasing something to keep it all cool. Strapped on cash at the moment but want to ...
- 285
4
votes
1
answer
63
views
Leaky soda keg - has beer in it
I have a keg about 1/4 full of Black IPA (delicious) and I have been hooking up co2 when I want a pint of it, to save on co2 because there is a noticeable leak in the lid.
I picked up some keg lube ...
- 171
1
vote
3
answers
1k
views
How to remove/service static relief valve on a pin lock keg?
i have a pin lock keg with a leaking static relief valve. The lid looks like this:
I can't figure out how to remove the innards of the relief valve to fix it. Any ideas?
- 11
3
votes
1
answer
123
views
Adding boiling wort on previous batches yeast sediments
I've been using kegs as fermentors and 'no chill' vessels.
With pressurized fermentation I'm getting so much less sediment and krausen, and actually I purge the yeast before and after transfer, so ...
- 1,012
0
votes
1
answer
1k
views
What's under the keg rubber handles?
One of my kegs have a very brittle rubber handle. Them I realized that I don't know if it is just a rubber piece glued to the keg body or if there is any sort of metal underneath.
If there is just a ...
- 1,012
3
votes
2
answers
437
views
Spunding CO2 from 3 keg fermentors
I'm starting to ferment in kegs, and want to naturally carbonate my beers by using a spunding valve. My batches yield 3 kegs, and I'm already using a 4º keg to aerate them after no chill and after the ...
- 1,012
1
vote
2
answers
540
views
Aerating no chill corny keg fermentors that don't seal
I'm very interested in ferment in corny-kegs after reading some questions about that here on this stackexchange. I will try it next batch, but there is a question about aeration/no chilling method:
...
- 1,012
3
votes
1
answer
4k
views
Corny kegs: Is there a difference between the in coupler and the out coupler?
I have black and grey couplers, one says "in" and the other says "out", but they look exactly the same to me... Does it matter if I use them indiscriminately for gas in/beer out lines?
- 331
2
votes
2
answers
350
views
Half-size keg force carbonation
Today I have 1 half sized corny keg (11,4L - ~3gal) and want to force carbonate it.
Normally when force carbonating normal sized cornys of 5 gal (19L) I use ~30 psi for about 10 minutes.
Don't know ...
- 1,012
3
votes
4
answers
394
views
How to fit kegging into a small house
We have a very tiny house. I brew in the garage and bottle there. I want to keg so bad but I am having trouble finding room for some kegs (in something to keep them cold). Anyone have some genius idea ...
- 178
4
votes
2
answers
851
views
What's the minimum size for a jockey box?
I'm planning on build one cooler based dispensing system for my kegs. My previous experience was with a box with 2 aluminium coils (~15m long) and 2 faucets. It holds a 20 Kg ice pack. And the beer ...
- 1,012
1
vote
3
answers
1k
views
Can I use my CO2 regulator as a inside keg pressure checker?
If I force carbonate my keg, and after that I close my CO2 cilinder valve and plug my gas line into my gas in quick disconnect. Would this make my CO2 regulator to work as a spunding valve and let me ...
- 1,012
3
votes
2
answers
2k
views
Is this pressure release valve missing a pull ring?
This photo shows the lid off a keg I purchased. I think it's a manual release valve, but all the manual one I've seen online have pull rings. As requested, here is a photo of the back.
Will this work ...
- 494
1
vote
1
answer
2k
views
Gas In dip tube is missing in my corny-keg
I bought two used cornies. They're pin locks, and neither of them came with Gas tubes. Will everything still work? Or do I need to buy replacements?
- 494
1
vote
2
answers
1k
views
What is the overall volume of a Corny keg?
Cornelius kegs come in various sizes, but many home brewers use the "five gallon" (nominal) size.
Including the headspace, how much volume is available inside of the standard five gallon Cornelius ...
- 3,375
2
votes
3
answers
647
views
'Auto-transfer' to secondary corny keg fermentors?
I've been reading some topics about corny-keg fermentors and became interested in that. So I was wondering:
If I ferment in a sealed keg with the liquid side plugged into another keg, by its liquid ...
- 1,012
1
vote
2
answers
185
views
Can I run a corny keg without liquid post?
So I was starting to setup a jockey box and cornelius pin-lock kegs to enjoy my last batch, when I noticed that I was without my pin lock liquid quick disconnect. Well, a friend brought one, and then ...
- 1,012
4
votes
2
answers
428
views
How can one keg be overcarbonated on a 4-line setup when all the other beers pour just fine?
A while ago I purchased a 4-line kegerator, I have one CO2 tank that carbonates 4 kegs of beer at around 11 psi. When I bring a new uncarbonated keg online, I just add it to an empty gas line and let ...
- 153
4
votes
2
answers
1k
views
Do pin lock static relief valves need to be replaced after activation?
If the static relief valve on a pin lock keg has vented pressure (i.e at 130 psi) does the valve cease to work? Does it need to be replaced with a new static relief valve?
Background:
I was watching ...
- 678