if you brewed from extract, then it probably is mostly cold break possibly hop material. Even if you chilled in the kettle, it takes time to settle and so it would have been racked along with the wort. If you choose to do so you can keep it out of the fermentor by whirlpooling the wort in the kettle and leaving it for 15-30 mins until you can see the trub on the bottom of the kettle. Transfer from the kettle leaving the trub behind.

The biggest problem with so much trub is that it throws off your volume. You think you've got 5.5 gallons in the fermentor, but later find that a fairly large chunk of that is trub - invisible until it settles out, leaving you with maybe only 5 gallons. With just 5 gallons in the primary, you'll probably only get 4.5-4.75 packaged. Not a problem when bottling, but a bit of a waste of capacity when kegging. Keeping the trub out of the fermentor is a big step to getting accurate volume in the fermentor and hitting your intended batch size.