Questions tagged [priming-sugar]
sugar (usually corn sugar, table sugar or malt extract) that is added to the beer at bottling time to carbonate the beer.
55
questions
1
vote
1answer
37 views
Re-Carbonating bottles in case bottles loose CO2
A friend of mine used plastic bottles with plastic caps (like coke bottles) for bottling. He used sugar (Granulated Sugar of Sugar Beet) for priming.
It turned out those plastic bottles have ...
2
votes
1answer
48 views
1
vote
3answers
121 views
Is it wise to dissolve priming sugar or gelatin in water the day before adding it to the beer?
One of the biggest time consumers I have on bottling day is cooling down the sugar to room temperature. So I have been thinking about sanitizing a small container the day before bottling, dissolve the ...
1
vote
2answers
115 views
Priming kit beer without bottling bucket
After experiencing midnight explosion in 5L keg few year ago, i researched for safer ways to prime. Ever since i was measuring dextrose and adding in each bottle per its volume (and desired CO2) and ...
5
votes
4answers
1k views
Is there anything as too much priming sugar?
I know there are priming sugar calculators out there to help decide how much sugar one should add but is there any thing as too much priming sugar and if yes what would be the side effect to expect?
...
1
vote
1answer
94 views
Best Carbonation amount of sugar
I am korean homebrewer. I brewed Citra Pale Ale, but I am not quite satisfied. After fermentation, I added 3g or 6g of priming sugar in 500ml bottles. The 3g of sugar bottles had good flavor but less ...
1
vote
3answers
56 views
closed keg fermentation - is it taking place?
long story short - primed the keg with sugar, let it raise up to temperature, can't hear any gargling. IS my sugar carbonation taking place or all the old yeasts have died ?
1
vote
2answers
73 views
Urgent help for a new beginner
I'm about to brew a 5lb batch, I don't really know exactly the step when should we add corn sugar though. Also, I'm wondering that once I'm done boiling and adding DME, yeast, hop, etc.. then shall I ...
2
votes
2answers
82 views
How to over carbonate?
Why would I want to over carbonate? Simple I’m trying to debug my under carbonated batches. So far I’ve had 4 batches all primed with coopers carbonation tabs and while they have all had some bubbles ...
3
votes
3answers
5k views
Effect of priming with honey
How prominent might I expect the flavors of honey to be, if used as a priming element for beer?
I am thinking about it in terms of an all-grain pale ale variation, perhaps with honey or biscuit malt ...
3
votes
3answers
140 views
Adding priming sugar to lagering secondary
A few weeks ago, I brewed a Belgian double, its done fermenting and ready for the next step. I've noticed that the beer is still very cloudy so I prefer a cold-crash/lagering period before bottling ...
7
votes
3answers
7k views
What causes “rush” carbonation when adding sugar?
I've just been playing with some treatments for an undercarbonated batch in bottles. The beer is slightly carbonated, it bubbles up a little when poured, just builds no head & dissipates ...
1
vote
1answer
96 views
Same priming sugar when using larger bottles?
Been brewing & bottling for almost 5 years and never stumbled upon this. This year's Christmas beer is going in 22 oz bottles. Do I use the same amount of priming sugar for the batch?
2
votes
2answers
756 views
Is it possible to successfully bottle a beer that's already been primed in a barrel?
I'd like to know what the effect of trying to bottle 35 pints of a light ale that's already been primed in a barel would be? Presumably there is still yeast floating about that would be able to ...
4
votes
2answers
5k views
What is the ideal temperature during carbonation with priming for an ale?
During sugar priming, how does the temperature influence?
In my understanding, higher the temperature, faster the carbonation process. But can this somehow produce some off-flavors on the beer?
Too ...
12
votes
7answers
9k views
Alternatives for priming sugar
If you happen to be out of priming sugar, but really want to bottle your beer, what are the alternatives? Let's assume a 5 gallon batch that's fully fermented - call it 1.010-1.014.
4
votes
2answers
2k views
How does corn sugar affect the beer vs cane sugar?
Brand new to home-brewing. Currently making 1 gal small batches. I see a lot of recipes that call for either corn sugar or cane sugar, with honey as another alternative. How does corn sugar affect the ...
5
votes
3answers
2k views
DME for priming
I fully acknowledge that the internet is a place of truly limitless (and often incorrect/misinformed) information, yet here I am asking this question on an internet forum.
I'm planning on bottling ...
5
votes
3answers
12k views
Over carbonated what went wrong? Detailed
I realize this question has been asked a few times, however, I'm curious as to where I specifically went wrong with my batch. I can't seem to pin point it.
I brewed a batch of IPA that tasted amazing ...
0
votes
3answers
909 views
How to calculate and add the required amount of inverted sugar (liquid) during the bottleling phase?
How should I calculate te correct amount of priming sugar (inverted sugar) in liquid form, pretty much like a syrup for bottleling ?
I was thinking in using a cooking syringe to add it to each bottle,...
2
votes
2answers
94 views
Why do we boil sugar before priming
I read that when priming you need to boil sugar in water. I don't see the point since sugar is considered an anti septic.
What is the purpose of boiling?
Would it be because we need desolved sugar ...
3
votes
2answers
2k views
What is the right amount of priming sugar for a bottle with expandable head space?
When bottling in plastic (PET) bottles, it is possible to eliminate oxygen from the bottle by squeezing the bottle. Below is a 3 liter bottle with only one liter of beer in it:
I have done this ...
3
votes
3answers
407 views
How to use priming sugar
I am about to bottle my first cider, and i have a 500g bag of priming sugar, from what i have read, i can either prime each bottle, or i can pour the sugar into the brewing vessel and stir it in if i ...
1
vote
1answer
3k views
I am brewing alcoholic ginger beer. How much sugar to prime it?
I am looking for this ginger beer to be sweet, spicy and very fizzy. Something which should violate your tongue's human rights.
I have never produced a fizzy brew before so know nothing about ...
1
vote
3answers
229 views
Beer bottling procedures (first timer)
I'll be bottling my first batch of beer next week. I'm curious about the logistics of this given the equipment I have. The 5 g batch is currently in the primary fermentation bucket. I planned to skip ...
1
vote
3answers
682 views
Using caster sugar as a barrel primer. Bad idea?
My first best of home brew fermented for 6 days, then transferred to barrel for the net 3 weeks - i used woodforde's real ale mix.
BUT at the last seconds i forgot primer so i improvised wit 80g of ...
1
vote
2answers
10k views
Priming sugar in kegs [duplicate]
Do you need to add priming sugar when moving beer to a keg? Will the CO2 from the system be enough to carbonate it?
5
votes
1answer
772 views
Stupidly added priming sugar in initial fermentation step
I started my first brew this weekend with a kit,
Stupidly, I misread the instructions and added the bag of priming sugar (which was supposed to be added immediately prior to barrelling) at the start ...
6
votes
3answers
6k views
Confectioners sugar for priming?
I have a batch of wheat beer on the go at the moment and I'm wondering which sugar to use as priming sugar? In my local shop the priming sugar they sell looks just like confectioners/powdered/icing ...
8
votes
1answer
2k views
Why is less bottling sugar required when naturally carbonating in a keg versus bottles?
When I look at various carbonation tools, I noticed that the amount of bottling sugar was MUCH reduced when naturally carbonating in a keg:
It would seem to me that a certain amount of sugar would ...
0
votes
1answer
122 views
Too little sugar?
It's my first time making cider and I believe I didn't put enough sugar in it. I put 1 1/2 brown sugar (Even though some fell off to the side cause I didn't dissolve it, like the twit I am). I would ...
0
votes
2answers
2k views
Underprimed Pressure Barrel (Didn't add enough sugar at start of secondary fermentation)
Whilst following my first batch of home brew instructions, rather than using a Priming Calculator we added the amount recommended for bottling (1/2 teaspoon per pint). It's been in the pressure barrel ...
3
votes
3answers
10k views
Flat beer after priming in a pressure barrel
Completed my first fermentation of home-brew bitter which finished at 2.5% alcohol after 2 weeks. Transferred the beer to a pressure barrel and added a level teaspoon of sugar per pint to start ...
3
votes
4answers
8k views
Do I Always need to add Sugar when bottling?
I'm doing my second brew after great success with the well documented Brooklyn Brewshop Everyday IPA.
This time is the exact opposite, random recipe and random grains. I went to a brew shop and had ...
5
votes
1answer
391 views
How can I prime by taking the gravity of the priming fluid?
I have this great mulberry syrup I found. I want to prime with it, and I forget how to figure this out with an unknown sugar source. I see that John Palmer's "How to Brew" references measuring the ...
1
vote
1answer
642 views
Using juice as bottling sugar
So, I have brewed a big batch of kombucha. Normally, the original gravity is 1.020. But this time, I created a 1.016 batch. After nine days, the gravity went to 1.014 and the pH to 3.4. The ...
0
votes
1answer
345 views
Priming Sugar Amounts
I've always primed my beer at the same rate (5g corn sugar/L) but a recent spate of gushers has made me think that perhaps this is too much - is 4g/L more sensible? or even 3g?
1
vote
1answer
4k views
Flat beer. Not enough priming sugar?
I'm new to this blog and brewing. Recently i put down my first Coopers Real Ale. All went well, great flavor but flat to very slight carbonation in bottles.
1.5 tsp in 1250ml and .5 tsp in 750ml ...
7
votes
2answers
2k views
Can I use fructose as a priming sugar and how much should I use?
OK, so I was in the health food shop (again) and couldn't find any corn sugar. However, on a whim I bought some fructose. I am thinking of using it for priming the English ale I have pencilled in to ...
1
vote
1answer
10k views
How long does bottle priming take? (Ginger Beer)
I've test bottled one 500ml bottle of Ginger Beer with one Coopers priming drop. How long does priming take? If I opened it in a day would it have some pressure/fizz/gas or does it need a week or so? ...
1
vote
2answers
260 views
Priming sugar/drop mixing worry, in a test bottling
I'm preparing to bottle a 30 pint batch of Ginger Beer. It started at 1.041 and has finished at a steady 1.008 after 2 weeks or so.
I siphoned one bottle's worth earlier into a 500ml flip-top, and ...
2
votes
2answers
3k views
How important is the 'Best Before' date on Brewing Sugar?
I have a 1kg bag of Youngs Brewing and Winemaking Sugar. It was bought early last year, and the pack has a Best Before date of 08/08/12.
I was hoping to use it for bottle priming next week. Does ...
1
vote
3answers
1k views
Recipe says don't add priming sugar, will it lead to flat beer?
I am total novice so please excuse me for possibly stupid question. I bought a "beer kit" (malt + hop) that had recipes for 20 and 12 liters. I decided to go for 12 liters, because I don't have a lot ...
8
votes
2answers
340 views
Experimenting, Priming Sugars
I've got a 3 gallon batch of bourbon dubbel fermenting, recipe calls for priming with maple syrup, I'm thinking of siphoning off .5 gal to prime with honey and .5 gal to prime with black treacle.
...
3
votes
3answers
2k views
Priming a Tap-A-Draft system
I just got a Tap-A-Draft system (http://www.northernbrewer.com/shop/tap-a-draft-system.html) because I do not have the room for a full kegging system.
The TAD came with 3 6L PET bottles. I have 2 5 ...
2
votes
1answer
1k views
Corn Sugar Off Flavors [closed]
I know there is a substantial amount of debate regarding whether to use DME or corn sugar or table sugar to bottle prime, but I wanted to ask the question if priming with simple glucose, can ...
0
votes
1answer
997 views
Bottle carbonation - too much priming sugar?
I posted a question here before about what I decided was an 'extract twang' flavor. I tried a bottle from batch #2 yesterday, and I noticed the same thing. Here's where it gets interesting.
My brew ...
1
vote
1answer
846 views
May be too much carbonation on the way
Bottled up a fig-gose a week ago, and figured I would try one last night just for kicks. Big hiss and and about a 1 inch head. Plenty of carbonation now, but it is still 'young' carbonation (big, ...
6
votes
2answers
4k views
How precise must the measure of priming sugar be?
I usually bottle home brew into 750ml bottles, and less commonly into 375ml bottles. I have a two-ended sugar spoon which is for priming these, and it's obvious which spoon head goes with which bottle ...
12
votes
2answers
7k views
Using a keg for secondary fermentation and natural carbonation?
I would like to transfer a beer that has been fermenting for about 3 weeks directly into a Cornelius keg for secondary fermentation AND carbonation.
I would like to add priming sugar and naturally ...
