Questions tagged [cleaning]

The removal of soils from the surface of equipment left behind by the brewing/fermentation process. A vital prerequisite for good sanitation.

Filter by
Sorted by
Tagged with
3
votes
1answer
2k views

Beer stone: what works?

After some investigating, I've discovered that beer stone (calcium oxalate, mostly) doesn't just taste vile, it's highly toxic. Plus it's ugly. As if that wasn't bad enough, it's also incredibly ...
0
votes
2answers
333 views

Critique my Cleaning Regime

I have one batch of home brew under my belt, and I am preparing for my 2nd and 3rd batches (going to get a second primary fermenter so I can have two batches going at once) so I have spent a few hours ...
3
votes
2answers
8k views

How to clean an old oak barrel

I have a very old oak barrel that was given to me that used to have rum in it. It has been empty for about 10 years but I would like to clean it to store cider. What is the best way to clean it so ...
7
votes
8answers
6k views

Cleaning bottles - What's a good cleaning agent?

At this point I am using regular dishwashing liquid for cleaning my bottles. This is not perfect, I know and I think, I am seeing a detrimental effect on the foam, but I do not know a good alternative....
0
votes
2answers
1k views

Cleaning Inside of Racking Cane

I've noticed a little build up of gunk (for lack of a better term) in the curve of my racking cane. I can use a cleaning brush to get most of the cane but I don't have anything on hand to get into the ...
1
vote
4answers
310 views

Homebrewing and Cats

I am somewhat interested in obtaining 2 kittens. My 1 bedroom apartment already isn't the cleanest. I spray 409 and Windex on all my surfaces before I brew or bottle and call it clean. I'm not going ...
1
vote
3answers
108 views

Cleaning, sanitizing

I have been cleaning all of my equipment with vinegar and this has always worked well. However recently i have had several brews that have been flat after the relevant brewing period and I have ...
8
votes
5answers
2k views

Would placing the fermenter tank in a tub of water be a good way to handle hot environments?

Summers where I live typically have 80F nights and it can easily pick up to 95 degrees during the day. I have a plastic trash can (which I bought for this purpose) that I have filled up with water. ...
0
votes
4answers
400 views

Stirring Spoon Hop Stained

So... I will just start with sharing that "Hop Stained" has a nice ring to it for an IPA name, but I digress to my question. During my first batch, I am becoming paranoid I did not pay enough ...
1
vote
3answers
1k views

Cleaning the fermenter spigot before bottling

I have a cider in the fermenter that has been there for almost two months. I am ready to bottle it now but during the half way point I took a sample out of the spigot to check the FG reading. My ...
1
vote
1answer
156 views

Can you use sodium metabisulphite that is hard

I have a container of sodium metabisulphite for sterilizing my fermenter and bottles that has gone hard. It is about 1 year old. Can I still use this effectively or should I use another container ...
0
votes
2answers
91 views

Trying a gluten free kit; must I buy new equipment to be safe?

I just ordered a gluten free kit to brew for a friend of mine who has celiac disease. I have a glass carboy, but another home brewer recommended I start with completely new equipment. Is that ...
5
votes
10answers
2k views

What are some effective, cheap, easy ways to clean and re-use bottles?

After a couple year hiatus from home brewing, I'm ready to get back into it and I have been diligently consuming some local microbrews and saving the bottles in preparation. When I brewed before, for ...
7
votes
2answers
5k views

How often should a keg be disassembled and cleaned?

Right now I give my corny kegs and beer lines a hot rinse, PBW soak, rinse and Starsan in-between batches. I inspect for gunk but don't fully disassemble (posts, etc.) unless there's something ...
7
votes
1answer
2k views

Prevent haze on the inside of vinyl tubing when cleaning

I've been cleaning my carboys with oxy-clean and it works wonders... no need to even brush (which is important if you're using the plastic 'Better Bottles'). So I decided to throw all my vinyl tubes ...
3
votes
1answer
1k views

After cleaning a bottle, what's an acceptable amount of leftover StarSan bubbles?

I've been slowly improving my bottling, thank goodness. I make a pot of warm / hot StarSan, and fill each bottle with the mixture, then after a while, turn each bottle upside down in the StarSan pot. ...
8
votes
3answers
2k views

Is There A Way To Get Root Beer Taste/Smell Out Of Kegging Equipment?

I've since learned better, but when I first got my kegging setup, I put root beer on one of the lines. After that keg was empty, I decided to put soda water in instead. Unfortunately, the root beer ...
6
votes
2answers
1k views

Necessary to clean bottle tree?

So I recently purchased a bottle tree (not sure how I went so long without one) for drying/storing my sanitized bottles. Is it is overkill to sanitize the bottle tree in sanitizing solution as well? ...
4
votes
3answers
597 views

How to clean my my stove top?

Just finished cooking up my first batch of home brew, and during the boil I boiled over just a little bit. Now there's this dark black burned stuff all over my stove that does not want to come off. ...
2
votes
1answer
1k views

Is Oxiclean Free OK to use on a metal brewpot

Is it safe to use Oxiclean Free on a metal brew pot? I know that rinsing thoroughly is required after using Oxiclean Free. Is it safe to let the brew pot sit in an Oxiclean Free solution overnight?
6
votes
1answer
1k views

Are One-Step and OxyClean the same thing?

They're both perchlorate-based cleaners. I was thinking of buying some OxyClean when I ran out of One-Step and my LHBS only carried PBW and StarSan, but One-Step has worked so well for me that I don'...
8
votes
4answers
2k views

How to clean the inside of a blowoff hose

I soaked my blowoff hose in PBW for an hour or so, then rinsed and let dry. There is still light amounts of residue visible. The only brush I own is a carboy brush which I don't think will fit through,...
0
votes
4answers
341 views

Cleaning Fermenter [duplicate]

Possible Duplicate: Cleaning difficult krausen ring off Better Bottle I just finished my first batch of beer from a Brooklyn Brew Kit, and noticed a film in my fermenter. This film is right ...
2
votes
2answers
3k views

How to clean the CO2 line?

I had a tiny bit of backflow when I put the gasline back on the keg after force carbonation. It just flowed a tiny bit into the connector - nothing got inside the line itself. I read Backflow into ...
2
votes
3answers
1k views

How can I tell there is mold in my bottles?

I just got my kit and am about to brew for the first time. I was warned to not use bottles that have sat out uncleaned because there can be mold in them. How can I tell if there is mold in my ...
2
votes
3answers
5k views

Deep cleaning equipment after “brett” contamination

A Few Contaminated Batches Although most of my beers have been coming out 'clean', I've had a couple of my beers show up with what I think might be bretanomyaces or some other 'bug'. The ...
0
votes
1answer
943 views

Can't get my glass carboys completely clean

I've been relatively active on homebrewtalk.com, have read the cleaning chapter of How to Brew half a dozen times, and watched the instructional video that came with my kit on how to clean carboys. I ...
2
votes
3answers
1k views

Cleaning & sanitizing NPT and weldless fittings

I just got a new boil kettle with a stainless ball valve attached with a weldless bulkhead fitting, and a stainless barb connected to the NPT outlet of the ball valve. What's the cleaning procedure ...
4
votes
3answers
3k views

What amounts and times should I use to clean/sterilize my brewing equipment?

There are actually 2 questions here. The first one is more of an opinion (although I would like to know), but the correct answer will only be awarded for the second question. I have been researching ...
1
vote
1answer
1k views

Is iodophor ideal for rinse-less sanitization before bottling?

I was talking to a friend today and complainIng about the clean/bleach/sanitize/rinse process I undergo when bottling. He dug a bottle of iodophor out of a back shelf and asked me to try it out. He ...
7
votes
1answer
1k views

What cleaners can I use for Kegs?

I'm new to kegging, but I was made aware that I shouldn't use sodium metabisulfite when cleaning a keg. So what cleaners can I use? More specifically, can I use OxyClean or Diversol?
14
votes
3answers
2k views

My keg is empty. Now what?

So I kicked my first Corny keg and need to get the keg and the system cleaned and ready for another batch, which might not be ready for some time. What's my process here?
10
votes
7answers
2k views

Are bottle brushes necessary?

I've always bottled my beers (haven't invested in a kegging setup yet), and I've never once used a bottle brush. I simply soak my bottles in OxyClean to clean them, give them a shake, then rinse, ...
6
votes
1answer
180 views

How do I clean a sankey pump?

What is the best way to clean a sankey pump it after I use it so it doesn't get moldy inside?
4
votes
2answers
362 views

Rust in a plastic fermenter?

I've got a 6 gallon plastic fermenter - one of those food-grade plastic buckets Midwest gives you in the starter kit. I guess after our last brew, my brother and I carelessly tossed the remains of our ...
7
votes
2answers
1k views

How do I clean a 5 gallon root beer keg?

I was given a pair of Virgils kegs with root beer still in them, and I've been wanting to use them for homebrewing. I was at a brewery tour a little while ago and I was told that it's nearly ...
7
votes
3answers
4k views

How to clean grain bags?

I did a partial mash tonight, and I want to reuse my grain bag for future uses. I tried to rinse it out, but pieces of grain are still in there. What do you guys do to clean it out fully? Throw it in ...
6
votes
1answer
1k views

What do I need to refurbish a corny keg?

What do I need to prepare a used corny keg (picked up at a flea market say) for brewing? Should I replace the seals? Do I need a special tool to remove the posts? What products and techniques ...
7
votes
3answers
667 views

Spotless Carboys

I've acquired a handful of different size carboys over the years and all of them are serviceable, but one has some deposits/staining inside. It's near the top of the vessel, a few inches down from ...
3
votes
4answers
5k views

How can I clean an old carboy?

I received a 5 gallon carboy that I want to use but it has some crud in the curve of the bottle. What's the best way to clean this off?
9
votes
2answers
2k views

Keeping a bottle of no-rinse sanitiser

Some sanitisers, like star-san, chemipro oxi and betadine are no-rinse in certain dilutions. Star-san can additionaly be kept diluted in a bottle for months and used whenever one wishes. Can the same ...
6
votes
3answers
13k views

How do you clean and fill a keg manually?

What equipment is required to clean and fill a commercial keg (not one adapted for homebrewing), before paying for a full blown keg washer and filler? Is this even possible?
5
votes
6answers
3k views
10
votes
2answers
2k views

Cleaning difficult krausen ring off Better Bottle

My latest brew has left a ring from the krausen just past the neck of my Better Bottle. I am on my third soak with a little bleach and warm water. Usually this does the trick, but I'm almost thinking ...

1 2