I got a beer kit and it came with Easy Clean from LD Carlson. At first I was under the impression that I could use it to clean and sanitize. But now I'm not so sure. It looks like it was good for both until recently. I think I may be overly-paranoid when it comes to contamination, but want to be certain. From what I can tell, there doesn't seem to be a clear consensus out there on Easy Clean.

Is it safe to use Easy Clean to sanitize my equipment? I also end up with a residue after using it, is it ok to rinse tools with tap water before coming in contact with the brew? If Easy Clean isn't good for sanitization, can I use a bleach solution?

  • Hi any more info on what this really is " It is a no-rinse oxygen based compound for cleaning beer" not a lot of detail about what it really is
    – user13337
    Feb 21, 2016 at 17:59
  • IIRC, Easy Clean is a sanitizer (but you have to rinse). Best advice on how to use it -- don't. Get some Oxyclean (generic) to clean with and a bottle of StarSan to sanitize your equipment. Feb 22, 2016 at 20:56

3 Answers 3


Here's the product catalog for ld carlson chemicals : http://www.ldcarlson.com/public%20catalog/Chapter%2007.htm

Scroll down to 6019A, which is I believe what you have. No-rinse means it's a sanitizer, if it was just a cleaner they wouldn't call it no-rinse. I've used it many times, and it works great.

Just dilute as it suggests and soak all of your equipment on it. Give the equipment a shake and leave the no-rinse sanitizer on there, it won't impart any flavor to the beer if it's present in small quantities.

  • Sure enough, that's what I have. Thanks for translating no-rinse for me. I didn't want to assume that's what it meant, but glad to know I can use it in this way.
    – ntmw
    Nov 3, 2012 at 4:16

There are a lot of government regulations governing what can be labeled as a "Sanitizer". The product may work fine as a sanitizer, but if the company has not gone through the proper government channels and had their product tested as such (and I assume, pay a massive licensing fee to the government), then they can not put that on the label. If it's a product that needs to be rinsed, you will need to rinse it with boiled (or otherwise sanitized) water. Tap water contains micro-organisms (and especially warm tap water), so if you rinse with tap water afterwords, you've forgone the sanitization step. I use Iodaphor (iodine sanitizer) which is a no-rinse sanitizer. A product like starsan would also work well. I clean using oxy-clean soap, then rinse with hot tap water and sanitize with a no rinse product. A bleach solution also works to sanitize, however you must rinse after using bleach, again with sanitized water, or you've forgone that step. Good luck!

  • Thanks for the info, I'm in SE Asia and can't get some of the products I've read about, good to know I can use bleach in a pinch!
    – ntmw
    Nov 3, 2012 at 4:15

I use the LD Carlson Easy Clean. It is a no-rinse oxygen based compound for cleaning beer and wine-making equipment. Great for removing labels too. You could also use Star San Sanitizer it is a foaming acid anionic sanitizer that penetrates hard-to-see places. Both are no rinse and they do not stain and will not impart odors or off flavors. Both are great choices!

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.