Not having kegged, I don't mind what some people call the 'hell' of bottling. However, after bottling a 10% BGSA last night where I used a 2 quart starter (leading to a massive yeast cake) and whole leaf hops (which made it into the primary), a clogged/slow-flowing autosiphon, a slow-flowing bottle wand, all leading up to a 3+ hour bottling session, I have a new maxim and a question:

Maxim: Always strain out whole hops or use a muslin bag.
Question: Are there any lowish-cost alternatives to a bottling wand?

There's a good chance next time I'll just break out my march pump instead of the siphon next time as well, though I haven't had a problem in the past...

  • 1
    I'm confused. Was the problem that the inlet to your autosiphon and the tip of your wand got plugged up? (couldn't think of a less dirty way to ask that)
    – MStodd
    Mar 14 '12 at 17:17
  • <snicker> wait, wait, the "what" of my "what"???? It was both actually. A simple solution is to not use whole leaf hops or strain them out prior to fermentation, but I was looking to see if there was a different device to use as opposed to the wand.
    – Pietro
    Mar 14 '12 at 18:01
  • I always transfer from the secondary fermenter onto the bottling sugar and then into bottles. When I dry hopped my last batch that worked nicely. Leaving all the hops in the secondary and making for a very easy bottling. Mar 21 '12 at 23:23

I use a bucket with a spigot on the bottom for bottling. It was quite easy, even for a newbie like me.

  • 1
    you should attach a bottling wand to that so it fills the bottles from the bottom up to minimize oxidation. Your beer can get a cardboardy taste if exposed to too much oxygen, which can happen only when using the spigot on the bottling bucket.
    – Pietro
    Mar 14 '12 at 15:25
  • @Pietro Took your advice for my most recent batch. Filling went nice and easy. I'm looking forward to giving it a taste after a week or two.
    – Argyle
    Dec 11 '12 at 19:55

my brew set up doesn't have a valve at the bottom of my brew kettle yet and over the course of quite a few sessions (with an auto-siphon) I have found that a simple basket strainer with a handle at the bottom of the siphon tube (following the liquid level down) works awesome! Every time the siphon tube would get clogged and it is so frustrating, so I feel your pain. GOOD LUCK!

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.