Everywhere I read it is very cautious about oxidizing your beer. What is the worst case if your beer gets oxidized? It tastes funny?


You may get a "wet cardboard" or "sherry" flavor from oxidation, if it is bad enough. The real problem with oxidation is long-term stability. If you plan to drink your beer soon, it may not matter much. If you are going to age your beer for a while, you may experience staling reactions that will create these off-flavors.

It is important to know when you should aerate your beer (or wort) and when you should not. You want to add oxygen to the wort for yeast growth either as you put it into the fermenter, or about 24 hours after fermentation has started (with the aid of an oxygen stone). The only time that a home brewer really needs to avoid aeration (which leads to oxidation) is when bottling or kegging. (It has been widely debated in the brewing community whether or not Hot Side Aeration (the aeration of your wort while mashing, sparging and boiling) contributes to staling reactions. If you listen to the podcast linked in the comments for this answer, you will probably agree that Hot Side Aeration (HSA) is largely not a concern.)

One thing to note about long-term flavor stability, is that staling reactions are sensitive to temperature. If you have a beer that you feel has aged sufficiently, you can improve the long-term flavor stability by storing it cold. Every ten degrees of cooling (Celsius) slows these reactions by half to one-third, so a beer that may go stale in one month at room temperature, can last up to a year or more if stored in the refrigerator.

The bottom line is that it is important to avoid staling reactions due to oxidation, but there are degrees, and the primary problem is long-term flavor stability. You can mitigate these problems by avoiding aeration at bottling/kegging time, and storing the final product cold once it has aged enough.

  • 1
    In other words, the only time you want to aerate your wort is when it is cooled prior to pitching yeast. At all other times, be gentle with it.
    – STW
    Feb 17 '11 at 3:47
  • Good point on the storage stability. Horrible to have a descent beer and have it get worse instead of better.
    – Bullet86
    Feb 17 '11 at 4:24
  • 1
    Some prominent brewers disagree with you. The oxygen of most concern for oxidation is introduced to the beer after the yeast are finished.
    – baka
    Feb 17 '11 at 4:33
  • 1
    @baka I listened to that podcast, and edited the answer accordingly. I am all for eliminating paranoia when it does not affect the final product. Feb 17 '11 at 15:38

All that happens is that it tastes bad, typically "wet cardboard" or "sherry".

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.