So I want to exceed the scale of my saccharometer scale, which goes up to 25 °P (1.106 SG). Now, I am a programmer and exceeding is my thing. So:

As far as I understand, gravity is linear in nature.

Can I just take a sample of volume V, dilute to 2*V with drinking water, put my saccharometer in, read a gravity G and my correct gravity reading will be G/2 (of course other factors should be possible, but 2 is very comfortable)?


  1. brew
  2. take wort sample of 250 ml
  3. add 250 ml drinking water to sample
  4. measure 15 °P, measure 20 °C (or correct OG according to temperature)
  5. actual OG is 30 °P

Or are there any drawbacks?

1 Answer 1


The only drawback would be the larger sample size required and that you need very accurate (i.e lab grade) mass and volumetric measurement. Your proposed method is sound, though. A hydrometer indicating 1.106SG means that your measured liquid has 1.106 times the density (i.e. mass per volume) of water. So weighing identical volumes of wort and water and comparing their mass (which has a 1:1 relationship to weight given that the Earth's gravity coefficient may be considered a constant here) will give you an accurate gravity reading.

Just keep in mind that most conversions between OG, Brix and Plato assume a middle-of-the-road gravity and may adjustments for very low or very high gravities (the latter being what you're dealing with).

That said, such an insane high OG won't necessarily give you a better beer. That's exactly the reason why hydrometers generally don't go that high. However, there are density meters that do, although they may not be intended for beer production. Mostimeters, for example, such as are used in wine production, max out at a lot more, but you'll probably need a conversion table to convert the mostimeter reading into OG. The Brix refractometer used in syrup production also go a lot higher. A typical syrup weighs in at around 70 degrees Brix which is equivalent to a specific gravity of 1.355.

However, the fact that you an raise your OG doesn't mean that you should, though. :-) The challenges of brewing a 15+% ABV beer are huge, from yeast stress, higher alcohol production and esters going through the roof, to the alcohol/body balance (read: you need a high final OG to balance out all that alcohol or it will be as rough as a bear's hind quarters). It can be done, and there are a few "Tyrannosaur" beers out there with 25% ABV or more (although one might wonder if these are technically still classifiable as beers) but be aware of the difficulties, and the chance of ending up with a beer that will kill a cow at a hundred paces. If this sort of brewing is your thing, go right ahead, of course! Just realize that it's not just a matter of simply pushing up your ABV.

Good luck!

  • 1
    Thanks, and thanks for your remarks w.r.t. not-necessarily-better-beer. My thoughts actually evoked while developing a recipe for a Guinness Clone, but in its Imperial form. Actually, my first recipe turned out great and quite drinkable, at about 11 %. I accordingly called it Collapsar, and it was already scratching 25 °P. As I thought there is still space for a higher OG, I amped the malt bill a bit more, and it should come out > 25 °P next time, therefore my question:) Most of those 25 %vol tyrannosaurs are "ice distilled", AFAIR, like Eisbock. I reserve that as a future experiment. Commented Jul 11, 2021 at 18:19

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.