I fermented some 5 gallon mead from SG 1.146 to FG 1.058, but two calculators ([1], [2]) said the ABV was 11.7% - 11.9%. The yeast I used (Lalvin K1-V116 [3]) is rated up to 18% ("Alcohol tolerance up to 18%"). There were 30+ seconds between bubbles in the airlock (~47s). It was a constant temperature of 21C (70F) for about 5 weeks. Why is the ABV so low (and the FG so high)?

[1] https://www.meadmakr.com/abv-calculator/
[2] https://gotmead.com/blog/the-mead-calculator/
[3] https://www.lallemandbrewing.com/en/united-states/product-details/lalvin-icv-k1-v1116/

4 Answers 4


Patience. You rushed it. Give it 5 months. Then it will be done.

  • Can you provide reference? I've not heard of a fermentation requiring 5 months. I've heard aging takes 5 months though.
    – Chloe
    Sep 6, 2019 at 17:35
  • 3
    A high ABV ferment can take a long time. As the ABV gets higher the yeast’s metabolism slows down. The first 5-8% abv can be as fast as overnight sometimes, but then the next 5% can be take 5 times as long as the first 5% and after that, well...it just gets slower and slower until it just stops or there is no sugar left.
    – Escoce
    Sep 6, 2019 at 22:08
  • 1
    Q: Can you provide a reference? A: Does experience count? I'm a lazy meadmaker. The best meads I've made are the ones I forgot about for a few months. Cheers.
    – dmtaylor
    Sep 7, 2019 at 18:07

The basics

It's possible that your must / early mead simply doesn't have enough nutrients for the yeast to continue going gangbusters. When I say "nutrients" here, that includes more than just the sugars in the must -- yeast also need other things in their food in order to perform well, things like bio-available nitrogen, vitamins, and the like. When yeast run out of nutrients, they slow down.

Question for you: When you mixed up your must, did you include any yeast nutrients? If so, what kinds, and in what amounts?


In my initial recipes years ago, I used only a teaspoon of Wyeast yeast nutrient and two teaspoons of diammonium phosphate (DAP). Those batches took a while, and I thought that was just the way mead worked. Then I read around a bit, and found out that I could safely add more nutrients to speed things up, so for most of my batches since then, I've tripled the amounts -- one tablespoon of Wyeast yeast nutrient and two tablespoons of DAP.

I have two 5-gallon batches halfway finished right now. Out of curiosity, I decided to try scaling back on the nutrients as part of a controlled experiment in flavor, comparing these two batches (using the same basic clover honey, but each batch with a different yeast, Lalvin K1V-1116 and EC-1118) against my usual results. Both batches went quickly for a few weeks, and then effectively stalled at around a specific gravity (SG) of 1.060 -- but they're still fermenting, just veeeeerrrrrrrry sloooooowwwwwwly (about 0.001 SG points a week). Three months later, after confirming the speed of fermentation, I got impatient, and I just re-racked the one of them and added some yeast energizer to kick it up a notch and (hopefully) finish some time this year.

Possible remedy

If it looks like your yeast have simply run out of everything but the sugars, it might make sense to think about giving them a dose of additional nutrients. From reading a few labels, I've found that products labeled specifically as "yeast energizers" will sometimes mention "stuck fermentation", which is what I've got with my two batches, and what it sounds like you've run into. Have a look at those, read the directions, and let us know if you try any -- and how it turns out.

  • Yes I included a handful of chopped raisins and a teaspoon of Fermax at the beginning.
    – Chloe
    Sep 6, 2019 at 22:23

Check SG again in a week and see if it’s changed. If it has changed at all, it’s till fermenting. If it has actually stopped or if you are impatient, toss in some ec1118 to finish the job. k1v-1116 has actually already done everything it’s going to do taste and body wise to your wine so it’s not that important that it’s the one that finishes the job. It does most of its magic in the 1st 5 to 8% of abv.


You might also want to try to degas the wine. Build up of soluble CO2 great slows yeast performance. Also if your sample wasn't adequately degassed and you used a hydrometer that will give an articially high reading.

I agree with other posts regarding: Time, Nutrients and additional yeast to finish up.
I'd start with degassing though.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.