1

I use an aluminium counterflow wort chiller. To sanitize this I circulate the boiling wort through the chiller to clean and sanitize the inside

¿Do you recommend any acid or alkaline product for this? What can I do to make sure that is clean.

2

Chlorine or Caustic/Alkaline will corrode the oxide layer on aluminium; don't use them.

You could use a sanitizer that is based on Phosphoric acid or similar and another option would be an iodine solution.

You can circulate boiling water through the chiller to ensure there is no residue before storage and again before usage; that will sanitize it.

| improve this answer | |
1

I would suggest circulating boiling WATER through the chiller first to sanitize it, rather than using the wort to sanitize it. In that scenario, anything unclean in those tubes ends up in your beer.

I usually boil some water in my kettle before the actual boil (either while the beer is mashing for all-grain, or before anything else for extract) and send that through all of my pipes and tubes and equipment, to make sure they're all sanitized. Having seen the muddy, dirty water that comes out afterward, I would NEVER want that in my beer! It's shocking what kind of stuff can build up in those dark, damp environments, even when you rinse them out again after the brew day.

| improve this answer | |
0

I just boil my wort chiller in the wort toward the end of the boil before I use it.

| improve this answer | |
  • 1
    I cannot woth the chiller becouse is A Counterflow worth chiller (not inmersion) please read – cesar moro May 10 '16 at 18:05
  • You didn't specify any material other than aluminum. But I'd think that would be safe to immerse, and so would stainless steel (maybe not copper?). Some kinds of plastic are safe up to 500°F (e.g., silicon tubing) too. – Bolwerk May 13 '16 at 1:42
  • not posible to boil – cesar moro May 13 '16 at 11:29
  • Had these details been mentioned in the original post, I might've read them! – Bolwerk May 27 '16 at 16:54

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.