My hop bag came undone in my secondary while dry-hopping and now I have pellet hops directly in my beer. What is the best way to filter out the hops for bottling?


No need to filter. Just rack carefully from underneath them with the time comes.
Many people dry hop with pellets withou bags.

  • Or give the hops time to sink and treat like trub. Feb 10 '10 at 16:14
  • I've read about creating centrifugal force by stirring the beer and all the hops would be drawn to the center, allowing racking to be done from closer to the edge of the bucket. Any truth to that? Feb 10 '10 at 16:16
  • @BrianInBrooklyn I do that after every boil. You should ask that as a full question though. I think we'll get some good responses :) Feb 10 '10 at 16:42
  • PJ, a separate question outside of this post, or as an answer to my question? Not sure what you mean. Feb 11 '10 at 20:32
  • Separate question outside the post. Feb 14 '10 at 13:00

I've never used a bag when dry hopping, I just throw the pellets in. Usually after a week of dry hopping the hops are all at the bottom with any trub/yeast that settled out. I'd say to just rack as carefully as you already probably do.

  • I ended up filtering through a strainer into another bucket. I had hops floating, at the bottom, and in suspension; so it seemed to risky bottling through that. The extra step resulted in a nice clear beer. Feb 11 '10 at 20:31

Honestly, the easiest way is to zip tie a large nylon straining bag to the end of the hose inside the bottling bucket/keg and rack carefully. Anything that gets in gets stuck in the bag. It has worked flawlessly for me every time, and it doesn't get clogged like the nylon over the racking cane as it has a ton of surface area for the beer to get through.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.