1

A lot of the force carbonation guides that I have seen say to set the psi to 20 and leave it for 4-7 days.

Why don't we just set it to 40 (or higher) and wait 2-3.5 days?

2

I would assume higher pressures aren't used because of the greater possibility for overcarbonation. If you carbonate a little too long at 20 PSI your beer will be less overcarbonated than if you overcarbonated at 40 PSI. The room for error/deviation is greater at a lower PSI. Perhaps there is a more scientific answer...

  • yep, there's a greater chance you'll overshoot with a higher pressure – mdma Oct 18 '14 at 13:33
3

For what it's worth, I usually set mine at 40psi for 24 hours, then 20psi for 24 hours, then 10psi for 24 hours, and fine tune from there. I usually serve at about 8psi.

Naturally, I pour myself a pint at each interval for quality control purposes. ;)

  • 2
    I do the same. And "quality control" is one of the perks of being a homebrewer! :) – mdma Oct 18 '14 at 13:34

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.