network profile
| bio | website | |
|---|---|---|
| location | Upper Makefield Twp, PA | |
| age | ||
| visits | member for | 3 years, 4 months |
| seen | May 26 '10 at 12:02 | |
| stats | profile views | 27 |
|
Jan 12 |
awarded | Yearling |
|
Jan 12 |
awarded | Yearling |
|
Sep 7 |
awarded | Nice Answer |
|
Jan 13 |
awarded | Yearling |
|
May 26 |
awarded | Scholar |
|
May 26 |
accepted | What is conversion? |
|
May 20 |
answered | Is there a brewing software that supports late additions? |
|
May 20 |
answered | What is the best book for beginning home brewers? |
|
May 12 |
comment |
How much water does a wort chiller use? +1 for the Therminator and Thrumometer combo - I love mine and get about the same chill rate - starting with 60°F water I chill 10 gallons of post-boil wort down to ~70° in less than 10 minutes using about 20-30 gallons of water which I retain in the sink for cleanup. |
|
May 4 |
comment |
Dispensing beers at two different pressures? Assuming cost is not an option, split it into a Nitro side and a CO2 side. Its always interesting to taste the difference in your ESB when you push it with Nitrogen instead of CO2. But then, I almost always have a stout on one tap and an ESB or IPA on the other... |
|
Apr 28 |
comment |
Fermenting 1/2bbl and 1bbl batches PJ, I think I have been following you for a while - you are @hookedonwinter right? I'm @jmdenmark and like yourself, I only contemplate brewing for a living. |
|
Apr 27 |
answered | Buying equipment in bulk |
|
Apr 27 |
answered | Fermenting 1/2bbl and 1bbl batches |
|
Apr 27 |
answered | How do you clean and fill a keg manually? |
|
Apr 27 |
revised |
Choosing a good refrigerator/freezer for kegerator conversion Corrected typos |
|
Apr 23 |
answered | Choosing a good refrigerator/freezer for kegerator conversion |
|
Apr 12 |
comment |
How tight should bottles be capped? Keep the bottles. The 335s should work fine with 26mm caps. I guessing its either the caps or the capper that are the issue. The european bottles may have a slightly thicker glass rim which is compensating but I haven't had any issues capping US ones with my capper so just try a different source for your caps next time. |
|
Apr 9 |
answered | How tight should bottles be capped? |
|
Apr 8 |
answered | First time! Brew guy |
|
Apr 8 |
answered | Using flakes in a mash |
