0
votes
2answers
84 views

How long does wine take to de-gas without much agitation

I've made a few batches of wine and they seem to turn out alright except for being extremely frothy. I think in the past I've made the mistake of exposing my wine to oxygen when trying to agitate the ...
0
votes
2answers
198 views

20% sugar, water and yeast brew smells awful quickly, how to fix?

I've got one complete, and one brewing batch of this "Alcotec Vodka Type Spirit" ...
0
votes
1answer
73 views

What are the competing formulas for determining target Residual Alkalinity from SRM?

In John Palmer's spread sheet, he calculates the low target RA as SRM * 12.2 - 122 He calculates the high target RA as (SRM-5.2)*12.2. This BYO article states that `target SRM = 0.14 * ...
0
votes
1answer
43 views

Step Infusion question

In the most recent Zymurgy, there is a recipe that involves step infusion mash. It's not quite explained how to get the wort off the grain. So I was wondering how a step infusion mash works? I ...
2
votes
2answers
281 views

Mash Tun vs Lauter Tun

I've heard of both for very similar uses. What is the difference between a mash tun and a lauter tun? Or more generally, what is the difference between a mash and a lauter? I found this wiki article ...
4
votes
4answers
128 views

“Dry hop” etymology

What exactly the "dry" means in the "dry hop" expression ? Does it refers to a dry flavor of hop in beer? Or because the hops were added to beer in a dried form? Could it be called or explained as ...
0
votes
3answers
62 views

Can you use tincture method to infuse fruit?

Does anyone know anything about Tincture? I know adding fruit to beer can be unsanitary. Would it work to Tincture fruit and add to my brew secondary?
3
votes
2answers
96 views

Spunding CO2 from 3 keg fermentors

I'm starting to ferment in kegs, and want to naturally carbonate my beers by using a spunding valve. My batches yield 3 kegs, and I'm already using a 4º keg to aerate them after no chill and after the ...
1
vote
1answer
30 views

What is the correct gravity for white wine?

Bought a Youngs u Brew 7 Day wine kit. Similar to this: https://www.thehomebrewcompany.ie/winebuddy-sauvignon-blanc-30-bottles-p-532.html The instructions says that I should only bottle when the ...
2
votes
1answer
111 views

Troubleshooting wild pours from kegerator

I recently bought an Igloo 6 ft^3 kegerator as my first venture into kegging. It worked very well the first day but has been pouring wildly ever since. The beer line is 4.5 feet of 3/16" PVC; based ...
0
votes
1answer
47 views

Flotec Utility Pump for Wort Chilling?

After doing a bit of Googling for pumps in order to circulate water through a wort chiller (it being below freezing outside in Maine, I'm worried about using our outside hose hookup for water), I saw ...
3
votes
2answers
191 views

Does bottling conditioning change the nature of the carbonation?

There's a common opinion that bottle conditioning yields carbonation that is qualitatively different from what's produced by force carbonation. Typically, it is claimed that bottle conditioning ...
0
votes
2answers
133 views

Over-pitched yeast- how to avoid autolysis?

I am doing my first batch with a yeast starter. I harvested yeast from a commercial Belgian trappist ale, built it up for a couple of days, cold-crashed it, decanted off the majority of the mini-wort ...
2
votes
1answer
48 views

Airlock and Stopper Rocket

Brewed up a batch of wort yesterday and it all went well. Good sanitation, quick cool down, and yeast activated. Set up the carboy in a controlled temp room (74) and fermentation started within 4 ...
0
votes
0answers
5 views

What size pot for 3 gallon BIAB set up? [duplicate]

I am looking at starting a simple 3 gallon biab set up, using an electric stove top and three 1 gallon fermenters for batch splits. How can I calculate the required pot size for this configuration?
1
vote
2answers
97 views

Aerating no chill corny keg fermentors that don't seal

I'm very interested in ferment in corny-kegs after reading some questions about that here on this stackexchange. I will try it next batch, but there is a question about aeration/no chilling method: ...
2
votes
1answer
75 views

Plato degree to specific gravity conversion question

I have a question regarding the conversion from Plato degrees to specific gravity, and the widely used value of 46ppg for sugar dissolved in water. According to wikipedia, plato degrees are defined ...
0
votes
1answer
116 views

Equipment for Raising Mashout temp

We are currently using a pump to circulate the mash through a coil in the heated sparge water, this works well and reaches mash out in under 20 min. The only worry is with the water in the sparge ...
0
votes
2answers
43 views

How does the fermentation schedule look when adding flavor elements?

Is there a guide for when & how to add specific ingredients to the fermentation process? For example, if I want honey, lemon, ginger, banana, raspberry, etc. - when's the best time to add that ...
1
vote
3answers
212 views

how long can I stay in an open primary fermentation?

I would like to go from the primary fermentation to the bottles with an open fermentation. Can I top off with water to get the full 5 gallons? Also would you primary an open fermentation for more ...
0
votes
2answers
60 views

Zymurgy, Oenology … but what about spirits? What's the “ten penny” word for still masters?

This is just a question about terminology. Those who are into brewing and beer making are zymurgists. Those who are aficionados of wine are oenologists. But what does one call a expert in ...
1
vote
2answers
182 views

Should the Munich Water Profile be used for Bavarian Hefeweizens?

I'm having trouble searching for the correct water profile to be used for a Bavarian hefeweizen. In the book Designing Great Beers by Ray Daniels, Munich -- or more properly, Bavaria -- ... has ...
3
votes
1answer
72 views

Corny kegs: Is there a difference between the in coupler and the out coupler?

I have black and grey couplers, one says "in" and the other says "out", but they look exactly the same to me... Does it matter if I use them indiscriminately for gas in/beer out lines?
0
votes
1answer
56 views

Did One Step kill my batch?

I have been brewing for a while, and have a routine I go through, part of which includes using very hot water (185+) to sanitize my new caps. On the advice of another brewer, I tried One step on the ...
1
vote
1answer
75 views

Should I prime bottles of ginger beer as finishing gravity 1027

I had a batch of ginger beer OG 1072 FG 1027. (Crabbies by the way has a FG of 1033) I primed the bottles with a 1/3 tsp and everything was fine. The last bottles 2 months later were pretty fizzy ...
3
votes
2answers
81 views

When to stop the whirlpool pump in an immersion whirlpool chiller?

What is the best temperature to stop the pump in an immersion whirlpool chiller ? And what about the time to wait the trub settling vs wort temperature ? Consider both Ale and Lager.
2
votes
1answer
101 views

Does cider in oak barrel need airlock during secondary fermentation, for the gas to escape?

I have 200 litres of cider which was racked yesterday into 2 x 100 litre oak barrels. Before racking, the cider was still fermenting at a rate of about one bubble (through the airlock) per two ...
0
votes
3answers
173 views

Off-flavour after carbonation

I tasted the beer when it came out of the fermenter and it was great. I cooled it to 4 degrees then I racked it into the keg and force carbonated - about 1 minute at 300kPa, a good few minutes of ...
1
vote
1answer
68 views

Can I cold condition outdoors?

I live in an apartment with a tiny fridge and I cannot afford to use all the space for beer bottles. The average daily high temperature in the region is 6 deg C (42F) while the lows drop down to 1C ...
3
votes
3answers
204 views

Which is worse: a weak boil or boiling with a lid partially on?

I finished Papazian's book The Complete Joy of Homebrewing last weekend and learned that a vigorous boil is necessary to isomerize the alpha and beta acids in hops which makes these bittering acids ...
2
votes
2answers
393 views

How long must water be boiled to remove temporary hardness (bicarbonates)

From Papazian's Joy of Homebrewing: In the US temporary hardness is determined by a measure of bicarbonates [2(HCO3)].The hardness that bicarbonate ions contribute is temporary because it is ...
0
votes
3answers
130 views

Why are there raisins floating in my ginger beer?

When I buy homemade ginger beer (in South Africa), there are often small black raisins floating in it, about 1cm in diameter. Why did the makers decide to put them in?
0
votes
2answers
33 views

Can I still use malts that have melted?

I inherited a slew of brewing equipment and ingredients from a friend, but am not sure if it is usable, it's been in storage for a while. Specifically the malts have melted into chunks(a dry imported ...
1
vote
2answers
102 views

Overload of bittering hops, any “fixes”?

I've had a 5 gallon all-grain batch of John Palmer's Elevenses in primary for just over a week. When I was brewing, I haphazardly dumped twice the prescribed amount of bittering hops (German Northern ...
0
votes
2answers
131 views

can i bottle cider at 150 sg it has been still for a month

my cider started at 190 and now is 150 and has been still for about a month, can I drink and bottle it at this time?
2
votes
2answers
147 views

Long cold crash for an ale. Benefit or harm?

I cold crash my ales to reduce sediment and clear the beer. My understanding is that even as little as a day would do that. But my brewing partner and I have often (due to time constraints) kept them ...
2
votes
2answers
125 views

Fermenter head space and airlock hole

Hi folks I'm after a bit of advice as its my first time doing home brew I'm using Wilkos dark velvet stout. As it states on the tin to make 40 pints fill, to 23 litres. Now I have a 23 litre ...
3
votes
2answers
1k views

Left bottles in car overnight - am I screwed?

Last night I bottled an extract kit with a friend, divided bottles, drove home, and left them in the car overnight 6pm to 6am. It got down to 5 degrees F, but the beer did not get cold enough to ...
0
votes
2answers
233 views

My beer has little to no hop flavour or bitterness. What is going wrong?

Extract brew. 23L boil. Summit - 60 min boil approx. 125g, Glacier - 30 min boil, approx. 75g, NZ Wakatu - 15 min boil, approx. 50g. All fresh hops, vacuum sealed. 3kg liquid malt extract added ...
1
vote
0answers
88 views

Calibrating PID. Temperature probes PT100 not linear

I am working on my HERMS setup and have a few PIDS and temp sensors to work with. The problem is that the temp sensors show about 5 degrees celsius off when I first set it up. I Raised the water in my ...
2
votes
2answers
66 views

cold crash bottled ale

I have bottled my ale, it's been bottled for 2 weeks in the warm. I want to drink it in about a week but it's still very cloudy. Should I cold crash to clear it or hope that in another week it will be ...
2
votes
1answer
37 views

Do I need an anti-microbial additive in my plum brandy mash?

Basically I pitted and smashed 10 lbs. of very ripe plums; heated the pulp, skins and juice to like 120°F and added 3 gals. of distilled water and 5 lbs. of sugar. Waited for it to cool below 90°F ...
2
votes
2answers
93 views

How much Chloride in PPM is too much for All Grain?

I passed my water through those cheap water filters and sent it to Ward Industries for a water test. It came back with 61 PPM of chloride. In the 3rd edition of the Joy of Homebrewing, Charlie ...
2
votes
1answer
71 views

Bucket Heaters and Condensation safety / Lid considerations

EDIT - After many different attempts, I've learned these bucket heaters definitely shut them self off when the water starts boiling (and turn back on when the water drops somewhat below boiling), ...
1
vote
3answers
78 views

Looking for process improvement suggestions

I just did my 4th brew, my OG was lower than expected, and I'm looking for help with process improvements. I'm doing an all grain process. I have an 8gal kettle, a 2gal kettle, and a 0.5gal kettle. ...
1
vote
1answer
26 views

Can I deal with diluted amounts of preservatives and still get good hard cider?

On a whim I decided to throw some Cider in a bucket, so I went to the store and grabbed some. I took a chance and bought 2/3 no preservatives and 1/3 preservative (4.5 Gallons total) in order to ...
2
votes
2answers
98 views

Saison fermentation stuck around 1.035

We are brewing a Saison-style, all-grain beer. We had a multi-stage, multi-temperature mash process requiring us to get the mash to a set temp then hold it for a period then increase the heat and ...
1
vote
1answer
107 views

Would insulation on a kettle help a boil at all if the lid was off?

I bought an 1800 watt induction cooktop and 2 1000 watt bucket heaters that unfortunately were not able to boil 6.5 gallons of H2O in 90 minutes, although it appeared to get close and perhaps 0.5-1.0 ...
0
votes
0answers
12 views

Temperature at which to carbonate brew? [duplicate]

I am very new to home brewing and have spent hours trawling the web to find answers to questions, however, this is the one question im struggling for an answer to, so any help would be much ...
0
votes
0answers
21 views

Co2 volume vs weight [duplicate]

I'm looking into getting started with kegging my brews. From what I've read, one hooks up the CO2 at a certain pressure to obtain a certain volume of carbonation. However, in filling the tanks, the ...

15 30 50 per page