Yeasts are micro-organisms used in brewing to produce alcohol during the process of fermentation.

learn more… | top users | synonyms

2
votes
2answers
128 views

Is my Kolsch still a Kolsch if I used the wrong yeast?

I followed Jamil's Kolsch recipe to the letter but pitched WLP 833 into my carboy thinking it was a Kolsch yeast. I found out that it's actually a different German yeast strain. Will this still be a ...
2
votes
2answers
173 views

Yeast comparison source

Is there a good source that compares the commercially available yeast strains from the most common sources like White Labs and Wyeast? I am thinking of something with homebrewing experience built ...
2
votes
1answer
195 views

Dropped the temperature as it was getting out of control, did I shock my yeast?

Making an IPA with an OG of 1.069, we pitched at 70°F with good ol' Safale US-05, just dry out of the packet as I've always done with US-05 with good success (I tend to trust it a little too much ...
2
votes
4answers
207 views

yeast cell count importance

I have a had a question for quite some time that nobody has been able to answer. The question is more academic or theoretical than it is practical. Perhaps the community here is a tad smarter ...
2
votes
2answers
232 views

Pitching yeast the next day?

If I wake up and decide to brew an impromptu batch, can I begin a starter at the same time and just pitch the next day? Seems comparable to no-chill brewing as far as contamination concerns, though ...
2
votes
2answers
444 views

Top Cropping Cell Counts

TLDR: I have no idea how much top-cropped yeast to pitch into a ~1.055 OG Octoberfest (5.5 gallons) I am planning on making an Octoberfest (late I know) on August 18th. Instead of making a boring ...
2
votes
1answer
166 views

If some of the yeast doesn't get into the fermenter does it matter?

I just made my first home brew. I have learned many lessons including that if I move the fermenter to its resting place after I add the yeast some of the yeast gets stuck to the glass, and I can't ...
2
votes
2answers
210 views

Are Yeast Nutrients actually necessary for brewing Beer?

I typically bought Yeast Nutrients from Northern Brewer for my yeast starters and extracts. I went to my LHBS today to purchase some DME for an extract and asked for nutrients for the beers that I ...
2
votes
3answers
120 views

Using Campden in water

I am using campden in water to remove chlorine and chloramine. I have heard that it may inhibit the yeast. Should I leave it any length of time after use in order to minimise yeast inhibition?
2
votes
1answer
461 views

How long to ferment for?

I made a coopers IPA can 2 days ago and it's currently fermenting away (bubbles every few seconds) and is at around 21-24 deg c (69-75 deg f) which is what it says as the label. The can says to ...
2
votes
2answers
493 views

What differentiates the lag phase from fermentation?

When making a starter, the intent is to make yeast. We use stirplates in part to continually oxidize the wort, enabling the yeast to multiply. In this question about starter oxidation, one of the ...
2
votes
2answers
80 views

Selecting yeasts

As I understand it, the selection of malt (and adjunct), hops and yeast all affect the flavour of a beer in important ways. However, while you can taste the malt and other grains to get a feel for ...
2
votes
1answer
119 views

Will blending a highly attenuating yeast with a highly alcohol tolerant yeast cleanly lower the final gravity in a very high gravity ale?

I've brewed some ridiculous beers in the past, my highest original gravity resulting in over a final 18% ABV using WLP099 yeast. That particular beer turned out well for how inexperienced I was when ...
2
votes
1answer
116 views

How does a beginner manage their yeast farm?

I'm about 6 batches into my AG brewing and my fridge is slowly getting filled with jars of yeast I've been harvesting, each labelled so I can tell which batch they came from. So far I've been ...
2
votes
1answer
86 views

Is it normal for WY2112 to stall?

I've made three batches with the same colony of WY2112, and each one of them has exhibited the same odd behavior. I pitch a good quantity of yeast into oxygenated wort at 65 degrees F. Within 24 hours ...
2
votes
2answers
1k views

US-05 Fermentation Temperatures / Top Cropping

Brewed a 1.060 OG IPA last night (extract), pitched a packet of US-05 reconstituted with 5 ounces of water. Pitched at 68 degrees, but I wanted a clean fermentation with minimal esters, so I have the ...
2
votes
2answers
335 views

Reusing yeast slurry after cold-crashing.

I let a lager sit for 10 weeks in a secondary until it was very clear (the cold helped with clarity), and then used the yeast slurry at the bottom as a starter for another batch. I usually make a ...
2
votes
2answers
723 views

Which fermentation temperature should I favor?

I am doing a dual brew this weekend. First up will be my Engine 97 Steam Beer (aka California Common - see recipe here: http://www.lootcorp.com/recipes/engine-97-steam-beer.html - credit for original ...
2
votes
1answer
702 views

How much sugar should be used when priming with Brett?

I've read that Brett will consume sugars that other yeast strains cannot. Is this true? I couldn't really find too much information on it. If this is the case, should I be worried about over ...
2
votes
2answers
64 views

Buying Yeast Online and Temperature during Transit

I buy everything from Northern Brewer and it takes UPS 5 days to ship to me (If I'm not home early enough from work on Friday, I have to wait the weekend too). Next week is going to have three days ...
2
votes
2answers
129 views

Violent fermentation | One day after brewing | Liter spillage from the top

I am an amateur brewer just cooked my third batch ever three days ago. This time with a couple of friends (which also bought the ingredients from a place I haven't before), so this time I used a ...
2
votes
3answers
74 views

Yeast starter timing question

Can anyone give me a time recommendation on how long I should allow a yeast starter sit on the stir plate for before pitching? I usually make it the night before (about 18 hours prior to pitching) ...
2
votes
4answers
219 views

Yeast cake and Septic tank

I just transferred my brew to the secondary fermenter (yes, it's not necessary, but I want to help clarify the brew). Where we live, we have a septic tank sewer. I was just wondering if there could be ...
2
votes
1answer
310 views

How quickly do I let the fermentation temperature rise if it starts off too low?

I brewed something like a Black IPA today (hoppy and dark). I ferment in carboys in a chest freezer with an external temperature control. It is frigid today, and the garage where the chest freezer ...
2
votes
1answer
194 views

My latest batch of Must had half a dozen floating spots and low sediment, what happend?

Sequence of Events: March 21st - Boiled water and honey and placed in sanitized plastic bucket with airlock (containing sanitary solution: Iodophor). Bucket placed in basement to cool overnight. ...
2
votes
2answers
447 views

Is it better to make yeast slants from a bottle after single stage fermentation or from the primary?

I am considering making some yeast slants to try to start a little bit of a yeast bank. In my research i have read about folks making a starter from the yeast in the bottom of a bottle conditioned ...
2
votes
3answers
863 views

Wyeast 3944 Slow to Work

I wanted to see if anyone else had this experience - I'm on my second batch of a Wit bier with this yeast and have noticed that in both scenarios - after two weeks the Krausen has not fallen. The ...
2
votes
3answers
816 views

Wrong yeast…cloudy beer?

I was planning to make an IPA and was planning to use wyeast #1056 but i think that I mixed up my yeast with another guy at the store cus after I pitched i noticed that the yeast I had added was ...
2
votes
2answers
215 views

What is yeast's fermentation (life), cycle in brewing?

Hopefully, I asked that correctly, once the yeast is pitched within a number of hours it begins to consume the fermentable sugars in the wort, create CO2, etc. once fermentation is completed, if I'm ...
2
votes
1answer
181 views

Yeast starter left out of refrigerator, is it OK?

I created a yeast starter from some yeast from my primary fermenter and some DME following standard steps and the fermentation looked great. However, I went on vacation and forgot to put my yeast ...
2
votes
1answer
148 views

Off flavor of kegged Wheat beer

I brewed an AG wheat beer and used WLP351 as the yeast for this. Let it sit in the primary for near two weeks (66°F/19°C) and I did do a secondary on it for about another weak to try and decrease the ...
2
votes
1answer
473 views

Use of servomyces in a yeast starter

1 servomyces capsule is the correct dose for 5 galons of wort. If I want to add servomyces to my 1.5 litre yeast starter should i break open the capsule and use only part of it? or is it safe to add ...
2
votes
1answer
243 views

Can you add more yeast into a batch of cider if you think you've killed it?

Ok, so I’m really new to this I started off making cider Since I juiced my own apples, I used the method of pasteurisation that kills off wild yeast by heating the gallon of juice on a stove while ...
2
votes
3answers
531 views

wild yeast taking over?

I brewed a belgian triple last week. I had a starter going using white labs trapist yeast but it didn't take off, must have been a bad vial. In the meantime the batch was sitting in the carboy ...
2
votes
1answer
383 views

odd film on my cider

I went to rack my cider into a secondary, pulled off the lid of my primary and saw this whitish film. I racked it and the film stuck to the sides of the primary as the cider level dropped off. ...
2
votes
0answers
122 views

If I live in a country where alcohol is prohibited, how to I deal with these obstacles? [closed]

I will have access to wheat and barley, only fresh, nothing malted. I have been reading online a little on malting. So this step doesn't seem to be an issue. My real issue is yeast. Assuming that all ...
2
votes
2answers
63 views

Does current science have any idea of what components of the biology of yeast make which desired characteristics of beer

http://www.theguardian.com/science/2014/mar/27/designer-chromosome-brewers-yeast-eukaryotic-saccharomyces-cerevisiae If you haven't heard of this story you have GOT to read it. "Scientists ...
1
vote
3answers
513 views

Adding boiling water to raise temperature during fermentation

Beer was getting cold so in a desperate attempt to raise the temperature I put near boiling water into the container. So 450ml into 23litres of beer. The beer had only been brewing for 4 days. Will ...
1
vote
4answers
3k views

Measuring yeast activity by collecting CO2

I've been thinking about ways to measure the progress of the primary fermentation, looking for an alternative to taking samples and measuring the gravity. I was wondering if anyone has tried to ...
1
vote
3answers
290 views

Do I need to double the yeast when splitting the batch into two fermenters?

I am brewing 5 gallon batches. I end up with 5.5 gallons after the boil so I split the batch evenly into two(2) Corney kegs fitted with an air lock on each gas in. I ferment in the two kegs and then ...
1
vote
4answers
2k views

Bad (dead) yeast? What now?

Brewed an ESB yesterday, pitching Wyeast 1028 @ 70 degrees F. Stirred and shook carboy for oxygen, then airlocked and moved moved to the basement. This morning, carboy is @ 71 degrees F with NO ...
1
vote
3answers
596 views

What happens if I Double Brown Ale

I'm thinking about making something like Frambozen from New Belgium from brown ale and added raspberries. However it's more of a sipping beer / higher alcohol content than the regular brown ale. ...
1
vote
4answers
124 views

Why toss the starter wort?

I've wondered about this for a while: most 'how to make a yeast starter' instructions I've seen suggest using only the yeast-rich sludge, and tossing most of the starter medium. This makes sense if ...
1
vote
1answer
148 views

Bottle conditioning

More reading - this time about bottle conditioning. If my yeast attenuation level is say 80%, does that mean there would be enough sugars in the bottle for the yeast to carb the beer? Or would priming ...
1
vote
2answers
91 views

Why Reuse Yeast?

Sorry for seeming clueless, but I am clueless. I've only brewed about 15 batches, or less, of extract beers. Thus far, I've always bought prepackaged recipe "kits" similar to a Betty Croker cake mix. ...
1
vote
3answers
489 views

Waited 6 Days after boil to pitch yeast, Wort had what looked like mold, what can be done?

Like the title says, after I chilled my wort I realized the kit I ordered did not come with yeast, an error on the packers fault. Because of my work schedule I wasn't able to pitch the yeast for about ...
1
vote
3answers
126 views

ReaLemon's preservatives

I'm trying a simple recipe for ginger beer (Method 1 here). Would using ReaLemon be ok instead of an actual lemon? I understand that preservatives in an apple juice can harm the yeast when making ...
1
vote
3answers
1k views

US-05 Fermentation Temps

On the package of the US-05 it says it's temperature range is 58-75F. However, all the reading on forums I am finding people tend to the lower end of the spectrum, even calling upper-60's to be too ...
1
vote
1answer
102 views

Gross layer of foam at the end of fermentation and aging

I experienced few times a gross layer of foam when fermentation finishes. But the beer was fine, no symptoms of contamination neither off-flavors. I never measure the depth of foam but it can have ...
1
vote
2answers
570 views

Adding yeast to secondary

Okay, I am making a strong (imperial-ish) red ale. My original gravity was 1.081. I intended to bring it to a final point at most of 1.020, or if I can even lower. I was using 2 packs of WLP004 ...