Yeasts are micro-organisms used in brewing to produce alcohol during the process of fermentation.

learn more… | top users | synonyms

4
votes
3answers
778 views

Would Lalvin's 71B-1122 make a good cyser?

From Lalvin's website: ...has the ability to metabolize high amounts (20% to 40%) of malic acid. It also says that it produces "rounder, smoother..." wines. I'm thinking this would be a nice ...
4
votes
3answers
2k views

Wyeast pack arrived already inflated - keep in the fridge or not?

Like the question says, the pack arrived pre-smacked! I'm making a yeast starter before I brew so that'll tell me whether the yeast is ok, but what I need to know is whether to keep it in the fridge ...
9
votes
4answers
784 views

Harvested Yeast - What are these layers and do I have too much?

I harvested yeast a few weeks back from my hefeweizen (Wyeast 3068) which I had open fermented. To harvest, I scrapped it right off the top, after ~36 hours of fermenting, with a sanitized spoon. I ...
4
votes
2answers
404 views

Making a starter when reusing yeast

I want to reuse the washed yeast from a previous batch of beer in my next batch. Should I make a starter for it? If so, how much of it? I looked at MrMalty, and it seems to me they tell me not to make ...
0
votes
1answer
283 views

Troubleshooting a stuck fermentation with Ringwood Ale

I'm brewing an IPA using Wyeast 1187 (Ringwood Ale) and it seems stuck. I'm brewing 19L (5G) with an OG of 1.052 and pitched two (smacked) smackpacks of 1187 straight into the primary bucket. I used ...
1
vote
3answers
2k views

Can Dried yeast function at a low temperature?

I started my first batch of home brew lager around 24hrs ago I aerarted it and it was at 20 Degrees celcius but does not appear to be fermenting..... I know people say I have to give it time as I read ...
3
votes
3answers
761 views

What is the purpose of stepping up a starter

Very simply, what is the difference in pitching 100 billion cells into a 1L starter and into a 2, 3, 4L starter of, say 1.040 OG? I understand the logic with a 5.5 gallon batch of beer: you want ...
14
votes
1answer
406 views

Always making a starter vs. following package description

I have noticed that the smackpacks say on the package that the package is meant for a 5 gal. batch and that you should pour the pack directly into the wort. On the otherhand - nearly everyone tells ...
1
vote
1answer
436 views

Are cheap poratable USB microscopes good enough to count yeast, and check vitality?

I have read that a 400x magnification is right for counting yeast on a hemocytometer, and also using dye to check vitality. I'm looking at using a cheap portable $50 USB microscope. They are rated ...
5
votes
2answers
456 views

Yeast, CO2 Toxicity with mead and beer

Degassing CO2 during early fermentation is important for wine and mead. But why not for beer? I'm getting back into mead making and see plenty of references to degassing the must during early ...
2
votes
2answers
509 views

Top Cropping Cell Counts

TLDR: I have no idea how much top-cropped yeast to pitch into a ~1.055 OG Octoberfest (5.5 gallons) I am planning on making an Octoberfest (late I know) on August 18th. Instead of making a boring ...
3
votes
1answer
525 views

Using a low alcohol tolerance yeast in potentially high alcohol must

i have posted this question on other forums but haven't really gotten a good answer. If I am attempting to create a sweet mead and want to avoid backsweetening (lots of additional tweaking) or ...
3
votes
1answer
761 views

How much yeast nutrient does starter wort need?

I am going to make a batch of wort to be stored in 1 quart jars to make starters from. I'd like to add the yeast nutrient (diammonium phosphate and yeast hulls) at this time so I don't have to mix it ...
5
votes
2answers
239 views

Possible to intensify/increase the amount of yeast flavor?

I will soon be making a hefe and will be using wyeast's 3068. In recent hefes I have made, I have always desired much more intensity in the flavors provided by the yeast strain. The only method i am ...
6
votes
2answers
625 views

Measuring yeast in a slurry

Please tell me if I'm being overly simplistic here. I was reading the book yeast by Chris White and Jamil Zainasheff. In the book, they talk about measuring how many cells are in a slurry by using a ...
5
votes
1answer
750 views

What flavors come from fermenting S-04 on the warm side?

I brewed this 1064 OG recipe and used my reverse flow chiller to get it down to 74F (could have gone cooler, but my starter was at 76F or so). It fermented like nuts (over 1.5 gallons of krausen ...
4
votes
3answers
5k views

Alternative/homemade yeast nutrient?

I forgot to add nutrient to my must when I put it in my carboy the other day (first time brewing mead). I fear I won't be able to get to my homebrew store before it's too late, so I'm wondering if I ...
1
vote
4answers
3k views

Measuring yeast activity by collecting CO2

I've been thinking about ways to measure the progress of the primary fermentation, looking for an alternative to taking samples and measuring the gravity. I was wondering if anyone has tried to ...
1
vote
1answer
277 views

My yeast isn't floating at the top of my mead

I just made my first ever batch of mead. I used a stronger yeast (a wine yeast) and the package said to let it sit for about 15 minutes in 50ml of warm water. I did that and added the water and yeast ...
4
votes
2answers
1k views

How much yeast do i need for 1bbl batches?

We are planning on brewing 1bbl batches, but we are kind of stuck on how much yeast we need. We contacted White Labs but their 1bbl pitchable yeast is way too expensive. I want to know what would be ...
6
votes
2answers
887 views

Storing Yeast Slurry

If I take a yeast slurry from a batch of beer, wash it and store it in a sanitized container - how long can I leave this yeast slurry in the fridge before repitching? I'm thinking of leaving it in the ...
6
votes
3answers
2k views

Ideal fermentation temperature

I'm just finishing up a DIY fermentation chamber made from a chest freezer, reptile tank heater, and a temperature controller. Now I just need to figure out what temperature to set! Most yeast ...
3
votes
1answer
383 views

I moved a Kolsch to secondary after 4 days. Should I repitch yeast?

This is my first batch ever, a Kolsch from a kit. It fermented like crazy the first 2 days, but after 4 had stopped bubbling, so I moved it to a secondary container. As I was transferring, I noticed a ...
5
votes
3answers
2k views

How can I restart fermentation on a stuck strong dark belgian ale?

What can we do to restart fermentation that got stuck over the winter? Our club brewed about 7 gallons of this recipe in November. Primary went well, but then the weather got cold and the yeast went ...
4
votes
3answers
2k views

Do yeast die after bottling?

Do yeast die after bottling? My second batch of beer have been stored in bottles over a month now without producing any co2. I want to add some priming sugar to start the fermentation again, but I'm ...
5
votes
1answer
189 views

Flanders Red from Brewing Classic Styles

I am interested in brewing the Flanders red that is found in Brewing Classic Styles. Jamil mentions using the Wyeast 3763 or WLP655 and leaving it sit for a year until the pellicle forms then falls ...
4
votes
2answers
460 views

Wine yeast for beer?

Has anyone ever used wine yeast for a batch of beer or a beer yeast for a batch of wine? I brew beer and my neighbor makes wine and we have been toying with the idea of trying to make a batch of our ...
10
votes
6answers
1k views

Does suspended yeast contribute to high SG?

I've got a SMaSH beer (Baird Maris Otter and EKG) finishing in primary. It's been fermenting for just over a week. Starting Gravity was 1.046. I mashed at 154F for 60 minutes. Fermented with WY1335 ...
2
votes
2answers
541 views

What differentiates the lag phase from fermentation?

When making a starter, the intent is to make yeast. We use stirplates in part to continually oxidize the wort, enabling the yeast to multiply. In this question about starter oxidation, one of the ...
6
votes
3answers
396 views

Does dry hopping affect attenuation?

Does the anti-microbial affects of hops affect yeast activity and therefore attenuation when dry hopping near the end of primary fermentation?
5
votes
1answer
539 views

Any need to stop yeast before kegging?

I'm brewing to keg for the first time, finally. I am planning to force carbonate and was wondering: Are there was any steps I need to take to stop any active yeast before putting it in the keg and ...
4
votes
2answers
2k views

Yeast for very high gravity (1.138) stout

I'm planning to brew a very high gravity stout. I'm expecting an OG between about 1.118 and 1.138 depending on how much my efficiency suffers. I've done this before with decent results, but I think I ...
1
vote
2answers
120 views

Attribute taste variation to volume of bottle?

This is not exactly a home brew question but this site seems to be the best fit in the stack exchange network for it. You can home brew the beer in question with a kit produced by the brewery though ...
4
votes
7answers
6k views

Is there a technique which prevents the deposit of sediment at the bottom of bottles?

Every beer I've brewed and have seen done by others has had a sediment form at the bottom of the bottles. Is there some common mistake that I and others are making which is causing this to happen? ...
3
votes
1answer
185 views

How well does liquid yeast travel?

I have often heard people talking about the viability of pitchable liquid yeast either in a vial or smack pack dropping over time. This effect is greatly accelerated with increased temperature, so ...
6
votes
4answers
1k views

Yeast , dead or alive?

G'day , how long after the fermentation has finished does the yeast live ? I am curious because not only is it the cost of the yeast but if you find a particular strain and you like the taste ( ...
5
votes
7answers
841 views

Chilling wort before pitching yeast

I know it is important to chill wort to <80 before pitching yeast, and that quality of final beer is affected by the speed with which the wort was chilled to this point, and there are various ...
11
votes
3answers
5k views

What Type and Power of Microscope For Observing Yeast Cells

I'm interested in buying a microscope that I can use to observe yeast cells. Ideally, I'd like to use this to count cells in region and do calculations to get estimated populations (though I don't ...
1
vote
1answer
189 views

When should I hydrate my dry yeast?

I'm brewing beer tonight (in roughly three hours) and I've decided to try rehydrating my dry yeast instead of throwing it directly into the cooled wort. If I boil a couple cups of water, how long does ...
3
votes
1answer
976 views

Can ale yeast be used weeks after it's opened (Safale S-04)?

Second-time brewer (to be). When I did my first kit brew, I didn't want to mess anything up, and the instructions I was following told me to avoid the yeast sachet taped to the top of the LME can and ...
3
votes
1answer
2k views

How do I know when a starter has hit 'high krausen', when using a stir plate

I've been advised to pitch an alcohol tolerant yeast "at high krausen" into a barley wine where the fermentation has slowed (OG 1.101, now 1.035). But if I've got it on a stir plate, how do I know ...
5
votes
2answers
221 views

oxygen and yeast pitching rates

Many online references, such as BYO, mention that oxygen is needed by yeast to reproduce, and that a wort with low dissolved oxygen levels will have longer lag times and less attenuation. This might ...
1
vote
1answer
181 views

Premature fermentation of wine must. What to do?

I recently took delivery of a five gallon pail of white wine juice. Supposedly, the juice had been refrigerated on its trip from California and stored in a cool warehouse here in my home town. ...
2
votes
1answer
359 views

How quickly do I let the fermentation temperature rise if it starts off too low?

I brewed something like a Black IPA today (hoppy and dark). I ferment in carboys in a chest freezer with an external temperature control. It is frigid today, and the garage where the chest freezer ...
6
votes
2answers
386 views

Is oxidation of yeast starters a concern?

We all know oxidation is bad, and cooling hot wort is particularly susceptible to this off-flavor-producing problem. the question is; does oxidation matter for starters? I use a stirplate to aerate ...
3
votes
2answers
180 views

Why re-pitch light to dark?

It is often said that, when re-pitching yeast, you should generally go from low- to high-gravity, and dark to light beers. When I repitch, I use trub directly. I understand why using a yeast from a ...
5
votes
3answers
2k views

What happens when you push a yeast near its alcohol tolerance?

I'm brewing with Wyeast's West Yorkshire Ale yeast, which has a documented alcohol tolerance of 9%. I'd like to push that boundary by brewing an 8.5% ale and wonder what to expect. Common sense says ...
3
votes
1answer
560 views

Honey/Ginger Brew With Champagne Yeast

I got it in my head last weekend that I needed to homebrew again (it's been more than 10 years!), and so I boiled 4lbs of honey, 2lbs of ginger, 1lb of dark brown sugar and 1.5lbs of raisins (since ...
2
votes
2answers
1k views

US-05 Fermentation Temperatures / Top Cropping

Brewed a 1.060 OG IPA last night (extract), pitched a packet of US-05 reconstituted with 5 ounces of water. Pitched at 68 degrees, but I wanted a clean fermentation with minimal esters, so I have the ...
1
vote
1answer
867 views

WLP 566 Saison Long Fermentation

I brewed up a saison/BGSA 13 days ago, OG of 1.088. Don't have the grain bill/fermentables handy, but there was a good bit of sugar/highly fermentable adjuncts. Pitched a 32oz starter with this ...