Yeasts are micro-organisms used in brewing to produce alcohol during the process of fermentation.

learn more… | top users | synonyms

2
votes
1answer
86 views

Is it normal for WY2112 to stall?

I've made three batches with the same colony of WY2112, and each one of them has exhibited the same odd behavior. I pitch a good quantity of yeast into oxygenated wort at 65 degrees F. Within 24 hours ...
0
votes
1answer
100 views

Yeast Ok After Being Near Freezing?

I have some California Ale Yeast WLP001 that I accidentally put in a corner of my fridge that is near freezing and it has been there for about a month. It's still in liquid form, so I think it should ...
2
votes
1answer
146 views

Off flavor of kegged Wheat beer

I brewed an AG wheat beer and used WLP351 as the yeast for this. Let it sit in the primary for near two weeks (66°F/19°C) and I did do a secondary on it for about another weak to try and decrease the ...
3
votes
2answers
298 views

Rescuing a weak lager fermentation

I'm currently fermenting a spiced dark lager with an original gravity of 1.064. I began fermentation 2 weeks ago today with a White Labs 830 yeast that I made a starter with. The yeast was a bit old, ...
1
vote
2answers
218 views

I pitched my starter when it was too hot. Is it still ok to use?

I'm making my first starter and I accidentally pitched the yeast when the wort was still warm. I've had it on the stir plate for 24 hours and then a 30 minute rest. See picture, is it still ok to use ...
1
vote
3answers
2k views

Is 2 hours cooling the wort before adding yeast too long

I forgot about the warmer tap water and found my wort was way too hot and even after adding ice and standing the fermenter in ice water it took nearly two hours before is was the right temperature so ...
2
votes
1answer
440 views

How long to ferment for?

I made a coopers IPA can 2 days ago and it's currently fermenting away (bubbles every few seconds) and is at around 21-24 deg c (69-75 deg f) which is what it says as the label. The can says to ...
2
votes
2answers
219 views

Pitching yeast the next day?

If I wake up and decide to brew an impromptu batch, can I begin a starter at the same time and just pitch the next day? Seems comparable to no-chill brewing as far as contamination concerns, though ...
1
vote
3answers
581 views

What happens if I Double Brown Ale

I'm thinking about making something like Frambozen from New Belgium from brown ale and added raspberries. However it's more of a sipping beer / higher alcohol content than the regular brown ale. ...
7
votes
3answers
1k views

What is the minimum amount of time required for a yeast starter?

It is generally advised to leave a yeast starter for at least 24 hours to get optimal yeast growth. If I only have a few hours, is there any point making a starter from my liquid yeast pack? Is ...
3
votes
2answers
364 views

Yeast harvesting

I have just read an article about harvesting yeast (http://www.homebrewtalk.com/entries/yeast-harvesting-novel-approach.html). The author talks about making a starter and taking a part of the starter ...
1
vote
3answers
926 views

US-05 Fermentation Temps

On the package of the US-05 it says it's temperature range is 58-75F. However, all the reading on forums I am finding people tend to the lower end of the spectrum, even calling upper-60's to be too ...
0
votes
2answers
273 views

Should I be disappointed?

Just started, so my question is very basic. I got Coopers Lager Kit, did everything by instructions, temperature has been stable at 22-24C but gravity doesn't go down. OG was 1.039, dropped to 1.020 ...
3
votes
1answer
377 views

How do you harvest yeast from a commercial beer?

I've done yeast starters and I've re-used yeast beds but I have never previously harvested or captured yeast from a commercial beer. I tried it last night, inventing my process as I went but I'm ...
1
vote
2answers
435 views

Kill yeast in keg

I've got a batch of cider that I've kegged. I did so at about 1.011 (OG was 1.052 IIRC). While the yeast activity will decline as the keg chills, I'd like to stop it completely so that I can bottle ...
1
vote
2answers
214 views

Slow temperature rising vs equivalent fluctuations

I've read a few accounts of brewers using slow temperature increments to bring out particular flavours from the yeast that they're using. For example, stepping up 1C or so every day over a few days. ...
2
votes
1answer
449 views

Use of servomyces in a yeast starter

1 servomyces capsule is the correct dose for 5 galons of wort. If I want to add servomyces to my 1.5 litre yeast starter should i break open the capsule and use only part of it? or is it safe to add ...
0
votes
0answers
37 views

Reusing vs using new yeast [duplicate]

Possible Duplicate: How many times can yeast be reused? I have read in a couple of places that you should only reuse yeast a couple of times - most say up to 5 times because you would get ...
3
votes
5answers
321 views

What are the possible consequences of putting dry yeast straight into the wort?

I always put my dry yeast directly into the wort, even though the packaging says to rehydrate it first. I've never had (noticed?) any problems with fermentation. What could this habit cause to go ...
3
votes
2answers
1k views

Yeast Starter with Dry Yeast (S-04)

I know the common wisdom is you shouldn't do this, but I am brewing two mid-to-high gravity beers on Saturday (1.065 and 1.072), and only have one packet. I am now chilling a 2L starter that I was ...
1
vote
3answers
670 views

Wyeast Activator Swelling Expiration time

I intended on brewing tonight so I broke the activator on my Wyeast 1450 last night. Only today did I realize I'm missing a fermenting bucket to actually ferment with (d'oh, big mistake!), so I'll ...
4
votes
3answers
590 views

Would Lalvin's 71B-1122 make a good cyser?

From Lalvin's website: ...has the ability to metabolize high amounts (20% to 40%) of malic acid. It also says that it produces "rounder, smoother..." wines. I'm thinking this would be a nice ...
4
votes
3answers
2k views

Wyeast pack arrived already inflated - keep in the fridge or not?

Like the question says, the pack arrived pre-smacked! I'm making a yeast starter before I brew so that'll tell me whether the yeast is ok, but what I need to know is whether to keep it in the fridge ...
9
votes
4answers
657 views

Harvested Yeast - What are these layers and do I have too much?

I harvested yeast a few weeks back from my hefeweizen (Wyeast 3068) which I had open fermented. To harvest, I scrapped it right off the top, after ~36 hours of fermenting, with a sanitized spoon. I ...
4
votes
2answers
345 views

Making a starter when reusing yeast

I want to reuse the washed yeast from a previous batch of beer in my next batch. Should I make a starter for it? If so, how much of it? I looked at MrMalty, and it seems to me they tell me not to make ...
0
votes
1answer
244 views

Troubleshooting a stuck fermentation with Ringwood Ale

I'm brewing an IPA using Wyeast 1187 (Ringwood Ale) and it seems stuck. I'm brewing 19L (5G) with an OG of 1.052 and pitched two (smacked) smackpacks of 1187 straight into the primary bucket. I used ...
1
vote
3answers
2k views

Can Dried yeast function at a low temperature?

I started my first batch of home brew lager around 24hrs ago I aerarted it and it was at 20 Degrees celcius but does not appear to be fermenting..... I know people say I have to give it time as I read ...
3
votes
3answers
552 views

What is the purpose of stepping up a starter

Very simply, what is the difference in pitching 100 billion cells into a 1L starter and into a 2, 3, 4L starter of, say 1.040 OG? I understand the logic with a 5.5 gallon batch of beer: you want ...
14
votes
1answer
367 views

Always making a starter vs. following package description

I have noticed that the smackpacks say on the package that the package is meant for a 5 gal. batch and that you should pour the pack directly into the wort. On the otherhand - nearly everyone tells ...
1
vote
1answer
379 views

Are cheap poratable USB microscopes good enough to count yeast, and check vitality?

I have read that a 400x magnification is right for counting yeast on a hemocytometer, and also using dye to check vitality. I'm looking at using a cheap portable $50 USB microscope. They are rated ...
5
votes
2answers
395 views

Yeast, CO2 Toxicity with mead and beer

Degassing CO2 during early fermentation is important for wine and mead. But why not for beer? I'm getting back into mead making and see plenty of references to degassing the must during early ...
2
votes
2answers
423 views

Top Cropping Cell Counts

TLDR: I have no idea how much top-cropped yeast to pitch into a ~1.055 OG Octoberfest (5.5 gallons) I am planning on making an Octoberfest (late I know) on August 18th. Instead of making a boring ...
3
votes
1answer
444 views

Using a low alcohol tolerance yeast in potentially high alcohol must

i have posted this question on other forums but haven't really gotten a good answer. If I am attempting to create a sweet mead and want to avoid backsweetening (lots of additional tweaking) or ...
3
votes
1answer
636 views

How much yeast nutrient does starter wort need?

I am going to make a batch of wort to be stored in 1 quart jars to make starters from. I'd like to add the yeast nutrient (diammonium phosphate and yeast hulls) at this time so I don't have to mix it ...
5
votes
2answers
215 views

Possible to intensify/increase the amount of yeast flavor?

I will soon be making a hefe and will be using wyeast's 3068. In recent hefes I have made, I have always desired much more intensity in the flavors provided by the yeast strain. The only method i am ...
6
votes
2answers
534 views

Measuring yeast in a slurry

Please tell me if I'm being overly simplistic here. I was reading the book yeast by Chris White and Jamil Zainasheff. In the book, they talk about measuring how many cells are in a slurry by using a ...
5
votes
1answer
636 views

What flavors come from fermenting S-04 on the warm side?

I brewed this 1064 OG recipe and used my reverse flow chiller to get it down to 74F (could have gone cooler, but my starter was at 76F or so). It fermented like nuts (over 1.5 gallons of krausen ...
4
votes
3answers
3k views

Alternative/homemade yeast nutrient?

I forgot to add nutrient to my must when I put it in my carboy the other day (first time brewing mead). I fear I won't be able to get to my homebrew store before it's too late, so I'm wondering if I ...
1
vote
4answers
3k views

Measuring yeast activity by collecting CO2

I've been thinking about ways to measure the progress of the primary fermentation, looking for an alternative to taking samples and measuring the gravity. I was wondering if anyone has tried to ...
1
vote
1answer
247 views

My yeast isn't floating at the top of my mead

I just made my first ever batch of mead. I used a stronger yeast (a wine yeast) and the package said to let it sit for about 15 minutes in 50ml of warm water. I did that and added the water and yeast ...
4
votes
2answers
804 views

How much yeast do i need for 1bbl batches?

We are planning on brewing 1bbl batches, but we are kind of stuck on how much yeast we need. We contacted White Labs but their 1bbl pitchable yeast is way too expensive. I want to know what would be ...
6
votes
2answers
722 views

Storing Yeast Slurry

If I take a yeast slurry from a batch of beer, wash it and store it in a sanitized container - how long can I leave this yeast slurry in the fridge before repitching? I'm thinking of leaving it in the ...
5
votes
3answers
2k views

Ideal fermentation temperature

I'm just finishing up a DIY fermentation chamber made from a chest freezer, reptile tank heater, and a temperature controller. Now I just need to figure out what temperature to set! Most yeast ...
3
votes
1answer
331 views

I moved a Kolsch to secondary after 4 days. Should I repitch yeast?

This is my first batch ever, a Kolsch from a kit. It fermented like crazy the first 2 days, but after 4 had stopped bubbling, so I moved it to a secondary container. As I was transferring, I noticed a ...
5
votes
3answers
2k views

How can I restart fermentation on a stuck strong dark belgian ale?

What can we do to restart fermentation that got stuck over the winter? Our club brewed about 7 gallons of this recipe in November. Primary went well, but then the weather got cold and the yeast went ...
4
votes
3answers
2k views

Do yeast die after bottling?

Do yeast die after bottling? My second batch of beer have been stored in bottles over a month now without producing any co2. I want to add some priming sugar to start the fermentation again, but I'm ...
5
votes
1answer
181 views

Flanders Red from Brewing Classic Styles

I am interested in brewing the Flanders red that is found in Brewing Classic Styles. Jamil mentions using the Wyeast 3763 or WLP655 and leaving it sit for a year until the pellicle forms then falls ...
4
votes
2answers
395 views

Wine yeast for beer?

Has anyone ever used wine yeast for a batch of beer or a beer yeast for a batch of wine? I brew beer and my neighbor makes wine and we have been toying with the idea of trying to make a batch of our ...
9
votes
6answers
981 views

Does suspended yeast contribute to high SG?

I've got a SMaSH beer (Baird Maris Otter and EKG) finishing in primary. It's been fermenting for just over a week. Starting Gravity was 1.046. I mashed at 154F for 60 minutes. Fermented with WY1335 ...
2
votes
2answers
490 views

What differentiates the lag phase from fermentation?

When making a starter, the intent is to make yeast. We use stirplates in part to continually oxidize the wort, enabling the yeast to multiply. In this question about starter oxidation, one of the ...