Yeasts are micro-organisms used in brewing to produce alcohol during the process of fermentation.

learn more… | top users | synonyms

2
votes
1answer
175 views

Yeast starter left out of refrigerator, is it OK?

I created a yeast starter from some yeast from my primary fermenter and some DME following standard steps and the fermentation looked great. However, I went on vacation and forgot to put my yeast ...
1
vote
2answers
806 views

Lager yeast fermenting at 25-30C

The summer is approaching, and I would like to make some experiments using lager yeast, just completely out of its temperature range. I guess that steam bear was made using lager yeast at higher ...
1
vote
1answer
64 views

“Quiescence Yeast” Or will my yeast-to-be survive a travel to the caribbean?

This is a related question, but not a usefull one to me :( I intend to buy liquid yeast from northenbrewer (WLP099 in case you wonder) and I currently live in Venezuela, a very hot and sunny place ...
4
votes
3answers
2k views

Wyeast pack arrived already inflated - keep in the fridge or not?

Like the question says, the pack arrived pre-smacked! I'm making a yeast starter before I brew so that'll tell me whether the yeast is ok, but what I need to know is whether to keep it in the fridge ...
0
votes
2answers
849 views

What to expect from champagne yeast?

I bought a pack of champagne yeast, but not sure why, just to try it :) What differences should I expect compared to a "normal" English ale yest?
0
votes
2answers
432 views

What volume of brewer's yeast to use for yeast-nutrient-less dandelion wine?

I'm trying my first, 1-gallon batch of dandelion wine. Some recipes say "1 packet" of brewer's yeast, and mine doesn't even specify an amount. It also specifies to add "yeast nutrient," which my ...
2
votes
1answer
184 views

Dropped the temperature as it was getting out of control, did I shock my yeast?

Making an IPA with an OG of 1.069, we pitched at 70°F with good ol' Safale US-05, just dry out of the packet as I've always done with US-05 with good success (I tend to trust it a little too much ...
0
votes
1answer
547 views

Problems with Wyeast London Ale 1028?

I had a brew day yesterday and ran into something a little odd. I smacked a pack of Wyeast London Ale #1028 berfore I started my routine. After everything was said and done with the boil it had been ...
4
votes
5answers
4k views

Is there a technique which prevents the deposit of sediment at the bottom of bottles?

Every beer I've brewed and have seen done by others has had a sediment form at the bottom of the bottles. Is there some common mistake that I and others are making which is causing this to happen? ...
2
votes
4answers
199 views

yeast cell count importance

I have a had a question for quite some time that nobody has been able to answer. The question is more academic or theoretical than it is practical. Perhaps the community here is a tad smarter ...
3
votes
2answers
516 views

Wyeast 2124 Bohemian Lager for Bock - too late for diacetyl rest?

I really wasn't ready to do a lager, but I wanted to do a Bock, so I requested California Lager yeast. My supplier failed to make the substitution and sent me home with Wyeast 2124 Bohemian Lager. I ...
3
votes
2answers
673 views

Why is my attenuation so low?

Here's the recipe: > Recipe Specifications > -------------------------- > Boil Size: 7.37 gal Post Boil Volume: 6.38 gal Batch Size (fermenter): 5.50 gal Bottling Volume: 5.50 gal > ...
2
votes
2answers
586 views

Yeast pitching and wort cooling

I'm making an American Brown Ale and added liquid yeast to the wort that may have been too hot. The yeast was in the fridge and out to cool for 45 minutes. My guess is: Wort temp: 26-27C or about 80F ...
7
votes
2answers
1k views

Yeast nutrient schedule for meads?

Somewhere I remember a mention that a "more-modern" technique in brewing meads involves a regular schedule of adding yeast nutrients while in the primary. I was never able to find the reference again ...
3
votes
1answer
220 views

Making a starter without DME?

Planning to start to use liquid yeasts and will need to do some starters. It is hard to get hold of DME over here (I can get some hopped LME, though). I was thinking on doing a starter from grains, ...
7
votes
1answer
257 views

Does using a fining agent effect the flocculation of yeast?

I'm doing a series of smash beers all using the same yeast same temp same grain. I'm noticing a big variation in flocculation on the current batch (forgot the Irish moss oops) WLP001 by the way. Im ...
1
vote
1answer
215 views

Yeast Starter Stopped after ~20 hours

I am trying to make skeeter pee without the slurry from a previous batch. so I wanted to make a starter to make sure my yeast were happy guys. I took 3 pints of water to 1 teaspoon of yeast nutrients ...
1
vote
1answer
393 views

Make root beer without a refrigerator

All the recipes for root beer end with, bottle up your root beer in a plastic bottles. Put it away and monitor the bottles when they become hard they are ready, 2-3 days. Put them in your fridge to ...
3
votes
1answer
273 views

How long to keep in blowoff tube?

Today I learned what happens if there's too much yeast and a container too small (I have a 1 gallon batch). So according to instructions I sanitized a hose and connected the hole in the fermentor and ...
5
votes
3answers
5k views

How much distillers yeast do I use in a 5 gallon batch of beer?

The recipe I'm working on calls for the use of distillers yeast half way through my primary fermentation (among other things like plenty of sugar, aeration, etc...). Problem is, it doesn't really ...
7
votes
5answers
854 views

Is a yeast starter required when brewing a lager?

Is using a yeast starter 100% essential when brewing a lager or can you use a few liquid vials?
21
votes
4answers
649 views

Open-Fermented or Native Yeast Beers

I've always been very careful about control and sanitation with beer. But with my wine I do some native yeast Pinots, and some friends of mine are into the same with beers- they like funky, ...
3
votes
2answers
292 views

Rescuing a weak lager fermentation

I'm currently fermenting a spiced dark lager with an original gravity of 1.064. I began fermentation 2 weeks ago today with a White Labs 830 yeast that I made a starter with. The yeast was a bit old, ...
5
votes
2answers
664 views

Will Jalapeno or Habanero peppers adversely effect yeast

I have a recipe in front of me for a Saison of the spicy variety. It calls for the addition of one Jalapeno pepper, seeds included. First off, I do enjoy a fair amount of spice (far more than anyone ...
2
votes
1answer
145 views

Off flavor of kegged Wheat beer

I brewed an AG wheat beer and used WLP351 as the yeast for this. Let it sit in the primary for near two weeks (66°F/19°C) and I did do a secondary on it for about another weak to try and decrease the ...
2
votes
1answer
86 views

Is it normal for WY2112 to stall?

I've made three batches with the same colony of WY2112, and each one of them has exhibited the same odd behavior. I pitch a good quantity of yeast into oxygenated wort at 65 degrees F. Within 24 hours ...
1
vote
2answers
208 views

I pitched my starter when it was too hot. Is it still ok to use?

I'm making my first starter and I accidentally pitched the yeast when the wort was still warm. I've had it on the stir plate for 24 hours and then a 30 minute rest. See picture, is it still ok to use ...
0
votes
1answer
100 views

Yeast Ok After Being Near Freezing?

I have some California Ale Yeast WLP001 that I accidentally put in a corner of my fridge that is near freezing and it has been there for about a month. It's still in liquid form, so I think it should ...
1
vote
4answers
3k views

Measuring yeast activity by collecting CO2

I've been thinking about ways to measure the progress of the primary fermentation, looking for an alternative to taking samples and measuring the gravity. I was wondering if anyone has tried to ...
19
votes
9answers
8k views

Brewing Solid Things: Can Leftover Yeast Be Used for Bread?

I find myself baking a couple loaves of bread just about every weekend. Has anyone tried reusing their yeast from brewing for baking bread? I've heard that using some of the spent grain in bread ...
1
vote
3answers
2k views

Is 2 hours cooling the wort before adding yeast too long

I forgot about the warmer tap water and found my wort was way too hot and even after adding ice and standing the fermenter in ice water it took nearly two hours before is was the right temperature so ...
2
votes
1answer
430 views

How long to ferment for?

I made a coopers IPA can 2 days ago and it's currently fermenting away (bubbles every few seconds) and is at around 21-24 deg c (69-75 deg f) which is what it says as the label. The can says to ...
2
votes
2answers
213 views

Pitching yeast the next day?

If I wake up and decide to brew an impromptu batch, can I begin a starter at the same time and just pitch the next day? Seems comparable to no-chill brewing as far as contamination concerns, though ...
4
votes
3answers
566 views

Would Lalvin's 71B-1122 make a good cyser?

From Lalvin's website: ...has the ability to metabolize high amounts (20% to 40%) of malic acid. It also says that it produces "rounder, smoother..." wines. I'm thinking this would be a nice ...
7
votes
3answers
1k views

What is the minimum amount of time required for a yeast starter?

It is generally advised to leave a yeast starter for at least 24 hours to get optimal yeast growth. If I only have a few hours, is there any point making a starter from my liquid yeast pack? Is ...
3
votes
2answers
353 views

Yeast harvesting

I have just read an article about harvesting yeast (http://www.homebrewtalk.com/entries/yeast-harvesting-novel-approach.html). The author talks about making a starter and taking a part of the starter ...
1
vote
3answers
891 views

US-05 Fermentation Temps

On the package of the US-05 it says it's temperature range is 58-75F. However, all the reading on forums I am finding people tend to the lower end of the spectrum, even calling upper-60's to be too ...
0
votes
2answers
271 views

Should I be disappointed?

Just started, so my question is very basic. I got Coopers Lager Kit, did everything by instructions, temperature has been stable at 22-24C but gravity doesn't go down. OG was 1.039, dropped to 1.020 ...
1
vote
2answers
424 views

Kill yeast in keg

I've got a batch of cider that I've kegged. I did so at about 1.011 (OG was 1.052 IIRC). While the yeast activity will decline as the keg chills, I'd like to stop it completely so that I can bottle ...
13
votes
5answers
4k views

How do I culture yeast from a commercial beer? Is it legal?

If I like the flavor profile of a yeast in a commercial beer, how would I go about culturing it? I have some very basic lab equipment, but I can buy anything that's reasonably priced. Also, would it ...
10
votes
4answers
1k views

Should you rehydrate dry yeast?

I've read conflicting opinions on whether or not to re-hydrate dried yeast. I've had successful fermentation with dried yeast in the past but have not tried re-hydrating. Has anyone had better/worse ...
7
votes
2answers
1k views

Do commercial breweries stir in their fermenters to expose more yeast to the wort?

I noticed that ale yeasts, so called top-fermenting yeast, floats to the top. Does this mean that the yeast only works on the wort near the top of the fermenter? Assuming that no oxygen or bacteria ...
3
votes
1answer
371 views

How do you harvest yeast from a commercial beer?

I've done yeast starters and I've re-used yeast beds but I have never previously harvested or captured yeast from a commercial beer. I tried it last night, inventing my process as I went but I'm ...
1
vote
2answers
210 views

Slow temperature rising vs equivalent fluctuations

I've read a few accounts of brewers using slow temperature increments to bring out particular flavours from the yeast that they're using. For example, stepping up 1C or so every day over a few days. ...
2
votes
1answer
429 views

Use of servomyces in a yeast starter

1 servomyces capsule is the correct dose for 5 galons of wort. If I want to add servomyces to my 1.5 litre yeast starter should i break open the capsule and use only part of it? or is it safe to add ...
0
votes
0answers
37 views

Reusing vs using new yeast [duplicate]

Possible Duplicate: How many times can yeast be reused? I have read in a couple of places that you should only reuse yeast a couple of times - most say up to 5 times because you would get ...
3
votes
5answers
318 views

What are the possible consequences of putting dry yeast straight into the wort?

I always put my dry yeast directly into the wort, even though the packaging says to rehydrate it first. I've never had (noticed?) any problems with fermentation. What could this habit cause to go ...
2
votes
2answers
1k views

Yeast Starter with Dry Yeast (S-04)

I know the common wisdom is you shouldn't do this, but I am brewing two mid-to-high gravity beers on Saturday (1.065 and 1.072), and only have one packet. I am now chilling a 2L starter that I was ...
5
votes
2answers
387 views

Yeast, CO2 Toxicity with mead and beer

Degassing CO2 during early fermentation is important for wine and mead. But why not for beer? I'm getting back into mead making and see plenty of references to degassing the must during early ...
1
vote
3answers
627 views

Wyeast Activator Swelling Expiration time

I intended on brewing tonight so I broke the activator on my Wyeast 1450 last night. Only today did I realize I'm missing a fermenting bucket to actually ferment with (d'oh, big mistake!), so I'll ...