I recently found a good deal online for food-grade beverage lines. I guess I only paid attention to the inner diameter measurements (3/16") to make sure it would fit with my existing barbed nipples ...
I've been cleaning my carboys with oxy-clean and it works wonders... no need to even brush (which is important if you're using the plastic 'Better Bottles'). So I decided to throw all my vinyl tubes ...
Every time I brew I think to myself, "damn there has to be a better way to store all this tubing"! Currently I have a drawer (twice the size of a file cabinet) where I throw my racking canes, tubing, ...
Brewing 5 gallon batches at home. During the transfer from my primary fermenter to the secondary, and when filling bottles from my bottling bucket I constantly need to use plastic tubing to transfer ...
I'm building a spunding valve and can't locate an adapter from female flare to male pipe thread. Until I can, I'm planning on using reinforced PVC tubing to connect the valve/gauge assembly to the gas ...
I've just finished bottling my first homebrew; how it tastes in two weeks will be the ultimate arbiter of my success, but I feel like I made very few mistakes for a n00b and I don't think any of them ...
We're making some big upgrades to our homebrew system and one of them involves moving everything to 1/2" fittings and barbs. This means we need 1/2" tubing that will easily and reliably fit on the ...
I recently purchased a new auto syphon that came with a length of tubing. The way it had been packaged resulted in the tubing being folded and this is causing problems as it has a tendency to kink at ...
I recently upgraded from relying on gravity to a pump to transfer wort. After the first use (an IPA), the thermoplastic tubing that I used has a distinctive smell that I attribute to the hot hop ...