The practice of removing the majority of microorganisms from equipment, utentils, fermentors, bottles etc. that comes into contact with the cooled wort. Poor sanitation can contaminate the wort, producing off-flavors.
3
votes
2answers
162 views
Rust in a plastic fermenter?
I've got a 6 gallon plastic fermenter - one of those food-grade plastic buckets Midwest gives you in the starter kit. I guess after our last brew, my brother and I carelessly tossed the remains of our ...
2
votes
2answers
874 views
Boiling water and plastic equipment
I've been boiling my water prior to brewing (extract), and pouring this whilst still hot into my plastic barrel figuring the boiling water will make sure anything that survived the sanitisation is ...
2
votes
4answers
1k views
How can I clean an old carboy?
I received a 5 gallon carboy that I want to use but it has some crud in the curve of the bottle. What's the best way to clean this off?
2
votes
2answers
418 views
Is there a problem if one forgets to sanitize caps?
I bottle about a third of my batches in longnecks with crown caps. On my most recent brew (that's carbing up now) I forgot to sanitize the caps. Didn't realize this until I had bottled everything ...
2
votes
3answers
404 views
Deep cleaning equipment after “brett” contamination
A Few Contaminated Batches
Although most of my beers have been coming out 'clean', I've had a couple of my beers show up with what I think might be bretanomyaces or some other 'bug'. The ...
2
votes
3answers
247 views
Cleaning & sanitizing NPT and weldless fittings
I just got a new boil kettle with a stainless ball valve attached with a weldless bulkhead fitting, and a stainless barb connected to the NPT outlet of the ball valve.
What's the cleaning procedure ...
2
votes
1answer
99 views
Is Videne effective as a non-rinse santizer?
In nearly all the online videos from experienced homebrewers, they use Star San as a non-rinse sanitizer. However in the UK it is not widely available (only one site has it online and it is not ...
2
votes
1answer
54 views
Bottle drying after sanitisation?
When sanitising and using a bottle tree, should I wait for bottles to dry completely or can I use them just rinsed? The Youngs sanitiser I'm using says items should be used within 1 hour of being ...
2
votes
3answers
227 views
How can I tell there is mold in my bottles?
I just got my kit and am about to brew for the first time.
I was warned to not use bottles that have sat out uncleaned because there can be mold in them.
How can I tell if there is mold in my ...
2
votes
2answers
309 views
off flavors and sanitizing/scratched plastic
I've read through the various posts here and the common wisdom is that off flavors are because of poor sanitizing or using scratched plastic carboys/buckets. I'd like to read from some of the "master ...
1
vote
2answers
88 views
Which is the superior air-lock liquid: Vodka or Star-San?
I've had a life-long fancy for using vodka to clean sanitize and naturally use it in my air-lock.
Given that it is only 40%, however, and I live in California where pure grain alcohol is illegal, ...
1
vote
2answers
61 views
sanitation during mash and sparge
I've been brewing extract batches for a couple of months, and have never lost a batch to poor sanitation. I lost my first all grain batch of beer, and I think that I am sanitizing my brew kettle and ...
1
vote
2answers
122 views
What are some effective, cheap, easy ways to clean and re-use bottles?
After a couple year hiatus from home brewing, I'm ready to get back into it and I have been diligently consuming some local microbrews and saving the bottles in preparation. When I brewed before, for ...
1
vote
1answer
423 views
Is iodophor ideal for rinse-less sanitization before bottling?
I was talking to a friend today and complainIng about the clean/bleach/sanitize/rinse process I undergo when bottling. He dug a bottle of iodophor out of a back shelf and asked me to try it out. He ...
1
vote
1answer
79 views
Contact time for sanitizing bottles with diversol
To sanitize bottles with diversol can I simply put the solution in a vinator, pump it into the bottle a couple of times and rinse?
Or does it require to soak in the bottles for 20 minutes?
1
vote
1answer
200 views
Does anybody know about Chemipro Acid?
I'm living in the Netherlands and it seems that Starsan isn't available here. I'm wondering if anyone knows if Chemipro Acid is the same thing? Or just what's in it?
For reference, see here:
...
1
vote
2answers
113 views
Contact time required for sanitation with sodium metabisulphite?
My starter brewing kit came with 100g of Sodium Metabisulphite for sanitation. It advises to dissolve 1 tsp per pint of water. However there are no futher instructions.
I don't know how long I need ...
0
votes
2answers
196 views
Tips on Using Easy Clean
I got a beer kit and it came with Easy Clean from LD Carlson. At first I was under the impression that I could use it to clean and sanitize. But now I'm not so sure. It looks like it was good for ...
0
votes
3answers
278 views
harmful mold growing in fermentation freezer?
I have a freezer that I use for temp control. However, it's been unplugged all summer and its growing mold. Is this going to be harmful to my respiratory system for me to open and clean it? What ...
0
votes
3answers
262 views
How to sanitize a 10" cylindrical beer filter?
Do you soak it in sanitizer? Boil it? Do nothing?
I saw one on Amazon last week for like $30 and I figured what the heck, pick it up and I'll try it out, but now I'm not sure how I'd go about doing ...
