Initial gravity of wort (prior to fermentation).

learn more… | top users | synonyms (1)

2
votes
1answer
42 views

Question regarding which volume to use for OG calculation

My question is regarding which volume to use when calculating OG, and more importantly why. How to calculate the gravity points for a recipe is fine, but then according to BeerSmith at least, you ...
2
votes
3answers
77 views

Pilsner extract kit: why is the original gravity low?

I've just put the extract version of this in the fermenter: http://www.wagonbrewing.co.nz/panhead-port-road-clone?search=pilsner The gravity is 1.037 which seems way low. Dammit I don't want no weak ...
0
votes
1answer
28 views

Proper target for dilution

I made a recipe that was supposed to have OG 1.062, FG 1.012 (ABV ~6.5%). I forgot to note the target volume in the recipe (just the pre-boil volume), and wound up with a wort with OG 1.077. I chose ...
3
votes
1answer
42 views

Is delayed yeast activity normal?

I am working on a small batch, 1 gallon of Pale Ale. It came in a kit and the yeast was not labeled so I am not sure what kind it is. This is only the third batch I have brewed. On my first two ...
4
votes
2answers
13k views

What to do when gravity comes out too low?

We brewed a maibock (from an extract kit) and when we checked our OG it was significantly lower than it should have been. I mean like, really, really low. We decided to attribute this to the wort not ...
1
vote
1answer
97 views

Cider original gravity is 1.11. Why is it so high?

Bought a Mangrove Jack's brewing kit and some strawberry and pear cider. The cider I bought is supposed to be 4.7% but after following the instructions exactly and checking that the hydrometer was ...
1
vote
1answer
100 views

Adding water just after fermentation has started, wait, or not worth it?

I brewed this recipe last night: http://beerrecipes.org/showrecipe.php?recipeid=1254#sthash.U5JgSM6X.GnSCunwe.dpbs I don't think we added enough water and it looks like the OG is around 1.1 although ...
1
vote
1answer
89 views

What is the approximate batch size/OG limit for US-05 11g packet? Have I used enough?

I've started a brew with an OG of 1.065 in a 23L batch. I pitched a rehydrated 11g pack of US-05 and after 5 days I took a FG reading when I observed no bubbles after some time; it came out at 1.028 - ...
1
vote
4answers
70 views

Can I decrease Original Gravity of the beer during fermentation process?

I am trying to brew 5 gal of Dunkelweizen. I used instructions from: Dunkelweizen I measured the OG of 1080 after cool down the wort. It should be 1050-1053. What should I do in order to decrease ...
0
votes
3answers
168 views

Can FG be higher than OG?

I "brewed" a beer that was described as "Chinese Rice Wine", but it is 50% grain so I will call it a beer! Recipe: 18 liter batch; 2.5 kg boiled Rice, 2 kg sugar, a cup or so of raisins and one ...
0
votes
3answers
153 views

What's wrong with my gravity?

I recently brewed an Imperial Red. It clocked in at around 1.072 on original gravity reading. My malt bill looked something like this: 12 lbs 5.0 oz Pale Malt (2 Row) US (2.0 SRM) 11 lbs Marris ...
3
votes
1answer
62 views

Why is IBU/GU a good measure?

Since the FG is what measures the residual sugar in the final beer, why do we use OG, instead of FG, to calculate the ratio of the bitterness over the sweetness in final beer? How precisely is the ...
2
votes
1answer
191 views

How low an original gravity is too low?

I just brewed this extract IPA. I had 4.6 gal in the fermentor when I measured original gravity at 1.053 (@80 degrees), on the low end of the target range for 5 gallons (target 1.059, or 1.053-1.062)....
11
votes
4answers
12k views

Didn't hit gravity--how to calculate how much malt extract to add to the fermenter?

Lets say you were aiming for 1.047 but only hit 1.032. In a 5 gallon batch, how much malt extract would you need to add to the fermenter to bring it up to the desired gravity?
4
votes
4answers
2k views

Lots of trub affecting specific gravity readings?

I'm in the process of making a pretty big pumpkin beer, and just transferred to secondary. There was an incredible amount of trub -- probably 1.5 gallons out of a 5 gallon batch. I guess it was a ...
0
votes
1answer
159 views

Improvements for Geordie Winter Warmer

I've just started a single can Geordie Winter Warmer kit and having read some negative reviews about this kit turning out "weak" and "watery" and like "beer flavoured soda water" I'm naturally having ...
1
vote
3answers
87 views

Looking for process improvement suggestions

I just did my 4th brew, my OG was lower than expected, and I'm looking for help with process improvements. I'm doing an all grain process. I have an 8gal kettle, a 2gal kettle, and a 0.5gal kettle. ...
1
vote
2answers
102 views

Specific and generic questions from a first timer - size of fermenter, flavoring, gravity, sanitation

I just brewed my first ever German Weizen (using True Brew kit) on Saturday (today is Monday) and it's sitting in a plastic 6 gallon bucket (but there's only 5 gallons of it). I have some questions ...
2
votes
3answers
2k views

How to add DME to the wort

I typically use LME for my wort, with no prblems, but this time I am trying a slightly bigger beer and want to add DME to boost the OG. The one time I tried adding DME to my wort, I just dumped it ...
0
votes
3answers
585 views

Trouble Reaching My OG (Pre-Boil Was OK)

Last week I brewed an Arrogant Bastard clone. My pre-boil gravity was off by .001 so I was pretty happy with that... But my OG (post-boil) was off by .009! I thought that because my pre-boil gravity ...
1
vote
2answers
111 views

Is my SG too low? [closed]

I have an SG of 1,040, and the target OG is about 1.065. I was wondering if this is too low? Should I add more water?
5
votes
2answers
12k views

How to calculate alcohol without OG reading?

I tested 'brewing' a cider for the first time a few weeks ago. Since this process was so extremely different from what I am used to with brewing beers I completely forgot to take an OG reading. To be ...
0
votes
0answers
18 views

Missed Expected OG, Sparging Issue? [duplicate]

I brewed my first all grain batch this past weekend and everything went pretty smooth except my OG was 1.050 instead of the 1.056 I was expecting. Would this be a sparging issue? I had calculated a ...
0
votes
1answer
2k views

Is it possible to calculate ABV% without Original Gravity? [duplicate]

Seems that when I was brewing my batch I forgot to take a gravity reading. Is there any other way to calculate ABV% without this measure? Thanks in advance
4
votes
1answer
183 views

How can I prime by taking the gravity of the priming fluid?

I have this great mulberry syrup I found. I want to prime with it, and I forget how to figure this out with an unknown sugar source. I see that John Palmer's "How to Brew" references measuring the ...
4
votes
2answers
241 views

Didn't get the expected O.G

I brewed a nano batch of single grain IPA and I don't know what I have done wrong. Before I started, I calculated the O.G. and F.G. as shown in the picture bellow. After boiling the wort from 5.3 ...
3
votes
3answers
876 views

How does a yeast starter affect original gravity reading?

I've prepared a 1qt (~1L) yeast starter according to instructions from Wyeast.com. I didn't measure its gravity, but in theory it should be about 1.040. I am brewing a 5 gallon batch of high gravity ...
18
votes
3answers
5k views

How Does a Hydrometer Work?

I know how to use my hydrometer, and I know what numbers to look at and write down on my brewing sheets, but I'm not sure what those numbers actually represent, or even what units I should use to ...
0
votes
1answer
215 views

Liquid yeast, do need to make a starter?

I'm making mini batches with IPAs(4-5 liters/ca 1,5 gallon), and with my three first brews I've used dry yeast. On my next mini batch I'll use liquid yeast(WLP005), do I need to make a starter or is ...
5
votes
2answers
4k views

Why would OG be significantly higher than predicted?

I know there are several questions on the forum about OG being lower than predicted. Please bear with me though. I'm at a loss. I just brewed a straightforward extract wheat beer recipe. The ...
2
votes
1answer
6k views

What happens when mash temperature is too low?

So yesterday we brew our second beer. As expected, some errors occured during the process, which is alright, we're learning! :) So the main problem is that we were only able to keep the mash ...
0
votes
1answer
361 views

What is a 1.070 OG Yeast Starter Going to Do to Me?

As I was boiling my yeast starter, I measured it in a hydrometer, and it read 1.040. I knew the temperature would distort it upwards, but I didn't know by how much... I've already pitched, and out of ...
1
vote
2answers
797 views

High OG content for yeast

I had a higher than expected OG in my homebrew. It was estimated to come out to 1.060 but instead ended up at 1.076. The back of the yeast I used said that it is good in a brew of up to 1.060 OG. The ...
5
votes
1answer
267 views

How might trub effect taking original gravity?

For the beer that I brewed this past weekend, I finally remembered to take an Original Gravity reading. Unlike my previous last three attempts, I actually had a little more than my target 1 gallon, ...
1
vote
2answers
851 views

SG and OG quite different to values indicated on can label

very quick question: making a kit brew (Coopers Real Ale), which says a typical OG is 1.046 and FG is 1.006. Unfortunately, my OG was 1.038, and my current reading (after about 17 days) is 1.013, and ...
2
votes
2answers
252 views

should I/how do I account for temperature differences for gravity readings?

I've taken my OG at the start, and another reading last night. Only last night did I register that my OG seemed slightly low according to what the brew can suggested as typical. My OG was 1.037 (can ...
3
votes
1answer
424 views

Convert US to metric gravity points

How can I convert US gravity points? If, for example, a pound per gallon of sugar gives 46 gravity points (1.046 OG), how can I calcualate the corresponding value when 1kg of sugar is added to 10l of ...
3
votes
1answer
5k views

How can I fix low starting gravity?

I made my third all-grain batch last weekend. I have had issues getting decent efficiency so I added a couple extra pounds of ESB malted barley (11lbs, instead of 9, and about 3lbs of specialty grain)....
3
votes
3answers
200 views

Different OG than predicted

Just brewed a batch, and my OG reading is significantly different (1.051 as opposed to 1.070) than what Beercalculus.com predicted based on my recipe. Is there any possible reason for this that ...
2
votes
1answer
480 views

Missed my target gravity and volume by a mile

So, I know there were lots of things I could have done to repair the situation had I been prepared (lesson learned, I'll be having DME on hand from here on out), but I'm a little more interested in ...
3
votes
2answers
1k views

Ensuring an accurate gravity reading

So I've brewed between 6-10 batches of beer at home using partial boil methods but have never managed to get accurate gravity readings. The issue I have is that my readings somehow always seem to be ...
1
vote
2answers
419 views

My brew is taking far longer than the leaflet suggests

I'm brewing two Coopers kits at the moment - a Pilsner and an India Pale Ale. Both have a generic leaflet which suggests I should leave 6 days at 21 degrees for fermentation (which seems quite short) ...
2
votes
3answers
1k views

Hydrometer reading interference

When brewing an IPA about a week ago, my starting gravity reading came out to be 1.12 - significantly higher than the listed target of 1.07 on the recipe. I had suspicions of error at the time which I ...
4
votes
3answers
5k views

Why is our Original Gravity low?

When brewing from an extract kit we always seem to be low in the Original Gravity department. It's usually not a lot -- something like 1.055 instead of 1.060. What might be causing this to happen? Is ...
0
votes
3answers
208 views

Original gravity of ingredients

I would like to compute OG for some recipe. To do that I used to have a table, but I do not find it anynmore. Is there a table to calculate initial gravity of various ingredients in metric units?
3
votes
3answers
342 views

Undershot OG with extract brewing

Today I attempted an American IPA (Extract) full boil. I calculated the OG to be around 1085 using beersmith. The recipe included just over 11lbs of fermentables (9.15lbs LME, 1.10lb DME, 1lb corn ...
3
votes
2answers
331 views

Can wort layering significantly affect OG reading?

A few days ago I brewed a 5-gallon recipe with the following fermentables: 8 oz Crystal 20 8 oz Crystal 40 One 3.3 lb can Briess Munich LME 2.5 lb Light LME Beer Calculus predicts an OG of 1.046. ...
6
votes
4answers
2k views

How do you calculate how much extract to add if you don't hit your target gravity pre-boil?

Planning to do my first all-grain BIAB. If miss my target gravity after mashing, how do I figure out how much extract to add before I start the boil in order to reach that OG? I would imagine pre-...
6
votes
7answers
17k views

Why is my starting gravity low?

In the fall of 2011 I made the leap from extract/partial kits to all-grain kits. I'm enjoying AG, but my SG is continuously below the expected. I have brewed 5 AG kits and 4 have had a low SG. My ...
5
votes
1answer
428 views

Does white honey have greater effect on gravity?

A few weeks ago I made my first mead (actually a braggot). I ordered a 12 lb bucket of raw honey. To my surprise, when I opened it the honey inside was a creamy, almost foamy opaque white. It didn't ...