The process of moving beer or wine into larger storage containers and sealing them for later consumption. Generally carbonated using CO2 or beer gas (70/30 Nitrogen/CO2).

learn more… | top users | synonyms

3
votes
1answer
39 views

Leaky soda keg - has beer in it

I have a keg about 1/4 full of Black IPA (delicious) and I have been hooking up co2 when I want a pint of it, to save on co2 because there is a noticeable leak in the lid. I picked up some keg lube ...
3
votes
1answer
147 views

Corny kegs: Is there a difference between the in coupler and the out coupler?

I have black and grey couplers, one says "in" and the other says "out", but they look exactly the same to me... Does it matter if I use them indiscriminately for gas in/beer out lines?
3
votes
2answers
222 views

Kegging with no fridge

I just got my first keg and am hoping to get on without forking out for a fridge as well. I probably should've asked this before investing in the keg, but here we are. Anyway, is it possible to ...
3
votes
2answers
136 views

i want a keg cooler that is cheaper than kegerator

Looking into buying a 5 gal ball lock keg, i have the Co2 tanks, a tap, and gauges/hoses. I want to save by just purchasing something to keep it all cool. Strapped on cash at the moment but want to ...
3
votes
3answers
62 views

Can Horizontal Kegging be achieved?

I'm was wondering if a keg could be on a horizontal (or slight angle) position and still provide a constant flux? I'm just wondering this because I'm looking to buy a horizontal freezer (which I'm ...
3
votes
3answers
1k views

Kegged Beer Not Staying Carbonated

This summer I kegged a pale ale for the first time. For about the first week or so the carbonation level on the beer was great but then the beer started to get flat (still tasted good, just no ...
3
votes
1answer
119 views

Keg not carbonating.

5 gal keg ball lock. In a keezer at 35 deg. 30psi for three days then set it down to 13-14 psi for two days I have an 8ft line. Beer is dispensing great taste awesome but there is little to no ...
3
votes
2answers
304 views

Ran out of CO2 while force carbonating

I ran out of CO2 while force carbonating. I barely had enough to seal the lid and purge the air out. I plan on getting more CO2 tomorrow but I'm afraid the beer will absorb the CO2 in the corney keg ...
3
votes
2answers
244 views

Got first 2 kegs and need advice

I just bought two 15.5 gallon kegs yesterday from a local brewery that is closing its doors. They asked for $15 each so there was no way I could pass them up. They are in great condition. I would ...
3
votes
2answers
1k views

Dangers of Sanke Kegs

I recently told some other brewers how I have used a Sanke keg and they tried to convince me that they were dangerous. They had heard of the ball being shot up out of the keg when trying to clean ...
3
votes
3answers
271 views

New to Kegging - Help

Just moved to a new house and finally have room for a chest freezer so I can switch from bottling to kegging. I have a johnson digital temp controller to regulate the freezer so I can keep constant ...
3
votes
1answer
323 views

What's the difference between casking and kegging?

So this is how my last beer went: After about three weeks I threw it straight into a keg. It didn't taste great, but I figured it was still young and just needed more time to condition. A few weeks ...
3
votes
2answers
232 views

(Should) my keg floweth over?

So, I kegged my first time (straight from a 3.5wk primary vs 2wk, which I recommend). I tried a little bit of the "force carb", i.e. set to 25-30psi and agitate the keg until I didn't hear any more ...
3
votes
2answers
765 views

Letting the gas out of a keg

I'm new to this homebrewing, made a mistake and wondering the consequences of my actions. I have just completed the first week of fermentation and now have moved over to a plastic keg supplied with ...
3
votes
1answer
427 views

force carbonating a scotch heavy ale

I am brewing a scotch ale currently and haven't been able to determine how many volumes of co2 that it should have? also, what pressure should I put the beer under to carbonate to that many volumes. ...
2
votes
5answers
682 views

Fermenting, carbonating and dispensing using the same (corny) keg?

I Brew In a Bag and do no-chill, space and time are limited. I just bought some kegging equipment and while looking at the Pico Brew project I noticed that one option in using their equipment is to ...
2
votes
2answers
485 views

Bottling vs Kegging Questions

One thing that is very confusing to me right now is the difference between bottling and kegging, more specifically the carbonation difference between them. The first doubt of kegging arises when you ...
2
votes
3answers
2k views

What is causing a bad flavor after cold conditioning?

I've had something happen to a couple batches and can't figure out what's going on. What happens is a major flavor change after the first two weeks of primary, but for the worse. Normally my beers ...
2
votes
7answers
7k views

Infusing a beer with grapefruit

I was recently at a beer festival and one of the breweries (Fulton) had a delicious pale ale that had been infused with grapefruit. I asked the brewer how they did it and he told me that the night ...
2
votes
3answers
800 views

Force carbonation through beverage out line

It seems as though there are two predominant methods of kegging: "saturation over time" and "high pressure and shaking". I have also seen only two references to another method: connecting the Gas In ...
2
votes
1answer
158 views

Kegging - Is it necessary to filter yeast?

I'm planning to buy kegging equipment and keg my next batch of beer, and I ran into some yeast filters for sale that remove yeast specifically for kegging. Is this a necessary step? I know that when I ...
2
votes
3answers
247 views

How to fit kegging into a small house

We have a very tiny house. I brew in the garage and bottle there. I want to keg so bad but I am having trouble finding room for some kegs (in something to keep them cold). Anyone have some genius idea ...
2
votes
4answers
437 views

What makes a beer tap/faucet different from the water ones?

I'm planning on build a cooler-based jockey box to drink my kegged beers. And was thinking what's the different things in a beer tap/faucet? I'm having trouble to find one with reasonable price in my ...
2
votes
2answers
4k views

Premature Kegging - leave batch in keg or rack to carboy?

I kegged a batch of hefeweizen on Sunday morning and force carbonated. My all-grain recipe was a combination of several that I found online, but largely an original creation. The plan was to leave the ...
2
votes
3answers
1k views

What equipment do I need to start brewing into 5L kegs?

I have just bought a 5L kegerator system for my office & would like to start bringing my homebrew in. What do I need to get started? Can I re-use purchased 5L kegs or are there any retailers ...
2
votes
1answer
1k views

Transporting Pressurized CornyKegs

I wanted to get a batch ready for labor day, so I purchased some kegging equipment and opted to keg this beer. However, I am driving 5ish hours to a lake, where I plan to keep the keg in a ice bath ...
2
votes
4answers
6k views

How do I get CO2 flowing into keg?

I have just kegged my beer and connected the regulator to the CO2 supply. I turn it on and I get no pressure. On my regulator the needle has moved up to the top of the "buy more" zone, but on the ...
2
votes
1answer
303 views

Do I have to prime if I'm force carbonating?

Time has slipped and I have a brew that needs to be tapped on Saturday. It was in primary for 10 days, and has been in secondary for about 3 weeks now. This will be my first time kegging. If I am ...
2
votes
1answer
444 views

Why do people purge kegs before force carbonating?

What is the point in "burping" a keg right before force carbonating it? When the co2 hits the keg during carbonation it is going to provide a protective blanket to any air above it. I am confused ...
2
votes
1answer
304 views

Troubleshooting wild pours from kegerator

I recently bought an Igloo 6 ft^3 kegerator as my first venture into kegging. It worked very well the first day but has been pouring wildly ever since. The beer line is 4.5 feet of 3/16" PVC; based ...
2
votes
2answers
161 views

Why my beer is 'choking' when leaving the faucet?

While I don't have a jockey box, I'm borrowed another one again. And I'm having trouble to get a good pour. There are bubbles in the system that never ends, it never happened before to me. Always ...
2
votes
3answers
2k views

Kegging Vs Bottling in regards to Conditioning

I recently started kegging, roughly 6 batches ago. Initially I would keg two batches and place them in the refridgerator, waiting two weeks for them to carbonate "naturally" (as opposed to "forced" ...
2
votes
3answers
4k views

CO2 tank slowly losing gas, not sure where the problem lies

So I have a rather simple keezer setup: The left keg is currently being force carbonated at 30 PSI. The top keg is being kept shut off from receiving CO2. The left keg's CO2 line is using a ...
2
votes
1answer
513 views

Filtering using a keg and a carboy instead of two kegs

I've read that filtering requires two kegs. I've only got one corny keg but I'd like to filter my brew with a canister or plate filter. Do I risk overly oxidizing the beer if I were to filter from a ...
2
votes
1answer
133 views

What is the pressure limit for PVC tubing on barb?

I'm building a spunding valve and can't locate an adapter from female flare to male pipe thread. Until I can, I'm planning on using reinforced PVC tubing to connect the valve/gauge assembly to the gas ...
2
votes
2answers
2k views

Why did beer get into my gas lines from my corny keg?

I think I know the answer to this, but I'd like to see an answer listing more conclusively the different reasons why this happens. Some causes I've seen listed: High pressure plus shaking can cause ...
2
votes
2answers
837 views

a few questions about using carbonation stones

Just got a carbonation stone because I want to carbonate a keg quickly and have a few questions. Do you need any special tubing to attach the stone to the gas-in dip tube? The stone I have has a ...
2
votes
1answer
276 views

Kegging at basement temperature

I am a novice at kegging. I don't have room for a kegerator or chest freezer so I simply keg at basement temperature. My basement is currently 69 F and I've had 5 gallons of tripel on pressure for 3 ...
2
votes
2answers
16 views

Is it possible to know how many volumes of CO2 end up in a keg after force carbonating?

There are two methods used to carbonate a keg: Set and forget Force carbonation In the first method, the keg's PSI is set to a value determined by a kegging chart and is left at that PSI for the ...
2
votes
3answers
808 views

lemon flavor after kegging

So I made Jamil's California Common (minus the chocolate malt) with Wyeast Bavarian Lager yeast (2206). Fermentor samples tasted great, I had about 82% attenuation, so the 'flat' samples were nice ...
2
votes
2answers
707 views

Checking for CO2 leaks

If you have an at home draft system, how do you check for leaks in the CO2 side of the set up? How often do you need to check for leaks?
2
votes
1answer
125 views

What's the minimum size for a jockey box?

I'm planning on build one cooler based dispensing system for my kegs. My previous experience was with a box with 2 aluminium coils (~15m long) and 2 faucets. It holds a 20 Kg ice pack. And the beer ...
1
vote
2answers
214 views

How hard must I tighten the posts on the keg?

I purchased two used kegs from NB. I went to Home Depot with one of the kegs and bought the deep sockets to take the posts off. In the store I was unable to pull either the in or out posts out. I ...
1
vote
2answers
28 views

Beergas or just c02

I've recently come across there being beergas or G-Mix and co2. I had originally thought that it was just co2 and not a mixture of co2 and nitrogen. What are the issues with just using co2?
1
vote
2answers
7k views

Where are MillerCoors Light Home Draft units available?

MillerCoors used to sell Coors Light Home Draft and Miller Light Home Draft "kegs" at my local grocery store, but I have not seem them in a long time. The reason I ask is because these units are ...
1
vote
2answers
583 views

how can i carb multiple kegs at the same time?

I have 5 kegs I want to carb with a single co2 tank, I have a splitter, but I don't know if I need to apply the same amount of pressure I apply to a single keg, I carb using the 40 20 method, which is ...
1
vote
1answer
321 views

Force Carbonating and Serving Kegs Simulanteously

I'm trying to come up with the most cost effective way to have kegs both force carbonating at 20+ PSI and (other) kegs being served at 10-12 PSI. Obviously, I could buy an entirely separate regulator ...
1
vote
2answers
202 views

When is the right time for kegging?

Hi I am about to keg for 1st time and my question is this do we force carbonate right after fermentation is over?For example a lager beer style will go for laggering before or after force ...
1
vote
3answers
210 views

Converting hose size from CO2 tank

So I am almost done fermenting my first batch of home brew and am about to start kegging it. The only problem is the current hose coming from the regulator is a good bit wider than the nozzle I have ...
1
vote
1answer
234 views

Clean kegged, put back together wrong

I recently brewed my second batch of 2x 5 gallon beers. The first time, kegs were recently reconditioned and so I did a quick clean and filled them up. This time, being some time later, I went ahead ...