Tagged Questions

A (primarily metal) container for storing and serving beer.

learn more… | top users | synonyms

0
votes
2answers
55 views

Is it possible to do pressurized fermentation in a mini keg?

I have been keen on moving from bottles to use kegs in my amateur home brews. But because of lack of space and because I just like the size and mobility of the smaller kegs I'd like to try to use ...
0
votes
2answers
90 views

What is the best way to stop fermentation?

I am thinking about brewing ginger beer for a bar I work at. This means it would be in a keg on a tap. I would like to ferment the ginger beer instead of pumping in CO2 but am unsure how to go about ...
2
votes
3answers
229 views

Kegging Vs Bottling in regards to Conditioning

I recently started kegging, roughly 6 batches ago. Initially I would keg two batches and place them in the refridgerator, waiting two weeks for them to carbonate "naturally" (as opposed to "forced" ...
1
vote
2answers
82 views

How hard must I tighten the posts on the keg?

I purchased two used kegs from NB. I went to Home Depot with one of the kegs and bought the deep sockets to take the posts off. In the store I was unable to pull either the in or out posts out. I ...
1
vote
1answer
80 views

What should I expect to pay for pin lock Corny Kegs?

It seems like corny keg prices are all oer the map. doing a simple search for "used pin lock cornelius keg" I see them from $11.99 on ebay to $38.95 on Cornykeg.com That's a huge swing. Relatively ...
3
votes
2answers
298 views

How do you open a Type-S (European) Sankey keg?

I own a Type S Sankey keg. How can we open it for cleaning, sanitization, and filling? In particular, is there a tool we can purchase to make opening and re-closing safe and easy?
2
votes
2answers
154 views

What kind of connectors do I need for my keg, and where can I get them?

I have a European Sankey keg with a Type S tap, but my CO2 container only has connectors for a ball-lock valve. What connectors do I need to get the tap pictured attached to my CO2? It would help to ...
2
votes
3answers
747 views

How is the Heineken Draughtkeg made?

I am sorry for the noob question, I'm not a beer professional, but just curious about some things :) So I've seen this thing: http://heinekendraughtkeg.com/ and it looks like barrel with a CO2 tube ...
5
votes
3answers
5k views

Why am I getting foam in my keg line when dispensing?

I have a two-tap kegerator which I use to dispense commercial 5-gallon kegs. My lines are about 3 feet long1 and I keep my pressure at 10psi and my temperature relatively cold. Whenever I draw from ...
1
vote
2answers
205 views

Threaded portion of corny keg - removable?

I am trying to change over 3 pin-lock kegs to ball type. I got the posts and they include the threaded portion that normally protrudes from the top of the keg. Everything went fine for 5 out of 6 ...
7
votes
2answers
1k views

How often should a keg be disassembled and cleaned?

Right now I give my corny kegs and beer lines a hot rinse, PBW soak, rinse and Starsan in-between batches. I inspect for gunk but don't fully disassemble (posts, etc.) unless there's something ...
1
vote
3answers
197 views

I have a keg, now what?

A co-worker of mine had a roommate move out and leave his brewing stuff behind, including two 5 gallon kegs (pictured below). Co-worker ended up giving them to me for free. Obviously you need a CO2 ...
5
votes
1answer
217 views

Is cold CO2 required for proper kegerator?

I've seen most in-home kegerators have the CO2 tank and regulator inside the fridge. But I remember from my bar-working days that the CO2 tank was outside the fridge. Does this really make a ...
1
vote
1answer
1k views

Can a keg explode?

As I read in some answers to other questions they should not explode, is it true? Why is that? Is it because they have a safety valve or just because they are very strong?
4
votes
3answers
416 views

Keeping beer from entering CO2 line while Carbing Keg?

So I am getting ready to carbonate my first keg! But I am worried about beer entering the CO2 line if I use the 'rock on my lap like a baby' method :) I am worried because I tried to carbonate a ...
1
vote
3answers
242 views

Rubber Keg Boot Glue Recommendation

I just bought two reconditioned 5 gal pin lock kegs. When I filled them up with hot water to clean them out I noticed that the rubber boot at the top of one of them was completely loose - it's only ...
0
votes
1answer
268 views

Keeping pressure in secondary keg

I recently started brewing again as I was bought some new kit: 5 gallon fermenting bucket 5 gallon plastic keg with tap This is the first time I've brewed without bottling. I've just got my wort ...
1
vote
3answers
375 views

Keg Management Systems

I'm looking for a way to keep track of the state of my kegs - how many times were they washed with a caustic cleaner since the last acid cleaning, how long ago was it cleaned (and pressurized), what ...
1
vote
1answer
244 views

Does kegging require a fridge

I was planning on building myself one of these for the summer: http://www.homebrewtalk.com/f51/portable-igloo-cooler-kegerator-172047-post1990392/ I currently bottle all my beer and don't own any ...
3
votes
2answers
1k views

How can I ferment in a corny keg under constant pressure?

I'm thinking about switching from fermenting (primary and secondary) in glass carboys to using Cornelius kegs. Specifically, I'd ferment a 5.5 gallon batch in a 10 gallon carboy. My goal is to ...
4
votes
1answer
128 views

Disconnecting a keg

I have a mobile bar business and wanted to add draught beers to our menu. I am a layman with regards to this but I understand how the basic system works using a CO2 (or 70/30 CO2 & Nitrogen) and ...
1
vote
2answers
507 views

Kill yeast in keg

I've got a batch of cider that I've kegged. I did so at about 1.011 (OG was 1.052 IIRC). While the yeast activity will decline as the keg chills, I'd like to stop it completely so that I can bottle ...
2
votes
2answers
230 views

How quickly do i need to drink my beer?

I've somehow managed to brew a bloody lovely bitter (for my first time) in a pressurised keg but now i've started drinking it, is there any kind of best before? Or do I literally need to drink 10 ...
2
votes
1answer
850 views

Transporting Pressurized CornyKegs

I wanted to get a batch ready for labor day, so I purchased some kegging equipment and opted to keg this beer. However, I am driving 5ish hours to a lake, where I plan to keep the keg in a ice bath ...
1
vote
1answer
338 views

Troubleshooting new keggerator equipment - sanke tap, gas manifold, etc

I've been using a converted chest freezer for nearly a year now for storing and dispensing from corny kegs and for lagering. Depending on whether I have kegs of homebrew, I may have a sanke keg of ...
3
votes
2answers
228 views

Got first 2 kegs and need advice

I just bought two 15.5 gallon kegs yesterday from a local brewery that is closing its doors. They asked for $15 each so there was no way I could pass them up. They are in great condition. I would ...
2
votes
2answers
1k views

Is a dual-body CO2 regulator worth the additional cost?

I have a five cubic foot chest freezer converted into a kegerator. Since I set this up, I've had a standard regulator and one corny or sixth barrel sanke keg in there at a time. I'm planning to slowly ...
1
vote
1answer
924 views

How can I seal off the liquid line on a sankey keg to allow force carbonation?

I want to carbonate several sankey kegs, but the keg couplers have the liquid line open, so if I apply CO2 to them, the beer will come out if I don't have a serving line connected, I only have 2 ...
2
votes
2answers
582 views

Does keg secondary fermentation temperature matter?

I'm considering investing in a keg, fridge, etc. I live in a warm climate and currently do secondary fermentation in the bottles in the heat. I've read that people have chest freezers to store kegs. ...
1
vote
1answer
533 views

What size keg to get for 23L brews?

I'm thinking about investing in a keg, etc. done some reading but still have a lot of questions. I currently bottle from brew cans which fill the fermenter to 23L and comes out to about 30x 750ml ...
4
votes
1answer
153 views

Gas line : does it need to be sterilized?

I'm reading websites and I'm viewing videos where people show how to wash kegs, but they never wash their gas line. I was wondering if it's necessary to do so? I'm asking this because I would like to ...
4
votes
3answers
1k views

How Long Will a Keg Hold Carbonation if Disconnected from the CO2 Tank?

How long will a keg hold carbonation if it is disconnected from the CO2 tank? Does the type of keg matter?
3
votes
2answers
2k views

How to properly keep a warm kegged beer (short term)

This is a combination keg/carbonation/beer storage question. I have only fridge/freezer room for either a carboy or my (currently 1) keg. I have about half of the corny keg left of a light cream ...
3
votes
2answers
189 views

(Should) my keg floweth over?

So, I kegged my first time (straight from a 3.5wk primary vs 2wk, which I recommend). I tried a little bit of the "force carb", i.e. set to 25-30psi and agitate the keg until I didn't hear any more ...
3
votes
2answers
1k views

Dangers of Sanke Kegs

I recently told some other brewers how I have used a Sanke keg and they tried to convince me that they were dangerous. They had heard of the ball being shot up out of the keg when trying to clean ...
5
votes
2answers
575 views

Keg/CO2 question as I think about moving to kegging

This is probably a foolish one, but... So you can force carbonate with a keg (or sugar carbonate, but of course why would you), and then serve from the keg with the CO2 to help dispense. But, if ...
3
votes
1answer
189 views

what can I do with an old corny keg?

I have a corny keg with a neck that doesnt seal what else can i do with it besides carb. and serve beer? above the seal it is all bent up and have tied to repair with no success.
6
votes
1answer
222 views

Emptying bottles into a keg

I have about 3 gallons worth of IPA that are sitting in bottles. I just got a new 5 gallon keg and I really want to use it. Would it be a good idea to empty my bottles into the keg or is this ...
5
votes
3answers
6k views

How do I reduce the amount of head when dispensing from a keg?

I just got a couple of used kegs from a former brew club member, he had to move away and sell all his brewing supplies :-( The good news was that I picked up two kegs, a CO2 tank and all the required ...
11
votes
3answers
814 views

Is there a way to use my kegging system to carbonate beer for bottling without a beer gun?

The only solutions I've found are expensive, and involved a pricey piece of equipment called a beer gun. Is there a way to carbonate my beer before bottling so I can ensure a good carbonation?
4
votes
1answer
273 views

What are the exact dimensions/specs of the fittings on a standard stainless steel Hansen Coupler?

I have a standard stainless steel Hansen Coupler for Pin-Lock type Cornelius Kegs. I'm trying to find the exact specs on both the 1/4 MFL and the inside (female) threads, where it connects to the ...
3
votes
1answer
495 views

Is there a standard size for CO2 tank nozzles?

I'm thinking of buying this kegerator on Amazon, but was wondering if the smaller tank size will make it harder to find a place to fill it. Also, if I'd like a bigger tank at some point will the ...
1
vote
0answers
481 views

Where can I buy a keg of Strongbow Cider in Virginia (near DC)? [closed]

I am looking for a place where I can buy Strongbow Cider in Northern Virginia, preferably near Washington D.C. Does anyone know of a distributor?
9
votes
6answers
354 views

What to look for in second-hand kegs?

In order to save some cash I'm thinking of buying some 2nd hand [19L/5G] kegs. When visiting a seller, what kind of inspection should I do to ensure that the kegs will last? Are there any tell-tale ...
7
votes
2answers
877 views

How do I clean a 5 gallon root beer keg?

I was given a pair of Virgils kegs with root beer still in them, and I've been wanting to use them for homebrewing. I was at a brewery tour a little while ago and I was told that it's nearly ...
8
votes
1answer
759 views

Cold Conditioning in carboy vs keg

I have a wheat and a golden ale, both in 5 gal carboys, that have been in secondary fermentation for 2 weeks. I was planning on letting them settle for another week and then transferring them to kegs ...
6
votes
1answer
852 views

What do I need to refurbish a corny keg?

What do I need to prepare a used corny keg (picked up at a flea market say) for brewing? Should I replace the seals? Do I need a special tool to remove the posts? What products and techniques ...
6
votes
2answers
869 views

Pros and Cons of different keg types?

What are the Pros and Cons of the different keg types, e.g.: Plastic barrel keg, such as a King Keg Cornelius/Corny Keg? Edit - following the comment from PJ can I clarify that this question is ...
14
votes
4answers
108k views

How long do I have to finish a keg once it's been tapped?

I have a kegerator setup with CO2 and a tap. Once a keg has been put into the kegerator, how long will it stay good? What can I do to ensure that I get the longest life possible out of a keg once ...
6
votes
3answers
5k views

Re-use the mini kegs that are used in 'Krups Beer Tender' for home brewing?

For me, these 5 liter kegs seem like the perfect device for storage as well as remaining fresh when making beer. I understand there is a way to remove the top piece of the mini keg with some type ...