A (primarily metal) container for storing and serving beer.

learn more… | top users | synonyms

0
votes
1answer
21 views

What is the best way to stop fermentation?

I am thinking about brewing ginger beer for a bar I work at. This means it would be in a keg on a tap. I would like to ferment the ginger beer instead of pumping in CO2 but am unsure how to go about ...
2
votes
3answers
184 views

Kegging Vs Bottling in regards to Conditioning

I recently started kegging, roughly 6 batches ago. Initially I would keg two batches and place them in the refridgerator, waiting two weeks for them to carbonate "naturally" (as opposed to "forced" ...
1
vote
2answers
79 views

How hard must I tighten the posts on the keg?

I purchased two used kegs from NB. I went to Home Depot with one of the kegs and bought the deep sockets to take the posts off. In the store I was unable to pull either the in or out posts out. I ...
1
vote
1answer
77 views

What should I expect to pay for pin lock Corny Kegs?

It seems like corny keg prices are all oer the map. doing a simple search for "used pin lock cornelius keg" I see them from $11.99 on ebay to $38.95 on Cornykeg.com That's a huge swing. Relatively ...
3
votes
2answers
251 views

How do you open a Type-S (European) Sankey keg?

I own a Type S Sankey keg. How can we open it for cleaning, sanitization, and filling? In particular, is there a tool we can purchase to make opening and re-closing safe and easy?
2
votes
2answers
145 views

What kind of connectors do I need for my keg, and where can I get them?

I have a European Sankey keg with a Type S tap, but my CO2 container only has connectors for a ball-lock valve. What connectors do I need to get the tap pictured attached to my CO2? It would help to ...
2
votes
3answers
666 views

How is the Heineken Draughtkeg made?

I am sorry for the noob question, I'm not a beer professional, but just curious about some things :) So I've seen this thing: http://heinekendraughtkeg.com/ and it looks like barrel with a CO2 tube ...
5
votes
3answers
4k views

Why am I getting foam in my keg line when dispensing?

I have a two-tap kegerator which I use to dispense commercial 5-gallon kegs. My lines are about 3 feet long1 and I keep my pressure at 10psi and my temperature relatively cold. Whenever I draw from ...
1
vote
2answers
185 views

Threaded portion of corny keg - removable?

I am trying to change over 3 pin-lock kegs to ball type. I got the posts and they include the threaded portion that normally protrudes from the top of the keg. Everything went fine for 5 out of 6 ...
7
votes
2answers
1k views

How often should a keg be disassembled and cleaned?

Right now I give my corny kegs and beer lines a hot rinse, PBW soak, rinse and Starsan in-between batches. I inspect for gunk but don't fully disassemble (posts, etc.) unless there's something ...
1
vote
3answers
195 views

I have a keg, now what?

A co-worker of mine had a roommate move out and leave his brewing stuff behind, including two 5 gallon kegs (pictured below). Co-worker ended up giving them to me for free. Obviously you need a CO2 ...
5
votes
1answer
213 views

Is cold CO2 required for proper kegerator?

I've seen most in-home kegerators have the CO2 tank and regulator inside the fridge. But I remember from my bar-working days that the CO2 tank was outside the fridge. Does this really make a ...
1
vote
1answer
1k views

Can a keg explode?

As I read in some answers to other questions they should not explode, is it true? Why is that? Is it because they have a safety valve or just because they are very strong?
4
votes
3answers
397 views

Keeping beer from entering CO2 line while Carbing Keg?

So I am getting ready to carbonate my first keg! But I am worried about beer entering the CO2 line if I use the 'rock on my lap like a baby' method :) I am worried because I tried to carbonate a ...
1
vote
3answers
230 views

Rubber Keg Boot Glue Recommendation

I just bought two reconditioned 5 gal pin lock kegs. When I filled them up with hot water to clean them out I noticed that the rubber boot at the top of one of them was completely loose - it's only ...
0
votes
1answer
251 views

Keeping pressure in secondary keg

I recently started brewing again as I was bought some new kit: 5 gallon fermenting bucket 5 gallon plastic keg with tap This is the first time I've brewed without bottling. I've just got my wort ...
1
vote
3answers
365 views

Keg Management Systems

I'm looking for a way to keep track of the state of my kegs - how many times were they washed with a caustic cleaner since the last acid cleaning, how long ago was it cleaned (and pressurized), what ...
1
vote
1answer
238 views

Does kegging require a fridge

I was planning on building myself one of these for the summer: http://www.homebrewtalk.com/f51/portable-igloo-cooler-kegerator-172047-post1990392/ I currently bottle all my beer and don't own any ...
3
votes
2answers
1k views

How can I ferment in a corny keg under constant pressure?

I'm thinking about switching from fermenting (primary and secondary) in glass carboys to using Cornelius kegs. Specifically, I'd ferment a 5.5 gallon batch in a 10 gallon carboy. My goal is to ...
4
votes
1answer
127 views

Disconnecting a keg

I have a mobile bar business and wanted to add draught beers to our menu. I am a layman with regards to this but I understand how the basic system works using a CO2 (or 70/30 CO2 & Nitrogen) and ...
1
vote
2answers
484 views

Kill yeast in keg

I've got a batch of cider that I've kegged. I did so at about 1.011 (OG was 1.052 IIRC). While the yeast activity will decline as the keg chills, I'd like to stop it completely so that I can bottle ...
2
votes
2answers
225 views

How quickly do i need to drink my beer?

I've somehow managed to brew a bloody lovely bitter (for my first time) in a pressurised keg but now i've started drinking it, is there any kind of best before? Or do I literally need to drink 10 ...
2
votes
1answer
820 views

Transporting Pressurized CornyKegs

I wanted to get a batch ready for labor day, so I purchased some kegging equipment and opted to keg this beer. However, I am driving 5ish hours to a lake, where I plan to keep the keg in a ice bath ...
1
vote
1answer
332 views

Troubleshooting new keggerator equipment - sanke tap, gas manifold, etc

I've been using a converted chest freezer for nearly a year now for storing and dispensing from corny kegs and for lagering. Depending on whether I have kegs of homebrew, I may have a sanke keg of ...
3
votes
2answers
226 views

Got first 2 kegs and need advice

I just bought two 15.5 gallon kegs yesterday from a local brewery that is closing its doors. They asked for $15 each so there was no way I could pass them up. They are in great condition. I would ...
2
votes
2answers
1k views

Is a dual-body CO2 regulator worth the additional cost?

I have a five cubic foot chest freezer converted into a kegerator. Since I set this up, I've had a standard regulator and one corny or sixth barrel sanke keg in there at a time. I'm planning to slowly ...
1
vote
1answer
878 views

How can I seal off the liquid line on a sankey keg to allow force carbonation?

I want to carbonate several sankey kegs, but the keg couplers have the liquid line open, so if I apply CO2 to them, the beer will come out if I don't have a serving line connected, I only have 2 ...
2
votes
2answers
569 views

Does keg secondary fermentation temperature matter?

I'm considering investing in a keg, fridge, etc. I live in a warm climate and currently do secondary fermentation in the bottles in the heat. I've read that people have chest freezers to store kegs. ...
1
vote
1answer
522 views

What size keg to get for 23L brews?

I'm thinking about investing in a keg, etc. done some reading but still have a lot of questions. I currently bottle from brew cans which fill the fermenter to 23L and comes out to about 30x 750ml ...
4
votes
1answer
153 views

Gas line : does it need to be sterilized?

I'm reading websites and I'm viewing videos where people show how to wash kegs, but they never wash their gas line. I was wondering if it's necessary to do so? I'm asking this because I would like to ...
4
votes
3answers
1k views

How Long Will a Keg Hold Carbonation if Disconnected from the CO2 Tank?

How long will a keg hold carbonation if it is disconnected from the CO2 tank? Does the type of keg matter?
3
votes
2answers
2k views

How to properly keep a warm kegged beer (short term)

This is a combination keg/carbonation/beer storage question. I have only fridge/freezer room for either a carboy or my (currently 1) keg. I have about half of the corny keg left of a light cream ...
3
votes
2answers
186 views

(Should) my keg floweth over?

So, I kegged my first time (straight from a 3.5wk primary vs 2wk, which I recommend). I tried a little bit of the "force carb", i.e. set to 25-30psi and agitate the keg until I didn't hear any more ...
3
votes
2answers
1k views

Dangers of Sanke Kegs

I recently told some other brewers how I have used a Sanke keg and they tried to convince me that they were dangerous. They had heard of the ball being shot up out of the keg when trying to clean ...
5
votes
2answers
562 views

Keg/CO2 question as I think about moving to kegging

This is probably a foolish one, but... So you can force carbonate with a keg (or sugar carbonate, but of course why would you), and then serve from the keg with the CO2 to help dispense. But, if ...
3
votes
1answer
188 views

what can I do with an old corny keg?

I have a corny keg with a neck that doesnt seal what else can i do with it besides carb. and serve beer? above the seal it is all bent up and have tied to repair with no success.
5
votes
1answer
218 views

Emptying bottles into a keg

I have about 3 gallons worth of IPA that are sitting in bottles. I just got a new 5 gallon keg and I really want to use it. Would it be a good idea to empty my bottles into the keg or is this ...
5
votes
3answers
6k views

How do I reduce the amount of head when dispensing from a keg?

I just got a couple of used kegs from a former brew club member, he had to move away and sell all his brewing supplies :-( The good news was that I picked up two kegs, a CO2 tank and all the required ...
11
votes
3answers
804 views

Is there a way to use my kegging system to carbonate beer for bottling without a beer gun?

The only solutions I've found are expensive, and involved a pricey piece of equipment called a beer gun. Is there a way to carbonate my beer before bottling so I can ensure a good carbonation?
4
votes
1answer
268 views

What are the exact dimensions/specs of the fittings on a standard stainless steel Hansen Coupler?

I have a standard stainless steel Hansen Coupler for Pin-Lock type Cornelius Kegs. I'm trying to find the exact specs on both the 1/4 MFL and the inside (female) threads, where it connects to the ...
3
votes
1answer
485 views

Is there a standard size for CO2 tank nozzles?

I'm thinking of buying this kegerator on Amazon, but was wondering if the smaller tank size will make it harder to find a place to fill it. Also, if I'd like a bigger tank at some point will the ...
1
vote
0answers
480 views

Where can I buy a keg of Strongbow Cider in Virginia (near DC)? [closed]

I am looking for a place where I can buy Strongbow Cider in Northern Virginia, preferably near Washington D.C. Does anyone know of a distributor?
9
votes
6answers
349 views

What to look for in second-hand kegs?

In order to save some cash I'm thinking of buying some 2nd hand [19L/5G] kegs. When visiting a seller, what kind of inspection should I do to ensure that the kegs will last? Are there any tell-tale ...
7
votes
2answers
869 views

How do I clean a 5 gallon root beer keg?

I was given a pair of Virgils kegs with root beer still in them, and I've been wanting to use them for homebrewing. I was at a brewery tour a little while ago and I was told that it's nearly ...
8
votes
1answer
747 views

Cold Conditioning in carboy vs keg

I have a wheat and a golden ale, both in 5 gal carboys, that have been in secondary fermentation for 2 weeks. I was planning on letting them settle for another week and then transferring them to kegs ...
6
votes
1answer
843 views

What do I need to refurbish a corny keg?

What do I need to prepare a used corny keg (picked up at a flea market say) for brewing? Should I replace the seals? Do I need a special tool to remove the posts? What products and techniques ...
6
votes
2answers
858 views

Pros and Cons of different keg types?

What are the Pros and Cons of the different keg types, e.g.: Plastic barrel keg, such as a King Keg Cornelius/Corny Keg? Edit - following the comment from PJ can I clarify that this question is ...
14
votes
4answers
106k views

How long do I have to finish a keg once it's been tapped?

I have a kegerator setup with CO2 and a tap. Once a keg has been put into the kegerator, how long will it stay good? What can I do to ensure that I get the longest life possible out of a keg once ...
6
votes
3answers
5k views

Re-use the mini kegs that are used in 'Krups Beer Tender' for home brewing?

For me, these 5 liter kegs seem like the perfect device for storage as well as remaining fresh when making beer. I understand there is a way to remove the top piece of the mini keg with some type ...
3
votes
1answer
503 views

Pin lock vs Ball lock

When it comes to corny keg disconnects, what are the pros and cons of pin lock vs ball lock posts? Seems like there are more spare parts available for the ball lock kind.