The various hardware items for producing beer or wine. Includes buckets, carboys, kegs, hoses, airlocks, etc.

learn more… | top users | synonyms

2
votes
2answers
156 views

Fermenter head space and airlock hole

Hi folks I'm after a bit of advice as its my first time doing home brew I'm using Wilkos dark velvet stout. As it states on the tin to make 40 pints fill, to 23 litres. Now I have a 23 litre ...
2
votes
2answers
786 views

Looking to get a new grain mill and want some advice

Long story long, I live next to a "brew on premise" and have always used their mill (barley crusher) to mill my grains. But now I am moving and time to grow up and get my own, does anyone have advice ...
2
votes
1answer
452 views

How to ferment 15-gallon batches

It's probably a simple solution, but I'm planning on making the jump to AG very shortly and, having only done 5-gallon batches in the past, am wondering what is the easiest way to ferment a full ...
2
votes
1answer
347 views

Is normal PVC tubing okay for a racking tube?

I'm having a few issues finding food-grade plastic tubing to use a racking tube. Is normal clear PVC tubing that you'd get at a hardware store okay for this? (Once it's been sterilized etc of course) ...
2
votes
2answers
232 views

What characteristics should a bucket have to be suitable for a mash tun?

Does it need to have anything special or any food-grade bucket would do?
2
votes
1answer
174 views

What supplies to bring to a beer festival?

At the risk of being flagged off-topic, as this is a bit tangential to actual brewing and fermentation... It's Spring, and the beer festival season isn't exactly in "full-swing" yet, but I don't know ...
2
votes
1answer
311 views

How big do the holes need to be in a Zapap style Mash/Lauter Tun?

I'm looking to make one of the mash tuns out of a plastic bucket. I find instructions like "drill a bazillion holes into the bottom with a small drill bit". How small? Is there a size that's too ...
2
votes
1answer
890 views

Which size auto siphon to empty a 5 or 6.5 gallon carboy?

I got an auto siphon as a gift recently. Unfortunately, it only reaches about half-way down into the carboy. All the brew supply sites and the fermtech site, itself, aren't exactly clear about the ...
2
votes
4answers
88 views

Carboy versus 2nd Bucket

What are the benefits in using a carboy for a secondary, rather than just using another 5 gallon bucket? I'm just curious because carboys are a pain in the behind to clean properly, and other than ...
2
votes
1answer
372 views

Bottle drying after sanitisation?

When sanitising and using a bottle tree, should I wait for bottles to dry completely or can I use them just rinsed? The Youngs sanitiser I'm using says items should be used within 1 hour of being ...
2
votes
3answers
2k views

Can a Johnson A419 control both a heater and cooler, or is a single-mode?

I just recieved a Johnson A419 digital temperature controller, but I think I was mistaken in my expectations. I was under the impression I could plug both a heater and cooler into the controller; ...
2
votes
1answer
266 views

Kegging at basement temperature

I am a novice at kegging. I don't have room for a kegerator or chest freezer so I simply keg at basement temperature. My basement is currently 69 F and I've had 5 gallons of tripel on pressure for 3 ...
2
votes
1answer
6k views

Carboy dimensions

What are the dimensions of a 5.5 and 6 gallon standard glass carboy?
2
votes
2answers
62 views

plastic storage for bottles

I just found out that roaches harbor in cardboard boxes. Not to mention that cardboard breaks down easily when filled with damp, freshly sanitized bottles. Does anyone have suggestions for plastic ...
2
votes
2answers
658 views

Checking for CO2 leaks

If you have an at home draft system, how do you check for leaks in the CO2 side of the set up? How often do you need to check for leaks?
1
vote
3answers
102 views

What are the simple things i should be careful about (like bleach) for my first time brewing?

I'm planning to make my first batch within the next couple of days and was checking what all thing i should not OVERDO (like bleach sanitation). Should i be careful before i cap my bottle (i don't ...
1
vote
2answers
213 views

What are the differences between mashing and steeping grains in preparation

What is the difference between mashing and steeping grains in terms of preparation style or is "mashing" and "steeping" just word semantics?
1
vote
3answers
185 views

How should I upgrade equipment from a Mr. Beer kit?

I have used a Mr. Beer kit two times now with acceptable success. I want to move to the next level. Can someone tell me the best kit to buy and a good book for starting?
1
vote
1answer
202 views

Capper indents bottle cap. Is this ok?

I have a standard, hand held bottle capper and when I am using it I am getting indentations in the cap. The larger problem is that I am having issues with inconsistent carbonation and want to ...
1
vote
2answers
153 views

Turn Bottling Bin into a Mash Tun?

If I attach a removable mesh filter to hold back the grains and I properly insulate the entire bottling bin, can I dual wield it as a bottler and as a mashing tun? What benefits are there to having ...
1
vote
3answers
240 views

How to make more beer than I can boil?

I will soon need to buy some more equipment, but I want to think it a little bit what I really need to buy and in the meantime I will try some workaround. I was thinking of brewing mash/extract ...
1
vote
2answers
5k views

Where are MillerCoors Light Home Draft units available?

MillerCoors used to sell Coors Light Home Draft and Miller Light Home Draft "kegs" at my local grocery store, but I have not seem them in a long time. The reason I ask is because these units are ...
1
vote
4answers
75 views

airtight bin for bulk grain

We are having a really hard time finding a truly airtight bin large enough to keep at least 50 lbs of bulk grain in. Does anyone have any suggestions? We keep our grains in the shed and want to keep ...
1
vote
2answers
63 views

Cooler mash tun: prevent leaks from faucet

I've add some mishaps with my standard Coleman-based mash tun, and I'm now left with a hole where the faucet was (some wort went inside the insulation, but I'd like to believe it won't impact ...
1
vote
1answer
116 views

HERMS waterproof hole in heat exchanger

I'm in the initial phase of my HERMS project, and I'm struggling to come up with an elegant solution to waterproofing the hole where my copper pipe will enter the hot liquor tank. Ideally I'd like ...
1
vote
2answers
211 views

Food Grade Steel Drums

I'm thinking about buying some a HUGE Blue food grade steel drums, which is either painted or enameled.If I correctly modify them, will these be okay for FV, Mashing Tubs, Boil Kettle, Strike Boiler? ...
1
vote
1answer
181 views

Clean kegged, put back together wrong

I recently brewed my second batch of 2x 5 gallon beers. The first time, kegs were recently reconditioned and so I did a quick clean and filled them up. This time, being some time later, I went ahead ...
1
vote
1answer
360 views

Recommendations for scaling up operations

Right now I brew once month. This gets me to 60-72 gallons of delicious wine or beer per year. But the limit for home brewers in the US is 200 gallons per year per household. To reach that with 5 ...
1
vote
2answers
46 views

Heat spreaders on electric elements

I use electric kettle and hlt, the issue I keep having is that the brews keep coming out darker than I want. This went unnoticed when brewing stouts and bitters, but I have tried a couple of very pale ...
1
vote
1answer
39 views

Push fit auto close valve connector required

This is a question about gear more than brewing, per se... I'm wondering if a particular component exists... I'm trying to find a connector suitable for my system that will allow me to disconnect my ...
1
vote
1answer
7k views

What is a grant?

How is it used? What does it do?
1
vote
1answer
53 views

Beer Smith 2 Equipment settings.

Just got Beer Smith 2 and I was wondering if anyone has done equipment profiles and could give me some pointers on where to start. Prost
1
vote
2answers
100 views

Will my airlock problem ruin my wine?

I'm brewing a Barolo wine which is now stabilizing in a carboy with a bubble airlock fitted, the water from the airlock is being drawn into the carboy. Is this normal ? If not how can I stop this ? ...
1
vote
1answer
90 views

Starting out with fruit wine?

I have never brewed, but I am playing with the thought of starting to make fruit wines. While I can get very good alcohol of other categories, fruit wines are rare, and some types are not sold here at ...
1
vote
2answers
190 views

Boil kettle from plastic fermentation bin

Can a plastic fermentation bin be modified with a heater element to make a strike-water heater or a boil-kettle?
1
vote
1answer
2k views

What Beer Line or Hose Size Fits the Cornelius/Corny Keg Barbed Quick Disconnects?

I'm needing hoses to run to and from my barbed ball-lock quick disconnect on my cornelius keg. Which diameter should I be getting? Do I need reinforced hoses? Answer: 1/4" (6mm) Inner ...
1
vote
1answer
256 views

Johnson A419 BLE/WiFi Modification

I'm a software engineer who just bought a Johnson A419. I have a Nest thermostat. Naturally, if I can control and monitor my house temps with my iDevices, why not my fermentation? I'd like to hack ...
1
vote
1answer
74 views

Is tin safe on the mash?

A friend is building a manifold and the copper connections he bought have a bit of tin (Sn) on it, supposedly to make the solder easier. He is not going to solder them so the tin will remain in ...
1
vote
1answer
283 views

Looking for a specific fitting

I bought a blichmann therminator, and I want to hook up stainless camlock/ groove 1/2" nipples to all 4 "openings". Problem is, the coolant line in/ out are 3/4" GHT, which, while I understand why ...
1
vote
3answers
213 views

Brew stand recommendations

My buddy and I are looking to upgrade to a 20 gallon brew stand, and I'm looking for recommendations between buying a full setup, which brand, or making one ourselves.
1
vote
2answers
170 views

Equipment for Raising Mashout temp

We are currently using a pump to circulate the mash through a coil in the heated sparge water, this works well and reaches mash out in under 20 min. The only worry is with the water in the sparge ...
1
vote
2answers
274 views

Malt mill gap adjustment

The nature of my work is such that i have all the materials and tools to make a mill so i am not intrested on buying one.I want to know if there is a standard gap between the rollers for all type of ...
0
votes
3answers
165 views

Should I buy two buckets?

There is a sale on homebrew equipment at the moment, and I am adding things to my basket to mimic a starter kit. One thing that I notice is that the kits come with a single fermentation bucket. ...
0
votes
4answers
176 views

It is necessary to sanitize my wine thief after primary fermentation

I have made several batches of wine from kits and a few batches of mead. One of the things that must be done after primary fermentation is to test the specific gravity. The wine kits I have used ...
0
votes
2answers
137 views

Trouble with flat beer. Everything seems perfect and a few bottles always turn out great. very few! Please help

So my brother in law are in the midst of our 4th batch. Of our first batch ( a 5 gallon brew) probably 2 bottles turned out. These bottles were spectacular great carbonation, retention etc. The ...
0
votes
2answers
64 views

Long term storage of equipment like buckets and kegs, lines, etc

I'm moving, so I'm emptying my kegs (not down the drain!), and as I go I'm cleaning lines, emptying buckets, disassembling taps, etc.; and trying to figure out how best to store everything (assume it ...
0
votes
2answers
426 views

Monster Mill v.s. Kitchen Aid Mill attachment

We've been looking into getting a grain mill for some time now. I was pretty settled on getting a monster mill or some version of it until I saw the kitchen aid milling attachment. If this would work ...
0
votes
1answer
91 views

Control Products 9102D Temperature Controller won't go below 50 degrees?

So I got a dual stage controller (http://www.amazon.com/gp/product/B0057APR3I/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1) to hook up to a keezer that I am making. I got it wired up today and was ...
0
votes
3answers
56 views

How to remove/service static relief valve on a pin lock keg?

i have a pin lock keg with a leaking static relief valve. The lid looks like this: I can't figure out how to remove the innards of the relief valve to fix it. Any ideas?
0
votes
1answer
52 views

Do three-way ball valves control flow rate as effectively as one-way ball valves?

I'm planning on implementing three-way ball valves in my three vessel, single pump system and I want to be able to regulate flow on the outward side of the pump. Will a three-way ball valve ...