The various hardware items for producing beer or wine. Includes buckets, carboys, kegs, hoses, airlocks, etc.

learn more… | top users | synonyms

2
votes
3answers
1k views

Which material for a manifold in a converted cooler mash tun?

I've been using a stainless braid for the last 3 years or so in my Igloo Ice Cube cooler. Despite my being careful, it has gotten compressed in a couple of places over the years, and I'd like to ...
9
votes
1answer
1k views

Carboy Cap vs. Stopper

Is one better than the other? Why? Carboy Cap: http://www.northernbrewer.com/brewing/3-5-6-gall-carboy-cap-orange.html vs. Stopper: ...
8
votes
6answers
2k views

Why do my airlocks lose liquid?

This has happened with a few batches now. My three-piece airlocks are drained of the sani inside them repeatedly. Even after a few days, when fermentation doesn't seem as rapid (and therefore the ...
12
votes
3answers
5k views

How to brew less than 5 gallons at a time?

I recently moved into a smaller apartment and no longer have the space for my 6.5 and 5 gallon carboys. Do people sell smaller carboys than this? I know Mr. Beer would be small enough, but I'd ...
4
votes
4answers
2k views

What is a wort chiller?

Should I use a wort chiller, and what are the advantages of doing so?
6
votes
4answers
1k views

How to transport homebrew

I'm in the process of brewing several carboys of beer to serve at my wedding in a few months. The catch is that the wedding is on the other side of the country. I'm planning on taking a few days to ...
6
votes
2answers
608 views

How to measure wort oxygenation

As a follow-up to a couple of other questions: How to Properly Oxygenate Wort Wort aeration on a budget How do you measure oxygenation of wort? What methods are available for a beginner brewer ...
3
votes
3answers
1k views

My beers are with a slight acid taste after the few first sips. What could be wrong?

So far I have brewed 5 times. First went perfect, though it was the first time I was using my kit and the grains were already ground. Second and third batches went wrong. My concern is with the last ...
5
votes
6answers
2k views

Wort aeration on a budget

To aerate my wort I have been using a whisk, but i am worried about contamination. What are other more effective ways to aerate wort without spending too much money?
11
votes
12answers
10k views

How to brew all-grain indoors

I've been brewing with extracts and specialty grains for two years now, and I want to step up to all-grain brewing. From what I understand, it's important to get a full boil when brewing all-grain and ...
6
votes
3answers
883 views

Can I use my Country Living Grain Mill for homebrewing?

I already own a Country Living Grain Mill for making flour and want to start crushing my own grain for my homebrew. Will this style of mill work for homebrew or should I buy a mill specially for ...
0
votes
1answer
565 views

Basic equipment needed for all grain brewing [duplicate]

Possible Duplicate: What is the minimum amount of equipment to dabble in All-Grain? I'm considering working on my first all-grain brew batch. What are the bare essentials of equipment to do ...
4
votes
2answers
330 views

Carbonating Kegs In Quantity

Does anyone have any suggestions for how to build a rig to carbonate multiple corny kegs at one time? I currently have a high pressure CO2 line in my beer fridge so that I can carbonate one that is ...
3
votes
2answers
5k views

What wattage element is needed for hot liquor tank/heat exchanger, and what about brew kettle?

I'm completely captivated by www.theelectricbrewery.com, love their directions, and have ordered the parts, so I'll have my experience soon, but what is your experience with selecting hot water heater ...
3
votes
2answers
1k views

What are some popular methods for measuring boil and HLT volume?

Particularly during lautering and during a boil, I have a hard time keeping track of water/wort volume. What method(s) and equipment do you all recommend for accurately calculating liquid volume ...
5
votes
3answers
1k views

How do you insulate a cooler based mash tun?

I have a Coleman 70 Quart Xtreme cooler that I've modified for my mash tun. I seem to be losing a lot of heat out the top. Are there any good ways to insulate it to help prevent heat loss?
10
votes
7answers
4k views

Aluminium boil pots: Heresy or not?

Are aluminium pots acceptable as boil vessels? They're cheap, but I've heard they can produce off-flavors. Any experiences with them?
10
votes
4answers
2k views

What material should I make my brew paddle with?

I've been using the cheap plastic spoon that you'll typically find at your local homebrew store. It's pretty terrible when it comes to agitating my mash tun. Heat + Resistance = Bent plastic spoon. ...
7
votes
4answers
2k views

What equipment do I need to start making mead?

What equipment do I need to start making mead at home?
4
votes
3answers
698 views

What equipment do I need to starting making wine?

What equipment do I need to start making wine at home?
10
votes
5answers
1k views

What is the minimum amount of equipment to dabble in All-Grain?

What is the minimum amount of equipment I need to have to brew very simple all-grain recipes? Bonus points for cheap & easy-to-find equipment. I'd like to go all-grain eventually, but for the time ...
8
votes
1answer
375 views

How often do people replace their plastic brewing components?

I recently threw out my racking cane, it was turning cloudy and there was a piece of trub stuck in it that I couldn't get out for the life of me. I remember the lady at a LHBS telling me you should ...
10
votes
7answers
1k views

Are bottle brushes necessary?

I've always bottled my beers (haven't invested in a kegging setup yet), and I've never once used a bottle brush. I simply soak my bottles in OxyClean to clean them, give them a shake, then rinse, ...
4
votes
3answers
1k views

Is there a standard siphoning hose size?

We have a hose that fits some of our equipment (bottle filler wand) but it is loose on both the racking cane and auto siphon. Is there a standardized size for this equipment or does it vary?
3
votes
2answers
1k views

Optimal counterflow wort chiller

I am planning to build a counterflow wort chiller using a hose outside of a copper tube. There are a great variety of lengths and types available commercially and I have read that many commercial ...
31
votes
6answers
9k views

How likely is contamination in an average batch?

I sanitize everything; carboy, bottles, bottle caps, tubing, funnels, etc; because I was essentially told that my beer would turn to deadly poison without it. I accept sterilizing the lot once ...
9
votes
5answers
1k views

Best way to mill grains

I've brewed many extracts but want to get into whole grain brewing. What equipment do I need? Any recommendations for beginner / low-cost grain mills?
0
votes
0answers
134 views

Must-have supplies for making one's own beer? [duplicate]

Possible Duplicate: What equipment do I need to buy to start homebrewing? What are the must-have supplies for brewing your own beer? In addition to ingredients, what types of containers, ...
48
votes
5answers
4k views

What equipment do I need to buy to start making beer?

What is the minimum equipment to start brewing some good beer at home?
2
votes
1answer
266 views

Kegging at basement temperature

I am a novice at kegging. I don't have room for a kegerator or chest freezer so I simply keg at basement temperature. My basement is currently 69 F and I've had 5 gallons of tripel on pressure for 3 ...
6
votes
3answers
660 views

Best Crown Capper

Just capped my first batch of beer (Wohoo!). When I invested in my equipment though, I think I was a bit too frugal with my capping tool - I have a hammer on crown capper. It seems to have done the ...
6
votes
3answers
6k views

Re-use the mini kegs that are used in 'Krups Beer Tender' for home brewing?

For me, these 5 liter kegs seem like the perfect device for storage as well as remaining fresh when making beer. I understand there is a way to remove the top piece of the mini keg with some type ...
7
votes
5answers
5k views

How long do sanitized bottles keep?

If you sanitize a bunch of bottles and store them upside down on a tree or in a box (still upside down); how long can you store them like that before you feel the need to resanitize them? Is there a ...
5
votes
3answers
1k views

Cleaning out beer lines

How often do you need to clean out your beer lines when using a home draft system? What type of cleaner do you use? Can I leave sanitizer in the tubing when a line isn't in use?
2
votes
2answers
658 views

Checking for CO2 leaks

If you have an at home draft system, how do you check for leaks in the CO2 side of the set up? How often do you need to check for leaks?
3
votes
1answer
423 views

What is a swamp cooler?

What type of equipment do you need to build one? How do you use it? What are the realistic expectations of using one?
5
votes
4answers
693 views

First Time Brewing…am I doing it right?

So I went to my local brewing store, and got a starter kit. It came with a 7 gallon fermenter, a siphon tube, a floating thermometer, bottle caper, bottle caps, bottle scrubber, and sanitizer. By the ...
12
votes
9answers
11k views

Using a Induction cooktop

I have been brewing in my kitchen using a giant stockpot. My brother (my brewing partner) was thinking about picking up propane top and moving it outside. I think that it would be better to use an ...
3
votes
2answers
340 views

Recirculating wort chiller

I am building an recirc arm for my chilling set up. Should my recirc have a gentle bend in it to 90degrees or would it be OK to just use a 90degree elbow of a piece of straight pipe under the wort ...
8
votes
2answers
962 views

Keeping a bottle of no-rinse sanitiser

Some sanitisers, like star-san, chemipro oxi and betadine are no-rinse in certain dilutions. Star-san can additionaly be kept diluted in a bottle for months and used whenever one wishes. Can the same ...
3
votes
2answers
508 views

Open Fermentation Process

Can open fermentation be done simply by putting the fermenting beer in a bucket carboy and covering it with foil? The purpose of the foil would be to just keep airborne contaminants from falling into ...
6
votes
1answer
4k views

What's the ideal size for a mash tun?

This question has been bothering me for a while and I looked it up using google. The only related search result was this thread http://www.homebrewtalk.com/f11/how-big-your-mash-tun-needs-123585/ ...
2
votes
1answer
346 views

Is normal PVC tubing okay for a racking tube?

I'm having a few issues finding food-grade plastic tubing to use a racking tube. Is normal clear PVC tubing that you'd get at a hardware store okay for this? (Once it's been sterilized etc of course) ...
4
votes
3answers
298 views

What are some good places to get a keg for a brew kettle?

I got my first keg from a beer store, whom I asked if they had any kegs I could buy outright. The keg they "sold" me was in really good condition, and only cost me $30. I'm looking to get a second ...
4
votes
2answers
391 views

Did I Break My Airlock?

I don't really know what I did here. I cut off the bottom little cross guy on the stem of the airlock because it was getting clogged up during vigorous fermentations. Now the middle piece just kind of ...
5
votes
2answers
205 views

Dispensing beers at two different pressures?

I'm working on getting a dual-tap kegerator. Is it worth it to pay the extra to dispense two beers at two different pressures? I can see dispensing a low-carbonation ESB and a high-carbonation ...
4
votes
1answer
284 views

Use of a mash screen

I have recently had some problems with my false bottom and want to experiment with a mash screen. This might be a bit of a stupid question but I have never used one before: Can you do the mashing with ...
5
votes
3answers
1k views

[Wiki] What extra equipment do I need to make wine?

Considering I have all the necessary - and some unnecessary - equipment for making beer at home, what additional equipment do I need to make wine at home? If it's easier to just make a full list, ...
7
votes
3answers
2k views

How do you degas an empty Sanke Keg?

When folks legally acquire Sanke kegs for conversion to kettles, mash tuns or HLTs, the first step is often to relieve the pressure inside the keg before dismantling the spear and valve. How best is ...
7
votes
3answers
519 views

Cask beer at home

Anyone have a good source for getting smaller versions of a firkin for home use? I am interested in casking some beer at home for parties and special occasions. Are there any good links out there for ...