The various hardware items for producing beer or wine. Includes buckets, carboys, kegs, hoses, airlocks, etc.

learn more… | top users | synonyms

4
votes
3answers
718 views

What equipment do I need to starting making wine?

What equipment do I need to start making wine at home?
10
votes
5answers
1k views

What is the minimum amount of equipment to dabble in All-Grain?

What is the minimum amount of equipment I need to have to brew very simple all-grain recipes? Bonus points for cheap & easy-to-find equipment. I'd like to go all-grain eventually, but for the time ...
0
votes
1answer
567 views

Basic equipment needed for all grain brewing [duplicate]

Possible Duplicate: What is the minimum amount of equipment to dabble in All-Grain? I'm considering working on my first all-grain brew batch. What are the bare essentials of equipment to do ...
7
votes
9answers
582 views

What's a good first equipment buy after a basic starter kit?

I bought the First-Time Brewer's Starter Kit from Midwest Supply and enjoyed the process quite a bit. While the kit has the essentials for extract brewing, I know there are lots of things I can get to ...
6
votes
5answers
384 views

The right first kit?

I've seen a lot of kits and adds online to brew your own beer, but they don't seem all that easy or great. And any suggestions on what kit(s) to start with? How much should I plan to spend to get ...
14
votes
4answers
987 views

First Time Homebrewer Setup

There was a request for difficult questions, but having never brewed, this is all I've got: Can you describe the most basic setup (preferably one with a reasonably low difficulty and high success ...
6
votes
3answers
1k views

Why use a synthetic bag for BIAB?

Everywhere I see conversations about BIAB, people are always referring to nylon or polyester bags. Why can't one use, let's say, a cotton bag, since it will be so thin it won't hold any water?
9
votes
2answers
5k views

What is a whirlpool chiller?

What is a Whirlpool Chiller and how does it work? What are the advantages or disadvantages?
3
votes
3answers
376 views

Should I upgrade my thermometer or just re-calibrate it?

I'm asking this because I recently made the switch to all grain brewing, and I'd like to make sure I'm as accurate as possible for mash temps. I have a plain dial thermometer that I used for some ...
2
votes
1answer
460 views

How to ferment 15-gallon batches

It's probably a simple solution, but I'm planning on making the jump to AG very shortly and, having only done 5-gallon batches in the past, am wondering what is the easiest way to ferment a full ...
4
votes
1answer
117 views

Home method to measure sugar profile

Is there any sort of (financially attainable) test kit available to measure the sugar profile in wort and beer? In particular, I'd like to know the breakdown of glucose, fructose, sucrose, maltose, ...
3
votes
2answers
152 views

What exactly should I measure while brewing?

I want the answers to be geared towards meads/wines if possible. There seems to be so many things to measure. Which are the ones that really matter? I've started spending a lot of time taking all ...
2
votes
3answers
2k views

Can a Johnson A419 control both a heater and cooler, or is a single-mode?

I just recieved a Johnson A419 digital temperature controller, but I think I was mistaken in my expectations. I was under the impression I could plug both a heater and cooler into the controller; ...
4
votes
2answers
2k views

HERMS or RIMS - How to choose?

I'm confused. What are the major pros/cons between HERMS and RIMS brewing systems? I've read about both, but can't seem to come to a conclusion on why one would choose one over the other. Is it the ...
10
votes
7answers
1k views

Are bottle brushes necessary?

I've always bottled my beers (haven't invested in a kegging setup yet), and I've never once used a bottle brush. I simply soak my bottles in OxyClean to clean them, give them a shake, then rinse, ...
9
votes
4answers
1k views

Is it safe to use swing-tops?

I just started brewing my first batch (yay!) and want to set up for bottling while I wait. My question is simple: Can I start using Swing-Tops like Grolsch to bottle my beer? I've heard varying ...
2
votes
1answer
267 views

Kegging at basement temperature

I am a novice at kegging. I don't have room for a kegerator or chest freezer so I simply keg at basement temperature. My basement is currently 69 F and I've had 5 gallons of tripel on pressure for 3 ...
6
votes
3answers
6k views

Re-use the mini kegs that are used in 'Krups Beer Tender' for home brewing?

For me, these 5 liter kegs seem like the perfect device for storage as well as remaining fresh when making beer. I understand there is a way to remove the top piece of the mini keg with some type ...
5
votes
3answers
1k views

Cleaning out beer lines

How often do you need to clean out your beer lines when using a home draft system? What type of cleaner do you use? Can I leave sanitizer in the tubing when a line isn't in use?
2
votes
2answers
669 views

Checking for CO2 leaks

If you have an at home draft system, how do you check for leaks in the CO2 side of the set up? How often do you need to check for leaks?
10
votes
2answers
3k views

Using a keg for secondary fermentation and natural carbonation?

I would like to transfer a beer that has been fermenting for about 3 weeks directly into a Cornelius keg for secondary fermentation AND carbonation. I would like to add priming sugar and naturally ...
5
votes
2answers
857 views

Copper versus Stainless for Jockey Box

Not having room or budget for a kegerator at the moment, I am considering building a jockey box for kegging homebrew. There are a lot of plans on the internet for building your own, including ...
5
votes
1answer
132 views

How do I clean a sankey pump?

What is the best way to clean a sankey pump it after I use it so it doesn't get moldy inside?
8
votes
6answers
2k views

Why do my airlocks lose liquid?

This has happened with a few batches now. My three-piece airlocks are drained of the sani inside them repeatedly. Even after a few days, when fermentation doesn't seem as rapid (and therefore the ...
4
votes
2answers
394 views

Did I Break My Airlock?

I don't really know what I did here. I cut off the bottom little cross guy on the stem of the airlock because it was getting clogged up during vigorous fermentations. Now the middle piece just kind of ...
4
votes
2answers
2k views

Is it okay to ferment a 5 gallon batch in a 14 gallon conical fermenter?

I am considering getting a either a 7 gallon or a 14 gallon conical fermenter and am wondering if it would be okay to ferment a standard 5 gallon batch in the 14 gallon or if that would be a bad idea. ...
7
votes
8answers
1k views

Secondary size?

When moving a 5 gallon batch into secondary does it make a difference if it is into a 5 gallon carboy or a 6.5?
22
votes
7answers
2k views

Temperature Control for Fermentation

I am curious how everyone controls the temperature of their primary, especially those that live in the warmer climates. In Florida, where the temperatures can soar and remain in the 90's and above ...
4
votes
4answers
2k views

What is a wort chiller?

Should I use a wort chiller, and what are the advantages of doing so?
6
votes
4answers
1k views

How to transport homebrew

I'm in the process of brewing several carboys of beer to serve at my wedding in a few months. The catch is that the wedding is on the other side of the country. I'm planning on taking a few days to ...
5
votes
6answers
2k views

Wort aeration on a budget

To aerate my wort I have been using a whisk, but i am worried about contamination. What are other more effective ways to aerate wort without spending too much money?
3
votes
2answers
5k views

What wattage element is needed for hot liquor tank/heat exchanger, and what about brew kettle?

I'm completely captivated by www.theelectricbrewery.com, love their directions, and have ordered the parts, so I'll have my experience soon, but what is your experience with selecting hot water heater ...
5
votes
3answers
1k views

How do you insulate a cooler based mash tun?

I have a Coleman 70 Quart Xtreme cooler that I've modified for my mash tun. I seem to be losing a lot of heat out the top. Are there any good ways to insulate it to help prevent heat loss?
31
votes
6answers
10k views

How likely is contamination in an average batch?

I sanitize everything; carboy, bottles, bottle caps, tubing, funnels, etc; because I was essentially told that my beer would turn to deadly poison without it. I accept sterilizing the lot once ...
7
votes
3answers
2k views

How do you degas an empty Sanke Keg?

When folks legally acquire Sanke kegs for conversion to kettles, mash tuns or HLTs, the first step is often to relieve the pressure inside the keg before dismantling the spear and valve. How best is ...
4
votes
2answers
280 views

Rust in a plastic fermenter?

I've got a 6 gallon plastic fermenter - one of those food-grade plastic buckets Midwest gives you in the starter kit. I guess after our last brew, my brother and I carelessly tossed the remains of our ...
5
votes
3answers
598 views

Autosiphon not sealing

While racking beer to kegs today, my autosiphon started leaking air. Bubbles started at the bottom, and went throughout the tube. I assume that this is due to a poor seal between the pump portion ...
4
votes
1answer
426 views

What are the exact dimensions/specs of the fittings on a standard stainless steel Hansen Coupler?

I have a standard stainless steel Hansen Coupler for Pin-Lock type Cornelius Kegs. I'm trying to find the exact specs on both the 1/4 MFL and the inside (female) threads, where it connects to the ...
4
votes
2answers
335 views

Is this beerstone or something else? White haze in my kettle.

I recently moved. As part of the move, I changed my brewing process and went back to using my old brew pot (instead of an electric turkey fryer) and started using filtered tap water instead of ...
9
votes
5answers
2k views

Best way to mill grains

I've brewed many extracts but want to get into whole grain brewing. What equipment do I need? Any recommendations for beginner / low-cost grain mills?
2
votes
3answers
1k views

What equipment do I need to start brewing into 5L kegs?

I have just bought a 5L kegerator system for my office & would like to start bringing my homebrew in. What do I need to get started? Can I re-use purchased 5L kegs or are there any retailers ...
9
votes
8answers
438 views

Which pieces of brewing equipment seem like a good idea to buy, but are of limited usefulness?

My brewing buddy asked me this the other night. I've accumulated a lot of stuff over just an 18 month brew career. Not all of it useful. I know it's subjective, but I'd be very interested to hear ...
1
vote
1answer
365 views

Recommendations for scaling up operations

Right now I brew once month. This gets me to 60-72 gallons of delicious wine or beer per year. But the limit for home brewers in the US is 200 gallons per year per household. To reach that with 5 ...
2
votes
2answers
5k views

DIY Racking cane / Auto-siphon

I can't seem to find a local supplier that stocks a racking cane or siphon in my area so I'd like to have a go at making my own. I could find an online supplier but most US stores won't ship to AU ...
13
votes
10answers
4k views

Are there tools that can make the bottling process easier?

I found this to be the most difficult part during my first attempt at brewing. All I had was a tube and a racking cane. Is there anything else to simplify the process and prevent me from ending up ...
3
votes
3answers
456 views

Indoor-alternatives to kitchen stove

I am a kitchen-brewer doing 5 gls all-grain batches and am frustrated because the kitchen stove is lacking the last bit of power to yield a nice rolling boil. Are there any indoor-alternatives to the ...
5
votes
2answers
485 views

bottle filling without a rapid bottler

I'm about to bottle my first coopers home brew and i dont have a rapid bottler. Can I pour it straight from the tap or will I have problems?
2
votes
1answer
174 views

What supplies to bring to a beer festival?

At the risk of being flagged off-topic, as this is a bit tangential to actual brewing and fermentation... It's Spring, and the beer festival season isn't exactly in "full-swing" yet, but I don't know ...
2
votes
2answers
234 views

What characteristics should a bucket have to be suitable for a mash tun?

Does it need to have anything special or any food-grade bucket would do?
6
votes
2answers
623 views

How to measure wort oxygenation

As a follow-up to a couple of other questions: How to Properly Oxygenate Wort Wort aeration on a budget How do you measure oxygenation of wort? What methods are available for a beginner brewer ...