abbreviation of cornellius keg. A stainless steel tank, with gas in and liquid out posts that mate with quick disconnects for simple attachment and removal of hoses. 5 gallon capacity is the most common size used by homebrewers. Corny-kegs were most recognized in the soda industry for many years.

learn more… | top users | synonyms (1)

2
votes
1answer
138 views

What's the minimum size for a jockey box?

I'm planning on build one cooler based dispensing system for my kegs. My previous experience was with a box with 2 aluminium coils (~15m long) and 2 faucets. It holds a 20 Kg ice pack. And the beer ...
1
vote
1answer
27 views

How to choose the correct soda keg “type” replacement posts?

New to kegging, got myself a used ball lock Firestone/Pepsi soda keg. But when I've been cleaning and sanitizing the posts when I got it/after use, they seemed SUPER beat up. There is a washer (maybe? ...
1
vote
1answer
25 views

Keg corrosion potential of lemon juice adjunct

I have a recipe for a false cider that requires the addition of lemon juice after secondary fermentation prior to bottling/kegging. I've done this before in the bottle with good success but I'm ...
0
votes
3answers
61 views

Co2 shut-off valve

My 5lb co2 tank ran out after 2 uses. The 1/6 keg didn't even get kicked. Do u i need to turn the shut off to off to stop flow of co2 so it doesn't run out? Or do I have a leak?
1
vote
1answer
20 views

Poppet not sitting correctly in liquid post.

I'm having some real trouble getting the poppet to sit correctly in the liquid post of my keg. Below is an image with the poppet in: Notice that there is a sizable gap between the poppet o-ring ...
2
votes
2answers
77 views

Nothing coming out of tap (ball lock corny keg)

I recently got a 5 gallon ball lock corny keg, but am having nothing but trouble with it. I was originally getting nothing but foam coming out of it, so I upgraded the liquid line from 5 feet to 10 ...
2
votes
5answers
119 views

Force-carbonated Homebrew Keg Foaming

I see there are other keg-foaming questions on here, but they seem to usually be related to commercial kegs or have answers that I've tried (hastily). I have a keg of homebrew brown ale and a brand ...
11
votes
3answers
4k views

Corny keg that won't hold pressure.

I have a corny keg that won't hold pressure unless it's kept at constant pressure at around 10 - 15 psi which apparently is enough to compress the seal against the opening of the keg enough to stop ...
1
vote
5answers
2k views

Kegging but without CO2 tank

I got an annoyance issue here. I have a Cornelius keg 19lt and 15-16 liter batch of Wit-beer almost ready to go, but poorly timed.Issue is I currently don't have the CO2 regulator or Tank. Reason for ...
1
vote
1answer
151 views

Will a pure co2 'welding' gas bottle be ok to use for my corny kegs?

I'm finding it hard to find affordable gas bottles in the UK. I've found a supplier that offer as they call it 'beverage' gas which consists of either 30/70 50/50 or 60/40 split of co2 and nitrogen ...
3
votes
1answer
160 views

How to choose a fridge to convert to a kegerator

I'm going to be building a kegerator pretty soon and I'm pretty sure that I am going to buy a new fridge. Now, I have 1 corny keg but in the future, I would like 4 kegs hooked up, my wife also would ...
1
vote
1answer
68 views

Racetrack or standard kegs?

I purchased a pair of ball lock corny kegs at a garage sale recently, and they are in great shape, although they're missing the top cap. Is there an easy way to tell whether they are standard or ...
1
vote
3answers
61 views

Pin lock dip tube requires multiple o-rings?

I use pin lock kegs, and until now all of them have been Firestone/Spartanburg. I recently received a Cornelius brand three-gallon pin lock keg. The post threads on this keg are different from all the ...
3
votes
2answers
236 views

Kegging with no fridge

I just got my first keg and am hoping to get on without forking out for a fridge as well. I probably should've asked this before investing in the keg, but here we are. Anyway, is it possible to ...
0
votes
1answer
123 views

Kegging process and serving PSI

I'm now the proud owner of a corny keg. I just have a couple of questions about carbonating the beer and then what to do during / after serving. As far as I'm aware, to carbonate the beer I just need ...
0
votes
1answer
280 views

Does anyone make low-profile ball lock disconnects?

Is there such a thing as low-profile gas/liquid disconnects for ball lock corny kegs? I'm curious if there's anything commercially available that is notably shorter in height than the typical black/...
0
votes
2answers
110 views

Additional equipment for cornelius kegging

My local supplier is selling refurbished cornelius kegs for a decent price and I would like to pick one up. I don't know the first thing about kegging though, and more importantly what additional ...
1
vote
1answer
66 views

kegging and carbonation

I am kegging my first batch ever in the next two weeks. It's a double IPA. My questions are: What pressure is ideal for serving. do i need to turn off my tank every night? Will leaving it on cause ...
3
votes
2answers
144 views

i want a keg cooler that is cheaper than kegerator

Looking into buying a 5 gal ball lock keg, i have the Co2 tanks, a tap, and gauges/hoses. I want to save by just purchasing something to keep it all cool. Strapped on cash at the moment but want to ...
3
votes
1answer
39 views

Leaky soda keg - has beer in it

I have a keg about 1/4 full of Black IPA (delicious) and I have been hooking up co2 when I want a pint of it, to save on co2 because there is a noticeable leak in the lid. I picked up some keg lube ...
0
votes
3answers
184 views

How to remove/service static relief valve on a pin lock keg?

i have a pin lock keg with a leaking static relief valve. The lid looks like this: I can't figure out how to remove the innards of the relief valve to fix it. Any ideas?
3
votes
1answer
72 views

Adding boiling wort on previous batches yeast sediments

I've been using kegs as fermentors and 'no chill' vessels. With pressurized fermentation I'm getting so much less sediment and krausen, and actually I purge the yeast before and after transfer, so ...
5
votes
2answers
2k views

How can I ferment in a corny keg under constant pressure?

I'm thinking about switching from fermenting (primary and secondary) in glass carboys to using Cornelius kegs. Specifically, I'd ferment a 5.5 gallon batch in a 10 gallon keg. My goal is to ferment ...
0
votes
1answer
252 views

What's under the keg rubber handles?

One of my kegs have a very brittle rubber handle. Them I realized that I don't know if it is just a rubber piece glued to the keg body or if there is any sort of metal underneath. If there is just a ...
3
votes
2answers
239 views

Spunding CO2 from 3 keg fermentors

I'm starting to ferment in kegs, and want to naturally carbonate my beers by using a spunding valve. My batches yield 3 kegs, and I'm already using a 4º keg to aerate them after no chill and after the ...
3
votes
1answer
155 views

Corny kegs: Is there a difference between the in coupler and the out coupler?

I have black and grey couplers, one says "in" and the other says "out", but they look exactly the same to me... Does it matter if I use them indiscriminately for gas in/beer out lines?
1
vote
2answers
181 views

Aerating no chill corny keg fermentors that don't seal

I'm very interested in ferment in corny-kegs after reading some questions about that here on this stackexchange. I will try it next batch, but there is a question about aeration/no chilling method: ...
1
vote
1answer
438 views

Gas In dip tube is missing in my corny-keg

I bought two used cornies. They're pin locks, and neither of them came with Gas tubes. Will everything still work? Or do I need to buy replacements?
2
votes
2answers
120 views

Half-size keg force carbonation

Today I have 1 half sized corny keg (11,4L - ~3gal) and want to force carbonate it. Normally when force carbonating normal sized cornys of 5 gal (19L) I use ~30 psi for about 10 minutes. Don't know ...
2
votes
3answers
254 views

How to fit kegging into a small house

We have a very tiny house. I brew in the garage and bottle there. I want to keg so bad but I am having trouble finding room for some kegs (in something to keep them cold). Anyone have some genius idea ...
2
votes
2answers
717 views

Is this pressure release valve missing a pull ring?

This photo shows the lid off a keg I purchased. I think it's a manual release valve, but all the manual one I've seen online have pull rings. As requested, here is a photo of the back. Will this work ...
1
vote
1answer
256 views

Can I use my CO2 regulator as a inside keg pressure checker?

If I force carbonate my keg, and after that I close my CO2 cilinder valve and plug my gas line into my gas in quick disconnect. Would this make my CO2 regulator to work as a spunding valve and let me ...
0
votes
2answers
191 views

What is the overall volume of a Corny keg?

Cornelius kegs come in various sizes, but many home brewers use the "five gallon" (nominal) size. Including the headspace, how much volume is available inside of the standard five gallon Cornelius ...
2
votes
3answers
319 views

'Auto-transfer' to secondary corny keg fermentors?

I've been reading some topics about corny-keg fermentors and became interested in that. So I was wondering: If I ferment in a sealed keg with the liquid side plugged into another keg, by its liquid ...
1
vote
2answers
79 views

Can I run a corny keg without liquid post?

So I was starting to setup a jockey box and cornelius pin-lock kegs to enjoy my last batch, when I noticed that I was without my pin lock liquid quick disconnect. Well, a friend brought one, and then ...
4
votes
2answers
301 views

How can one keg be overcarbonated on a 4-line setup when all the other beers pour just fine?

A while ago I purchased a 4-line kegerator, I have one CO2 tank that carbonates 4 kegs of beer at around 11 psi. When I bring a new uncarbonated keg online, I just add it to an empty gas line and let ...
9
votes
7answers
7k views

What's causing the recent spike in the price of used Corny kegs?

Used corny kegs came from the soda industry, but stocks seem to be drying up pretty quickly. Prices have gone up from $20 per reconditioned keg about 4 years ago to around $50 today (some are asking ...
3
votes
2answers
826 views

Do pin lock static relief valves need to be replaced after activation?

If the static relief valve on a pin lock keg has vented pressure (i.e at 130 psi) does the valve cease to work? Does it need to be replaced with a new static relief valve? Background: I was watching ...
1
vote
1answer
101 views

What should I expect to pay for pin lock Corny Kegs?

It seems like corny keg prices are all oer the map. doing a simple search for "used pin lock cornelius keg" I see them from $11.99 on ebay to $38.95 on Cornykeg.com That's a huge swing. Relatively ...
1
vote
1answer
2k views

What Beer Line or Hose Size Fits the Cornelius/Corny Keg Barbed Quick Disconnects?

I'm needing hoses to run to and from my barbed ball-lock quick disconnect on my cornelius keg. Which diameter should I be getting? Do I need reinforced hoses? Answer: 1/4" (6mm) Inner Diameter....
1
vote
1answer
2k views

Balancing: Correct Serving Pressure Vs Beer Line Length

How long should my beer lines be in my kegerator or keezer for the perfect pint?
1
vote
1answer
239 views

Clean kegged, put back together wrong

I recently brewed my second batch of 2x 5 gallon beers. The first time, kegs were recently reconditioned and so I did a quick clean and filled them up. This time, being some time later, I went ahead ...
1
vote
3answers
397 views

Rubber Keg Boot Glue Recommendation

I just bought two reconditioned 5 gal pin lock kegs. When I filled them up with hot water to clean them out I noticed that the rubber boot at the top of one of them was completely loose - it's only ...
0
votes
1answer
804 views

Kegerator Parts for Ball-lock kegs

I know the difference between ball-lock and pin-lock kegs. My question arises in the fact my kegerator is set up for a commercial keg and I need to convert it to fit my ball-lock keg. This is the ...
5
votes
2answers
546 views

White mold on my corney kegs?

Iv'e got a basic beer serving fridge out in the garage, just a few taps on the front and some bottles on the door. I'm developing a problem with what looks kinda like mold, I notice it mostly on the ...
4
votes
1answer
920 views

Corny keg fermentors

I had been thinking about using a couple corny kegs as fermentors. Maybe even trimming up some dip tubes to be able to CO2 push finished beer out of the kegs to clean serving kegs. Here are some of ...
1
vote
2answers
1k views

How to clean the CO2 line?

I had a tiny bit of backflow when I put the gasline back on the keg after force carbonation. It just flowed a tiny bit into the connector - nothing got inside the line itself. I read Backflow into ...
2
votes
2answers
2k views

Why did beer get into my gas lines from my corny keg?

I think I know the answer to this, but I'd like to see an answer listing more conclusively the different reasons why this happens. Some causes I've seen listed: High pressure plus shaking can cause ...
5
votes
3answers
2k views

Why is the pressure slowly decreasing when force carbonating a corny keg?

I just set up a new kegerator with a corny and 5 lb CO2 tank. I turned the tank on and at first I had a leak I could hear/feel, but I tightened everything and sprayed with starsan and don't see any ...
8
votes
3answers
1k views

Is there a quicker way to carbonate a corny keg?

Currently, if I want my beer "today" I put the gas into the out tube at the desired target pressure. I then rest the keg on my lap and gently rock it for about 20 mins, until I don't hear any more ...