Tagged Questions

The stage after primary fermentation where the beer is clarified, stabilized and matured. After conditioning, the beer is ready for packaging.

learn more… | top users | synonyms

0
votes
2answers
45 views

Maturation temperature (when SG stabilizes)

Some guys recommend to increase the temperature once the fermentation finished, and so, "start" the maturation in a higher temperature. Others say the inverse, to reduce the temperature. I already ...
0
votes
0answers
13 views

How long to mature and clear with Top Tap Barrel?

Once, initial and secondary fermentation are complete, how long should the barrel be left to clear and mature? I understand that with a bottom tap barrel you have to wait for the entire, barrel to ...
2
votes
2answers
85 views

Sediment in my bottles

How do I condition my lager so it minimal sedimentary deposits I am new to this and have tried only sugar
2
votes
3answers
191 views

Kegging Vs Bottling in regards to Conditioning

I recently started kegging, roughly 6 batches ago. Initially I would keg two batches and place them in the refridgerator, waiting two weeks for them to carbonate "naturally" (as opposed to "forced" ...
0
votes
2answers
46 views

Conditioning kegged carbonated beer

Is there any difference in conditioning beer in a force carbonated keg vs a secondary? This is under the assumption that both the keg and secondary hold ales and are sitting at about room ...
5
votes
2answers
464 views

After a beer reaches it's final gravity, how long does the conditioning step take?

I have been in the habit of leaving my beers in their primary fermenter for three weeks across the board, which is a significant amount of time longer than their primary fermentation usually takes. My ...
1
vote
1answer
155 views

Bottle conditioning

More reading - this time about bottle conditioning. If my yeast attenuation level is say 80%, does that mean there would be enough sugars in the bottle for the yeast to carb the beer? Or would priming ...
0
votes
0answers
34 views

Do I need a second vessel for conditioning/seconary fermentation of an ale? [duplicate]

I'm looking to brew my 1st batch, and trying to determine if I need to buy a carboy. From what I've read it looks like having using a second vessel for the conditioning phase increases the risk of ...
0
votes
2answers
125 views

Longer time on yeast for a bigger beer?

I ferment all my beers single stage in a glass carboy immersed in a water bath to maintain temperature. This is the first time I've made a bigger beer (this one started at 1.080) on this system. I ...
2
votes
2answers
2k views

Does temperature during bottle conditioning effect the flavour?

I made a Weis beer and my primary fermentation temp was 19C. After 2 weeks I mixed priming sugar into my beer and bottled it. I then conditioned the bottles for a week at 21C. I know when in primary ...
3
votes
2answers
374 views

What is the benefit of long fermentations/leaving beer on yeast for weeks?

I know the 'general' answers: "it allows the yeast to 'clean up' compounds", "it allows the beer to 'condition'", "it allows the flavors to come together", none of which I am satisfied with. My ...
1
vote
2answers
114 views

How foolish is it to try to make up for my tripel's shortish secondary by bottle conditioning it longer?

I'm attempting to brew a wide variety of beers (both 2.5 & 5 gallon batches depending on style) in a shortish time span in order to serve at a family reunion in the summer, and now it looks like I ...
2
votes
3answers
5k views

How long should I condition an IPA?

I boiled an IPA last weekend, and am getting ready to rack it to a secondary, for dry hopping. I understand the 1-2-3 rule (and follow it regularly, with good results). Is two weeks sufficient for ...
3
votes
1answer
86 views

Interruption of Lagering

Does an interruption in lagering, or swing in temperature effect a beer? My issue is, I only have one fridge available for lagering, which doubles as my fermentation fridge. Asked differently, if I ...
2
votes
2answers
3k views

Premature Kegging - leave batch in keg or rack to carboy?

I kegged a batch of hefeweizen on Sunday morning and force carbonated. My all-grain recipe was a combination of several that I found online, but largely an original creation. The plan was to leave the ...
3
votes
2answers
1k views

Corny Real Ale?

I am interested in learning some of the intricacies associated with 'real ale'. I realize that out in industry, this is done in large stainless steel (or aluminum?) barrels with special corks etc etc ...
1
vote
1answer
2k views

Temperature Swings While Bottle Conditioning/Carbonating

I brewed a GLBC Christmas Ale Clone in November, trying (futilely) to have it ready for Xmas Eve. Had it in bottles two weeks before, but to no avail. As this beer finished up around 9.3%abv, the ...
2
votes
1answer
852 views

How long should a Belgian Strong Dark Ale be aged?

How long should a clone of Gulden Draak be aged before comparing it to the real stuff? Our club is trying to get our clone recipe as close as possible, so want to tweak the recipe to get it closer to ...
4
votes
2answers
431 views

Is re-pitching essential after cold crashing?

If I'm cold crashing a batch to clear it up, is it essential to re-pitch when bottling or will there be sufficient residual yeast for carbonation?
6
votes
6answers
9k views

Is it possible to bottle condition without sediment?

I've recently been reading the labels a bit more on one of my favourite beers and have discovered that the brewers bottle condition their Pale Ale. Yet it's sold with no signs of any flocculated ...
4
votes
2answers
153 views

Covering your beer during conditioning…??

My first batch is conditioning at room temp right now. I used brown bottles, but threw in a few greens and two cleat just for experimentation..... I have them in a fairly dark room but also covered ...
5
votes
3answers
253 views

Beginner Conditioning Question

Probably a stupid question, but..... After I bottle and cap the beer do I store the beer in the fridge? Dark but No Fridge? I think I have done a decent job so far, and would hate to FUBAR everything ...
3
votes
7answers
2k views

first time racking and bottling…

Just wondering if you guys have any suggestions, tips or ideas? According to the directions in the kit I got you basically mix in the bottling sugars, bottle, cap and wait a few weeks. Basically I am ...
8
votes
1answer
750 views

Cold Conditioning in carboy vs keg

I have a wheat and a golden ale, both in 5 gal carboys, that have been in secondary fermentation for 2 weeks. I was planning on letting them settle for another week and then transferring them to kegs ...
3
votes
3answers
246 views

Any difference between lagering dubbel at 36F versus 45-50F?

I have a Belgian Dubbel bottle conditioning, the recipe for which came from Brewing Classic Styles. For this recipe, Jamil says to carbonate the beer, then lager for one month at 45-50F. I have the ...
3
votes
2answers
327 views

What is the impact of a second d-rest after 3 weeks of lagering?

We have brewed a number of ales, but recently tried our hand at a pilsner. After 8 days of fermenting at around 52 degrees F, we brought the pilsner up for a 2-day diacetyl rest at around 68 degrees. ...
6
votes
2answers
655 views

How long is too long to condition a beer in secondary without having to pitch bottling yeast?

How long is too long to condition a beer in secondary without having to pitch bottling yeast? What factors do I need to consider when deciding whether or not to pitch yeast at bottling?
7
votes
7answers
4k views

Should I shake bottles during conditioning?

I've got a batch of beer which was bottled last Saturday and a friend insisted I should shake them to assist in the conditioning. He couldn't offer any particular reason, so I was curious if/when it ...
15
votes
2answers
14k views

What is cold crashing?

What is cold crashing? When is it done? How long does it take? Best temperature to make it happen?
6
votes
2answers
127 views

Old Brown “sour belgian”

I have an Belgian sour that has been in it's secondary for 18 months. With a terminal gravity of 1010 for over the last year, what is the best way to bottle condition this beer? New yeast? Blend?
7
votes
3answers
350 views

Does krausening make for faster conditioning?

After reading this article on krausening, I began to wonder about using it to speed up the production of big beers. The article states that introducing fresh, active yeast will "clean up" the beer. ...
3
votes
2answers
705 views

cold conditioning saison then bottle conditioning

I brewed a high gravity (1080) saison and am planning on cold conditioning it in secondary at 32 degrees x 2 weeks, then bottle conditioning it. I am wonder will the cold conditioning make all my ...
3
votes
1answer
310 views

Secondary or Bottles

I currently have a stout (my 2nd home brew) in a secondary fermentor (glass carboy). Once it reaches FG, what are the advantages/disadvantages of leaving it in the secondary to condition vs bottling ...
8
votes
2answers
794 views

Keeping a bottle of no-rinse sanitiser

Some sanitisers, like star-san, chemipro oxi and betadine are no-rinse in certain dilutions. Star-san can additionaly be kept diluted in a bottle for months and used whenever one wishes. Can the same ...
3
votes
2answers
388 views

How does the carbonation method affect shelf life?

I've been reading some forums on probrewer.com, and there seems to be a consensus that bottle conditioned beer lasts longer than force carbonated beer. Why would that be?
3
votes
1answer
175 views

Basic information on priming

I'd appreciate a little input on "Priming": How do you do it? Which sugars do you use? Do you use it for all your beers and if not for which ones?
2
votes
2answers
4k views

Ale bottle conditioning temperature

For bottom-fermented beers the conditioning/storage temperature is crucial and supposed to be really low (32F / 0C). Is this the same for top-fermented beers or is conditioning / storage at higher ...
3
votes
3answers
484 views

Online retailers for brown nipper bottles (187 mL)?

I like using nipper bottles for high-alcohol brews as well using a few in each batch I bottle so I can test carbonation levels & flavors as the batch bottle conditions. So far, I've only had ...
6
votes
3answers
1k views

Thawing Frozen Beer

I have a couple kegs of beer that froze out in the garage this winter. What effects should I expect on flavor, head retention and body after thawing? My beer was relatively sediment free, but would ...
19
votes
7answers
7k views

Can I condition in growlers?

I read up a decent amount on conditioning in growlers before attempting it. I wanted to share my experience and see if others had had similar experiences. The thinking, of course, is to minimize ...
5
votes
3answers
238 views

What about opened LME cans?

Most LME come in 3 pound cans, which is a quite large quantity if you want to add just a little to your wort, just one pound for example. It's a shame to throw away the rest. If I open a LME can and ...
11
votes
6answers
5k views

Alternatives for priming sugar

If you happen to be out of priming sugar, but really want to bottle your beer, what are the alternatives? Let's assume a 5 gallon batch that's fully fermented - call it 1.010-1.014.