I'm completely new to this, so I don't know if I'm doing something dumb or my regulator is broken. Here's what I'm doing: Here's what I'm doing: I connected this regulator to a 5 lb. CO2 cylinder. ...
I'm building a spunding valve and can't locate an adapter from female flare to male pipe thread. Until I can, I'm planning on using reinforced PVC tubing to connect the valve/gauge assembly to the gas ...
I just set up a new kegerator with a corny and 5 lb CO2 tank. I turned the tank on and at first I had a leak I could hear/feel, but I tightened everything and sprayed with starsan and don't see any ...
I have just kegged my beer and connected the regulator to the CO2 supply. I turn it on and I get no pressure. On my regulator the needle has moved up to the top of the "buy more" zone, but on the ...