The cleaning tag has no wiki summary.
14
votes
3answers
739 views
My keg is empty. Now what?
So I kicked my first Corny keg and need to get the keg and the system cleaned and ready for another batch, which might not be ready for some time. What's my process here?
13
votes
3answers
3k views
What is the difference between Clean, Sanitized and Sterilized?
What is the difference between
Clean,
Sanitized and
Sterilized?
12
votes
4answers
5k views
Can OxiClean be used as a sanitizer?
Many batches ago I abandoned the sanitizing solutions sold (at ridiculous markups) from standard homebrew stores in favor of OxiClean Free. My logic at the time (being out of sanitizer, and at a ...
11
votes
4answers
188 views
Methods for cleaning and drying tubing
Brewing 5 gallon batches at home.
During the transfer from my primary fermenter to the secondary, and when filling bottles from my bottling bucket I constantly need to use plastic tubing to transfer ...
9
votes
7answers
730 views
Are bottle brushes necessary?
I've always bottled my beers (haven't invested in a kegging setup yet), and I've never once used a bottle brush. I simply soak my bottles in OxyClean to clean them, give them a shake, then rinse, ...
9
votes
4answers
1k views
Can I use a dishwasher that has rinse agent to sanitize my bottles?
My dishwasher has a built in rinse agent dispenser that it claims must be filled for every use, besides I have no clue how to empty it once it is filled. Can I still run my bottles in the dishwasher ...
8
votes
2answers
1k views
Cleaning difficult krausen ring off Better Bottle
My latest brew has left a ring from the krausen just past the neck of my Better Bottle. I am on my third soak with a little bleach and warm water. Usually this does the trick, but I'm almost thinking ...
8
votes
4answers
657 views
Is it safe to use swing-tops?
I just started brewing my first batch (yay!) and want to set up for bottling while I wait. My question is simple: Can I start using Swing-Tops like Grolsch to bottle my beer?
I've heard varying ...
8
votes
3answers
526 views
Is There A Way To Get Root Beer Taste/Smell Out Of Kegging Equipment?
I've since learned better, but when I first got my kegging setup, I put root beer on one of the lines. After that keg was empty, I decided to put soda water in instead. Unfortunately, the root beer ...
7
votes
2answers
664 views
How do I clean a 5 gallon root beer keg?
I was given a pair of Virgils kegs with root beer still in them, and I've been wanting to use them for homebrewing. I was at a brewery tour a little while ago and I was told that it's nearly ...
7
votes
3answers
314 views
cleaning copper
Copper is great for all sorts of things, manifolds for your cooler based mashing tun, as well as that wort chiller you can't live without. However, copper gets really dirty, really quickly, and I ...
7
votes
7answers
1k views
Cleaning bottles - What's a good cleaning agent?
At this point I am using regular dishwashing liquid for cleaning my bottles. This is not perfect, I know and I think, I am seeing a detrimental effect on the foam, but I do not know a good ...
7
votes
1answer
367 views
What cleaners can I use for Kegs?
I'm new to kegging, but I was made aware that I shouldn't use sodium metabisulfite when cleaning a keg.
So what cleaners can I use?
More specifically, can I use OxyClean or Diversol?
7
votes
2answers
528 views
Keeping a bottle of no-rinse sanitiser
Some sanitisers, like star-san, chemipro oxi and betadine are no-rinse in certain dilutions. Star-san can additionaly be kept diluted in a bottle for months and used whenever one wishes. Can the same ...
7
votes
2answers
429 views
How difficult are the plate-based wort chiilers to clean? Do they require filtration before the wort goes through them?
I'm considering getting one of those "Therminator" style wort chillers as an upgrade to the coil. I plan on gravity feeding the wort through and pumping back into the kettle until my wort is nice and ...
6
votes
3answers
351 views
cleaning vs. sanitizing
I have made over 50 batches of homebrew, and I have a confession: I rarely CLEAN my equipment. I take a quick look to see if there is any visible debris/dust, etc., and if so, I will spot clean it or ...
6
votes
3answers
268 views
Spotless Carboys
I've acquired a handful of different size carboys over the years and all of them are serviceable, but one has some deposits/staining inside. It's near the top of the vessel, a few inches down from ...
6
votes
3answers
768 views
How to clean grain bags?
I did a partial mash tonight, and I want to reuse my grain bag for future uses. I tried to rinse it out, but pieces of grain are still in there. What do you guys do to clean it out fully? Throw it in ...
6
votes
1answer
668 views
What do I need to refurbish a corny keg?
What do I need to prepare a used corny keg (picked up at a flea market say) for brewing?
Should I replace the seals?
Do I need a special tool to remove the posts?
What products and techniques ...
5
votes
6answers
568 views
5
votes
2answers
113 views
Necessary to clean bottle tree?
So I recently purchased a bottle tree (not sure how I went so long without one) for drying/storing my sanitized bottles. Is it is overkill to sanitize the bottle tree in sanitizing solution as well?
...
5
votes
2answers
128 views
White mold on my corney kegs?
Iv'e got a basic beer serving fridge out in the garage, just a few taps on the front and some bottles on the door. I'm developing a problem with what looks kinda like mold, I notice it mostly on the ...
5
votes
3answers
3k views
How do you clean and fill a keg manually?
What equipment is required to clean and fill a commercial keg (not one adapted for homebrewing), before paying for a full blown keg washer and filler? Is this even possible?
5
votes
1answer
659 views
Are One-Step and OxyClean the same thing?
They're both perchlorate-based cleaners. I was thinking of buying some OxyClean when I ran out of One-Step and my LHBS only carried PBW and StarSan, but One-Step has worked so well for me that I ...
5
votes
1answer
111 views
How do I clean a sankey pump?
What is the best way to clean a sankey pump it after I use it so it doesn't get moldy inside?
5
votes
1answer
323 views
How can I prevent haze from forming on the inside of vinyl tubing when cleaning in Oxy-Clean?
I've been cleaning my carboys with oxy-clean and it works wonders...no need to even brush (which is important if you're using the plastic 'Better Bottles').
So I decided to throw all my vinyl tubes ...
4
votes
4answers
159 views
Would placing the fermenter tank in a tub of water be a good way to handle hot environments?
Summers where I live typically have 80F nights and it can easily pick up to 95 degrees during the day.
I have a plastic trash can (which I bought for this purpose) that I have filled up with water. ...
4
votes
3answers
552 views
Recycling/Reusing Bottles?
Are Glass Beer Bottles safe to recycle/reuse? Since I can't know who drank out of it and what could be in it, I want to be sure that this is safe to do.
What type of disinfection reagent would I use, ...
4
votes
4answers
187 views
How to clean the inside of a blowoff hose
I soaked my blowoff hose in PBW for an hour or so, then rinsed and let dry. There is still light amounts of residue visible. The only brush I own is a carboy brush which I don't think will fit ...
3
votes
3answers
571 views
What amounts and times should I use to clean/sterilize my brewing equipment?
There are actually 2 questions here. The first one is more of an opinion (although I would like to know), but the correct answer will only be awarded for the second question.
I have been researching ...
3
votes
2answers
162 views
Rust in a plastic fermenter?
I've got a 6 gallon plastic fermenter - one of those food-grade plastic buckets Midwest gives you in the starter kit. I guess after our last brew, my brother and I carelessly tossed the remains of our ...
3
votes
3answers
77 views
How to clean my my stove top?
Just finished cooking up my first batch of home brew, and during the boil I boiled over just a little bit. Now there's this dark black burned stuff all over my stove that does not want to come off. ...
2
votes
4answers
1k views
How can I clean an old carboy?
I received a 5 gallon carboy that I want to use but it has some crud in the curve of the bottle. What's the best way to clean this off?
2
votes
3answers
398 views
Deep cleaning equipment after “brett” contamination
A Few Contaminated Batches
Although most of my beers have been coming out 'clean', I've had a couple of my beers show up with what I think might be bretanomyaces or some other 'bug'. The ...
2
votes
3answers
246 views
Cleaning & sanitizing NPT and weldless fittings
I just got a new boil kettle with a stainless ball valve attached with a weldless bulkhead fitting, and a stainless barb connected to the NPT outlet of the ball valve.
What's the cleaning procedure ...
2
votes
3answers
227 views
How can I tell there is mold in my bottles?
I just got my kit and am about to brew for the first time.
I was warned to not use bottles that have sat out uncleaned because there can be mold in them.
How can I tell if there is mold in my ...
2
votes
2answers
109 views
Cleaning up the sweat & flux
What is a effective way to clean the inside of copper fittings after sweating them together?
[Edit: eye candy]
See here for eye-candy.
1
vote
2answers
122 views
What are some effective, cheap, easy ways to clean and re-use bottles?
After a couple year hiatus from home brewing, I'm ready to get back into it and I have been diligently consuming some local microbrews and saving the bottles in preparation. When I brewed before, for ...
1
vote
1answer
421 views
Is iodophor ideal for rinse-less sanitization before bottling?
I was talking to a friend today and complainIng about the clean/bleach/sanitize/rinse process I undergo when bottling. He dug a bottle of iodophor out of a back shelf and asked me to try it out. He ...
1
vote
2answers
155 views
How to clean the CO2 line?
I had a tiny bit of backflow when I put the gasline back on the keg after force carbonation. It just flowed a tiny bit into the connector - nothing got inside the line itself.
I read Backflow into ...
1
vote
1answer
121 views
Is Oxiclean Free OK to use on a metal brewpot
Is it safe to use Oxiclean Free on a metal brew pot? I know that rinsing thoroughly is required after using Oxiclean Free. Is it safe to let the brew pot sit in an Oxiclean Free solution overnight?
0
votes
2answers
189 views
Tips on Using Easy Clean
I got a beer kit and it came with Easy Clean from LD Carlson. At first I was under the impression that I could use it to clean and sanitize. But now I'm not so sure. It looks like it was good for ...
0
votes
4answers
160 views
Cleaning Fermenter [duplicate]
Possible Duplicate:
Cleaning difficult krausen ring off Better Bottle
I just finished my first batch of beer from a Brooklyn Brew Kit, and noticed a film in my fermenter. This film is ...
0
votes
1answer
233 views
Can't get my glass carboys completely clean
I've been relatively active on homebrewtalk.com, have read the cleaning chapter of How to Brew half a dozen times, and watched the instructional video that came with my kit on how to clean carboys. I ...
