Carbonation refers to dissolved carbon dioxide (CO2) in beer, wine or soda. The container holding the liquid is held under pressure like in a keg or bottle. When the pressure is reduced, the carbon dioxide is released from the beverage as small bubbles.

learn more… | top users | synonyms

19
votes
7answers
7k views

Can I condition in growlers?

I read up a decent amount on conditioning in growlers before attempting it. I wanted to share my experience and see if others had had similar experiences. The thinking, of course, is to minimize ...
18
votes
6answers
7k views

Is there anyway to tell if a glass bottle of beer is carbonated without opening it?

It would be great if I didn't have to ruin a bottle of beer by opening it to test to see if it carbonated. Is there any way to tell?
14
votes
4answers
4k views

How can I avoid a lot of foam in the first pint from the keg?

Whenever I go to get a pint from the keg, the first pint is always foamy. I have to fill the glass up about 1/3 of the way and dump it out, just to the pour actual beer. I usually carbonate by ...
12
votes
3answers
26k views

Carbonation Drops vs. Sugar?

I'm brewing my very first batch with an actual kit (I've used Mr. Beer before with decent results and wanted to do it right). I bought a recipe kit from Northern Brewer and I opted for the Cooper's ...
11
votes
3answers
802 views

Is there a way to use my kegging system to carbonate beer for bottling without a beer gun?

The only solutions I've found are expensive, and involved a pricey piece of equipment called a beer gun. Is there a way to carbonate my beer before bottling so I can ensure a good carbonation?
10
votes
3answers
2k views

Can I add some water before I bottle?

I'm in the final stages of my very first beer, which is a Belgian wit. Everything has gone great so far, and I will be bottling in just a few days. I have a pretty high alcohol content (around 8.2%, ...
9
votes
5answers
3k views

How to get the carbonation right in bottled beer

I am really struggling to get the carbonation of my beers right. They either seem to turn out too flat or too carbonated. I take care in calculating the correct amount of bottling sugar for the beer ...
9
votes
3answers
1k views

Over-carbonating in the bottle

I've had a few batches get a little too carbonated in the bottle. Currently, I have a delicious stout that fills two glasses on pour, and needs some time to settle down. That is, of course, if you ...
9
votes
3answers
2k views

High-gravity beer stored too cold to carbonate during bottle conditioning. How can I carbonate this beer?

I made a strong scotch ale. Bottled it up, 2 weeks later no carbonation. Is there a way to save this batch? OG 1.095, Used Safale US-05, 2 weeks in primary, 6 weeks in secondary, FG 1.030, I ...
9
votes
1answer
2k views

Massively Over-Carbonated Beer…What Do I Do?

Okay, so I made a mental error tonight when I was bottling and put 5 gallons worth of dried malt extract into 2 gallons of wort. I didn't realize the mistake until I had everything bottled. So now ...
9
votes
1answer
750 views

How long does 5lb of C02 last you?

I can never get a grip on how often I'll need to refill my C02. Sometimes it seems to last forever other times it seems very quick. In general, if you are just using C02 to pour, how many soda kegs ...
8
votes
6answers
10k views

Bottles didn't carbonate, anything I can do?

Brewed an Oatmeal Stout and it has been in bottles for about 4 weeks now and still the bottles haven't carbonated. Tried the first bottle after 2 weeks and it was very flat. Now I just opened one ...
8
votes
4answers
5k views

How full can I fill my bottles?

My first few batches of beer have come out quite undercarbonated. I believe because I've been quite cautious about how far I fill my bottles up. This comment backs up my theory. How can I determine ...
8
votes
4answers
2k views

Will force-carbonated beer remain carbonated if poured into a bottle and capped?

If I pour kegged beer into bottles and immediately cap them to take with me for the evening, will it remain well-carbonated?
8
votes
3answers
1k views

Is there a quicker way to carbonate a corny keg?

Currently, if I want my beer "today" I put the gas into the out tube at the desired target pressure. I then rest the keg on my lap and gently rock it for about 20 mins, until I don't hear any more ...
8
votes
2answers
637 views

What is the danger zone for overcarbonating and making bottle bombs?

Just curious how many volumes of CO2 most average beer bottles can hold. Is there a rough number where alarms should start going off? Update -- I'm seeing in different carbonation calculators that ...
8
votes
2answers
325 views

Does a given pressure and temperature determine the number of volumes of CO2?

I have seen "force carbonation tables" used by folks who use keg systems. They apply the tables to getting CO2 forced into a beer, and have an ending number of CO2 volumes in mind, then set the ...
8
votes
5answers
2k views

How can I fill bottles from a keg and maintain pressure

I've been kegging for awhile now, but I still haven't managed to successfully fill bottles from my kegs without losing all pressure. I don't have a counter pressure beer filler or a Blichmann Beer ...
8
votes
3answers
991 views

Three-finger head but tastes flat?

I recently brewed a Belgian Wit extract kit. Bottle conditioned with 5 oz of priming sugar. I'm pretty happy with the taste. With a medium speed pour into a Pilsner glass, the beer develops a ...
7
votes
4answers
8k views

Why is our beer not carbonating?

We've made a few batches of beer and our recent batches have not ended up as carbonated as previous. I think the beer has been stored in a cooler place but I'm wondering if that is the only reason. ...
7
votes
4answers
3k views

Dry Hop Filtering and bottling

This is my first attempt at dry hopping. I added hop pellets directly into the secondary fermenter. They have been in for 1 week and many have settled to the bottom, however there is quite a bit ...
7
votes
2answers
658 views

Does carbonation method impact beer flavor?

Does the method chosen to carbonate your beer impact taste? For example, forced Co2 vs bottle vs natural, etc.
7
votes
2answers
3k views

How to troubleshoot flat beer?

Since I started brewing in January, every single batch (6 so far) has come out flat. I've had a couple come good after a few months in the back of the garage but for the most part, it's all flat. At ...
6
votes
5answers
2k views

How do I carbonate without yeast or a keg?

I am brewing a batch of Hard Lemonade. The gravity started at 1.090 in mid September 2011. I pitched Lalvin EC-1118 as the yeast. It is now down to 1.029 and tastes good and is sweet. If I bottle and ...
6
votes
5answers
25k views

How long do I need to carbonate a keg?

I've recently inherited a keg system from a friend moving interstate and have just dropped my first batch into the keg. I found this chart from a link here that shows CO2 units by pressure & ...
6
votes
3answers
1k views

How can I make sure my bottle cap is sealed tightly?

I have concerns over why our beers are not carbonating properly. One suggestion was to check and make sure the bottles are sealed properly. What might be a good way to do this?
6
votes
2answers
3k views

Beer not carbonating

The IPA I made has been sitting in bottles for 2 weeks around 73-75F and is not carbonating. One thing I did prior to bottling was I cold crashed the secondary for about 1 day to get some floating ...
6
votes
3answers
8k views

Using a carbonation stone to force carbonate in corny kegs

Can anyone tell me how to properly use a carbonation stone to carbonate beer in a corny keg? Particulary how to attach the stone and if it is removed after full carbonation or left in place until the ...
6
votes
2answers
725 views

Can I use fructose as a priming sugar and how much should I use?

OK, so I was in the health food shop (again) and couldn't find any corn sugar. However, on a whim I bought some fructose. I am thinking of using it for priming the English ale I have pencilled in to ...
6
votes
2answers
4k views

No carbonation in the bottles?

Had to recap my bottles to fill the level up so I didn't have any explode on me. Now they have been sitting for 2 1/2 weeks. Opened one up and there is no carbonation.. is there a way to recarbonate ...
6
votes
1answer
339 views

Does irish moss affect the amount of yeast left at bottling?

I made a brown ale kit and used irish moss in it for the first time. After putting it in I realized that I had misunderstood my LHBS and added 1 tablespoon instead of one teaspoon. I left in primary ...
6
votes
2answers
392 views

Should a wine be encouraged to emit residual CO2 before bottlings?

When making beer or other carbonated beverages, we are encouraged to consider residual CO2 when calculating priming sugar. Does this also mean that non-carbonated beverages should be "encouraged" to ...
6
votes
1answer
124 views

Why is less bottling sugar required when naturally carbonating in a keg versus bottles?

When I look at various carbonation tools, I noticed that the amount of bottling sugar was MUCH reduced when naturally carbonating in a keg: It would seem to me that a certain amount of sugar would ...
5
votes
5answers
9k views

Under-carbonated bottled beer

I just opened up a couple bottles of a brown ale I just brewed, and there is much less carbonation then I had hoped. The beer was in the primary for a week, secondary for 3 weeks, then primed and ...
5
votes
4answers
5k views

How long will carbonation “hold” in a growler?

I purchased a commercially filled growler today, and it doesn't appear to have the plastic "growler" lid that I usually get when getting one filled at a taproom or beer store. It has a thin metal ...
5
votes
6answers
1k views

Force “bubblifying” with something other than CO2

I know some people make nitro stouts, but has anybody ever heard of a "whipped cream" stout using nitrous rather than nitro? I think this could be tasty, but I'm not sure of the legality or ...
5
votes
2answers
561 views

Keg/CO2 question as I think about moving to kegging

This is probably a foolish one, but... So you can force carbonate with a keg (or sugar carbonate, but of course why would you), and then serve from the keg with the CO2 to help dispense. But, if ...
5
votes
4answers
2k views

Batch carbonation vs bottle carbonation

I was reading online some suggestions to carbonate the batch of beer before bottling, and would like to get some details on quantities and method. I do love my home brewed beer, but I don't like the ...
5
votes
3answers
838 views

Can I naturally carbonate a sweet hard lemonade?

I'm thinking of brewing some hard lemonade, and from what I've read, I'll need to neutralize the yeast with sulfites if I want to prevent it from getting too dry. Will I need to force carbonate after ...
5
votes
5answers
1k views

Can a beer be carbonated during primary or secondary fermentation?

Is it always necessary to carbonate your beer with sugar or tablets or is it possible to get the right amount of carbonation with the primary and secondary fermentation?
5
votes
1answer
491 views

Any need to stop yeast before kegging?

I'm brewing to keg for the first time, finally. I am planning to force carbonate and was wondering: Are there was any steps I need to take to stop any active yeast before putting it in the keg and ...
5
votes
3answers
1k views

Why is the pressure slowly decreasing when force carbonating a corny keg?

I just set up a new kegerator with a corny and 5 lb CO2 tank. I turned the tank on and at first I had a leak I could hear/feel, but I tightened everything and sprayed with starsan and don't see any ...
5
votes
2answers
201 views

Dispensing beers at two different pressures?

I'm working on getting a dual-tap kegerator. Is it worth it to pay the extra to dispense two beers at two different pressures? I can see dispensing a low-carbonation ESB and a high-carbonation ...
5
votes
3answers
2k views

What's the best/safest way to handle likely bottle bombs?

I'm using 16oz amber e-z cap bottles (swing tops). I've read that they'll self-vent before exploding, but I've heard other accounts of them actually exploding. I'm storing them like this and it's ...
5
votes
0answers
192 views

Bottle-priming post secondary fining? [duplicate]

Possible Duplicate: Cold Crash and Finings As mentioned in this question, I'm anticipating some trouble with a low-flocculating yeast, and one of the suggestions was to use gelatin for ...
4
votes
6answers
732 views

Flat beer with table sugar?

I brewed this Ale Oktoberfest beer and I thought everything went perfectly, but the bottles are flat (have tried 4 of them) Some details: 2 weeks in the primary 1 week in secondary (5 gal carboy) ...
4
votes
3answers
1k views

How Long Will a Keg Hold Carbonation if Disconnected from the CO2 Tank?

How long will a keg hold carbonation if it is disconnected from the CO2 tank? Does the type of keg matter?
4
votes
1answer
68 views

How can I prime by taking the gravity of the priming fluid?

I have this great mulberry syrup I found. I want to prime with it, and I forget how to figure this out with an unknown sugar source. I see that John Palmer's "How to Brew" references measuring the ...
4
votes
1answer
149 views

no carbonation and a few bottle-bombs

I bottled about a month and a half ago. Every bottle I tried has had no carbonation. But I just opened up a bottle and it was over carbonated, and it almost exploded out of the bottle. I had this ...
4
votes
4answers
2k views

Relation of CO2/alcohol/yeasts in Ginger Beer

The article making_ginger_beer mentions using bread yeast so you get more carbonation and less alcohol. Isn't carbonation a by-product of the process that makes alcohol? Wouldn't that mean more ...