The process of moving beer or wine in to bottles and sealing them for later consumption.

learn more… | top users | synonyms

5
votes
1answer
227 views

Should Priming Sugar Solution Have Minimal Oxygen?

When I bottle, I follow the typical step of boiling some water, adding bottling sugar, letting it cool, and adding it to the beer that's done fermenting (but still of course has live yeast floating ...
11
votes
3answers
787 views

Is there a way to use my kegging system to carbonate beer for bottling without a beer gun?

The only solutions I've found are expensive, and involved a pricey piece of equipment called a beer gun. Is there a way to carbonate my beer before bottling so I can ensure a good carbonation?
13
votes
8answers
11k views

Am I required to refrigerate bottles after bottling?

My instructions that came with my kit said that I should let the bottles sit for 3 days, then age in the fridge for 10 days. If I don't refrigerate, will I get bottle bombs? Advice on forums and ...
4
votes
3answers
207 views

Referment after Adding Priming Sugar

So I accidentally grabbed the wrong fermenting carboy today, this one started fermenting 3 days ago, but already has a gravity of 1.010 (it got a little warm up to 78F). Before we noticed it was the ...
4
votes
2answers
3k views

Can I use a Growler at bottling time and how long will the beer last in this.

I had a growler from a local brewery and filled it at bottling time. I made sure I sanatized the bottle and top. I did this to take a sample test before the three weeks of bottle time. Is this OK and ...
5
votes
4answers
713 views

Can I top off my batch at bottling time with water?

I noticed my batch in the secondary looks short of 5 gallons, can I top it off with water when I bottle?
8
votes
3answers
629 views

Is there an optimal bottle size?

I am approaching bottling time for my "ordinary" bitter and was wondering, does bottle size (i.e. volume) have any appreciable effect on the final beer? I have been working hard collecting ...
4
votes
4answers
412 views

Bottling in Jerry Cans

I tend to make more alcoholic ginger beer than i can bottle. Im tempted to buy a few JerryCans and use them instead of bottles. Do you think they would withstand the pressure? Has anyone else had any ...
8
votes
1answer
3k views

Can I keep mead/wine in stainless steel bottles?

So what do you use for bottling? I'm really starting to look into stainless steel bottles. There are companies that make them (with customized artwork, no less) for conference shwag but you could ...
12
votes
2answers
685 views

Is a taste-test at bottling time indicative of the end result?

If I were to do a taste-test of the beer at racking/bottling time, how indicative of the end result would it be?
3
votes
2answers
596 views

Bottling and Caps are loose

my first attempt at brewing is going well. Everything was going well, I went to check the amount of sediment in the bottles beer. With a gentle turn, the beer was leaking out the top. I noticed this ...
5
votes
2answers
398 views

bottle filling without a rapid bottler

I'm about to bottle my first coopers home brew and i dont have a rapid bottler. Can I pour it straight from the tap or will I have problems?
8
votes
4answers
5k views

How full can I fill my bottles?

My first few batches of beer have come out quite undercarbonated. I believe because I've been quite cautious about how far I fill my bottles up. This comment backs up my theory. How can I determine ...
6
votes
2answers
4k views

No carbonation in the bottles?

Had to recap my bottles to fill the level up so I didn't have any explode on me. Now they have been sitting for 2 1/2 weeks. Opened one up and there is no carbonation.. is there a way to recarbonate ...
13
votes
3answers
6k views

How long will bottled beer last?

How long will bottled beer last without refrigeration?
3
votes
1answer
275 views

recapping my bottles? Will it ruin the outcome of my beer?

I bottled my first batch of homebrew and didnt fill the bottles all the way. So the next day I opened the bottles and poured some more beer into them and recapped them.. I this going to mess up the ...
7
votes
4answers
3k views

Dry Hop Filtering and bottling

This is my first attempt at dry hopping. I added hop pellets directly into the secondary fermenter. They have been in for 1 week and many have settled to the bottom, however there is quite a bit ...
5
votes
1answer
2k views

What is the white film on my beer in my bottles?

I brewed a double batch of IPA with a buddy about 8 weeks ago. We split this into two 5 gallon pails and 2 weeks later into two carboys. His was fine, but mine developed a bit of white stuff on ...
4
votes
3answers
865 views

Can I bottle ale after 2 weeks in keg?

I've primary fermented my Woodfordes Admiral Reserve for 4 days, kegged with 3oz if sugar and it's now it's been in there a week. I don't want sediment in my beer. Can I bottle it after 2 weeks in the ...
5
votes
1answer
2k views

How can I bottle using corks?

After downing a bottle of Saison Dupont last night and wishing to re-use the bottle, I wondered if any home brewers have "capped" their brews using corks? The bottle looks like it might be re-usable ...
4
votes
2answers
438 views

Off-flavors from bottle conditioning, but not kegging

I have brewed some 20l batches where I have kegged half in a 9l corny keg, and bottled the rest with sugar for priming (plain white sucrose). In a couple of these batches the kegged beer has been ...
10
votes
3answers
2k views

Can I add some water before I bottle?

I'm in the final stages of my very first beer, which is a Belgian wit. Everything has gone great so far, and I will be bottling in just a few days. I have a pretty high alcohol content (around 8.2%, ...
4
votes
2answers
152 views

Benefit to smaller bottles?

Im about to bottle my first 5 gal batch that i have made in a while, and am considering buying some 22oz bottles to try to reduce the amount of time i spend cleaning bottles, but am wondering if the ...
3
votes
2answers
827 views

Why is some of my beer flat (half of the bottles in one of 2 batches done together)?

I brewed and subsequently bottled 2 batches of beer together, following much the same process for cleaning/sanitizing and brewing throughout. When bottling, I bulk primed both batches with a sugar ...
4
votes
1answer
425 views

Lager Bottling Temperature

I've got a lager that's been in my garage for the last month (generally hovering between 30 and 36F), and I saw a question relating to temperatures for bottle conditioning a lager, but I'm wondering ...
5
votes
2answers
306 views

What are the steps in recapping overcarbonated beer?

What are the steps involved in recapping a bottle of beer for any reason (e.g. if too much priming sugar is added, if a cap appears to be defective or failing, etc)?
8
votes
2answers
630 views

What is the danger zone for overcarbonating and making bottle bombs?

Just curious how many volumes of CO2 most average beer bottles can hold. Is there a rough number where alarms should start going off? Update -- I'm seeing in different carbonation calculators that ...
12
votes
3answers
25k views

Carbonation Drops vs. Sugar?

I'm brewing my very first batch with an actual kit (I've used Mr. Beer before with decent results and wanted to do it right). I bought a recipe kit from Northern Brewer and I opted for the Cooper's ...
8
votes
5answers
3k views

Boiling bottle caps

I've always soaked my bottle caps in sanitizer before using, but a friend of mine suggested boiling (throw in the same pot with priming sugar) instead because the cooties can theoretically hide from ...
6
votes
2answers
650 views

How long is too long to condition a beer in secondary without having to pitch bottling yeast?

How long is too long to condition a beer in secondary without having to pitch bottling yeast? What factors do I need to consider when deciding whether or not to pitch yeast at bottling?
18
votes
6answers
7k views

Is there anyway to tell if a glass bottle of beer is carbonated without opening it?

It would be great if I didn't have to ruin a bottle of beer by opening it to test to see if it carbonated. Is there any way to tell?
3
votes
3answers
541 views

Add finings to beer to be bottled?

I've got a chocolate stout fermenting at the moment, and I'd like to add finings to this once fermentation is complete. I haven't done this before, so wondering what the best method is? I'll be ...
2
votes
4answers
420 views

Glass Milk bottles?

Just about to start up my next batch and noticed I hac a couple glass milk bottles from Whole Foods lying around. In what ways could they be put to-use in homebrewing? Fermenting a test? Mead? Cider? ...
10
votes
3answers
4k views

Why my homebrewed lager beer bottles explode?

I started home-brewing lager beer last year. I am using ready-kits and the first three times it went quite well. Now, with the latest, I had a very strange problem. A couple of weeks after I bottled ...
12
votes
1answer
1k views

Do Oxygen Absorbing Caps Make Any Difference

So, I was looking to refill my supply of bottle caps and ran across "Oxygen Absorbing" bottle caps. The implication is that their absorbency will reduce oxidation in the bottled beer. If you're ...
9
votes
4answers
1k views

Permanent Bottle Labels

I'm considering making permanent labels for my bottles. I've had a friend create a label design with a blank banner in the center. My idea is to have the design printed on vinyl stickers and then ...
6
votes
3answers
972 views

How can I make sure my bottle cap is sealed tightly?

I have concerns over why our beers are not carbonating properly. One suggestion was to check and make sure the bottles are sealed properly. What might be a good way to do this?
4
votes
2answers
760 views

What kind of paper should I use for bottle labels?

Do I need to use heavier paper (ie, 30 lb) for labels? Would regular printer paper work just as well?
4
votes
2answers
727 views

How can I prime for bottle conditioning without oxidizing the beer?

I'm probably being too paranoid here, but what's the best way to make sure the priming sugar (I tend to use corn sugar boiled in a few cups of water for 5 minutes and then cooled) is thoroughly mixed ...
9
votes
6answers
5k views

Reusing twist-off bottles

I've heard it said that twist-off bottles should be avoided when reusing bottles for homebrewing. I've also heard a few people saying they've used plenty of them with no ill effects. Given that (at ...
8
votes
5answers
2k views

How can I fill bottles from a keg and maintain pressure

I've been kegging for awhile now, but I still haven't managed to successfully fill bottles from my kegs without losing all pressure. I don't have a counter pressure beer filler or a Blichmann Beer ...
10
votes
7answers
1k views

Are bottle brushes necessary?

I've always bottled my beers (haven't invested in a kegging setup yet), and I've never once used a bottle brush. I simply soak my bottles in OxyClean to clean them, give them a shake, then rinse, ...
25
votes
16answers
10k views

Are there any tricks for removing labels from bottles?

Some labels can be a pain to remove. I've tried soaking bottles in water with a little bit of dish soap but it doesn't really do much to break down the adhesive. What methods do you have for easily ...
6
votes
2answers
127 views

Old Brown “sour belgian”

I have an Belgian sour that has been in it's secondary for 18 months. With a terminal gravity of 1010 for over the last year, what is the best way to bottle condition this beer? New yeast? Blend?
4
votes
1answer
895 views

Growlers v 12oz Bottles

As an about to brew newbie who foundly remembers his grandfathers home brew bubbling away back in th e late 50's & 60's when iy was actually (still) illegal) in 20g ceramic crock (w/nothing but ...
3
votes
1answer
754 views

Is my lager done fermenting? More yeast?

I put my lager in the primary fermenter roughly 30 days ago. The original gravity was around 1.060 and 5 days ago when I took a reading it was at about 1.013. Today it's at 1.012 - so it doesn't ...
2
votes
3answers
467 views

Heinken bottles.

Has anyone used these bottles and recaped them with home brew? Not sure if they use twist off caps or the regular pry-offs.
4
votes
1answer
1k views

What “problems” can I have if I bottle just one week fermented beer?

last Saturday (11/09/2010) I brewed a Blonde Ale and pitched US-05 yeast. Today there are only few bubles in airlock, so I think since Blonde Ale is a simple style I could bottle in next Sunday ...
6
votes
3answers
550 views

Best Crown Capper

Just capped my first batch of beer (Wohoo!). When I invested in my equipment though, I think I was a bit too frugal with my capping tool - I have a hammer on crown capper. It seems to have done the ...
3
votes
1answer
310 views

Secondary or Bottles

I currently have a stout (my 2nd home brew) in a secondary fermentor (glass carboy). Once it reaches FG, what are the advantages/disadvantages of leaving it in the secondary to condition vs bottling ...