The process of moving beer or wine in to bottles and sealing them for later consumption.

learn more… | top users | synonyms

2
votes
6answers
62 views

How can I get more consistent carbonation in bottles?

Some of my bottles usually turn out over carbonated, and some turn out under carbonated. Is there a good technique to get consistent carbonation? I imagine it is a function of both evenly distributed ...
1
vote
5answers
2k views

Sanitizing with bleach without rinsing

What concentration of bleach (or Sodium hypochlorite) diluted in water is necessary to sanitize bottles? How much time is necessary to keep the bottles immersed in the solution, or is sufficient to ...
0
votes
2answers
119 views

can i bottle cider at 150 sg it has been still for a month

my cider started at 190 and now is 150 and has been still for about a month, can I drink and bottle it at this time?
1
vote
1answer
93 views

Can you load less than 1.3 gallons into the Tap-A-Draft system?

I'm just starting out home brewing and I am planning on sticking with 1 gallon brews for a while. I want to purchase a Tap-a-Draft system but continue with 1 gallon batches for a while. Can you load ...
2
votes
1answer
215 views

When brewing water Kefir my wire bail stopper blew off

I am trying to salvage my one fermenting bottle and wondered if anyone knows how to get the dern top/bail stopper back on the bottle. When I went to open my water kefir it shot liquid everywhere and ...
1
vote
2answers
119 views

Foam on my fermenting beer

My beer iam fermenting which is now 7 days old has started producing a small amount of foam/bubbles on the surface! Everything else is spot on, just wondering if this is normal so near bottling stage? ...
0
votes
0answers
26 views

Bottling stage PROBLEM! [duplicate]

Day 8 of fermenting my beer all is ok except for last 2 days...! The head has started producing a small foam/bubbles that I had the first couple of days. Is something wrong? Please help 😯
2
votes
2answers
351 views

Bottling vs Kegging Questions

One thing that is very confusing to me right now is the difference between bottling and kegging, more specifically the carbonation difference between them. The first doubt of kegging arises when you ...
0
votes
0answers
23 views

Where to buy corks without grapes on them?

I'm planning to bottle my first mead and went looking for corks online, but all the suppliers I'm used to only have corks with grapes on them. Minor cosmetic consideration, I realize, but is there ...
2
votes
3answers
281 views

Is my Cider ready to bottle

ok my question is this i have bought a cider kit on the instructions it says to bottle after 7 days or when it reads 1010 on the hydrometer , my OG was 1072 and i have left it for seven days and it ...
1
vote
2answers
78 views

Carbonation gone wrong?

I was trying my first all grain brew yesterday when I realized that the beer was almost flat, which is weird because they spent about a week inside the bottle. It's a belgian golden ale and I've added ...
1
vote
3answers
87 views

How to Calculate Required Priming Wort at Bottling Time?

I would like to understand how to calculate how much priming wort I need to add at the bottling stage to reach a desired carbonation. Desired Carbonation: 6 g/l Extract: 17°P Amount of fermented ...
7
votes
6answers
746 views

What about corking beer?

I'd like to start corking some of my more delicate brews. Is there a reason to switch to corking? Certain styles? And, is it difficult/recommended for a small setup? Thanks.
1
vote
1answer
71 views

Should I prime bottles of ginger beer as finishing gravity 1027

I had a batch of ginger beer OG 1072 FG 1027. (Crabbies by the way has a FG of 1033) I primed the bottles with a 1/3 tsp and everything was fine. The last bottles 2 months later were pretty fizzy ...
5
votes
7answers
7k views

Is there a technique which prevents the deposit of sediment at the bottom of bottles?

Every beer I've brewed and have seen done by others has had a sediment form at the bottom of the bottles. Is there some common mistake that I and others are making which is causing this to happen? ...
1
vote
2answers
173 views

First Batch Bottle Exploded

I'm in the bottling phase with my first batch of beer. Came home last night and one of the bottles had exploded. The beer spent 7 days in the primary fermenter and hit the target gravity per the ...
8
votes
10answers
18k views

Using Grolsch “Premium Lager” bottles for bottling

In my first bottling, I decided I wanted to try using half normal reused glass bottles with new bottle caps and half reused Grolsch beer bottles. Probably the worst part of the process was having to ...
5
votes
3answers
553 views

Confectioners sugar for priming?

I have a batch of wheat beer on the go at the moment and I'm wondering which sugar to use as priming sugar? In my local shop the priming sugar they sell looks just like confectioners/powdered/icing ...
0
votes
2answers
258 views

Can I get away with not rinsing Potassium Metabisulphite when I'm bottling?

So I was reading some posts here on the homebrew stack exchange, like I do, and I came across this question. I always use K-meta when bottling because I keep my bottles clean and all I need is to ...
1
vote
3answers
206 views

Efficiently sterilizing bottles

I've got 50 bottles to sterilize tonight but unfortunately have an extraordinarily small sink which can only fit 4 bottles at a time. The sterilizer I have (bruclens cleaner) requires everything to ...
0
votes
1answer
273 views

How can I filter out excess cream (trub) before bottling?

I'm making a cream ale and just moved it into a new carboy for secondary fermentation. While siphoning it over, I noticed that there's a lot of solid creamy substance still in the beer. Maybe I did ...
14
votes
8answers
16k views

Am I required to refrigerate bottles after bottling?

My instructions that came with my kit said that I should let the bottles sit for 3 days, then age in the fridge for 10 days. If I don't refrigerate, will I get bottle bombs? Advice on forums and ...
15
votes
7answers
8k views

[WIKI] Bottle Sanitizing Techniques - Pros & Cons

What are the pros and cons of each bottle sanitizing method? Let's look at time, equipment, quality of sanitation, and other factors. Post one answer for each method. Edit the answers if you have ...
0
votes
1answer
49 views

Bottling from a jockey box?

So I've kegged my last batch, was an 'imperial IPA', and will drink it in my house with some few friends. It's a borrowed 19L cornelius keg, and I think that we cannot drain it completely. Since I've ...
26
votes
16answers
12k views

Are there any tricks for removing labels from bottles?

Some labels can be a pain to remove. I've tried soaking bottles in water with a little bit of dish soap but it doesn't really do much to break down the adhesive. What methods do you have for easily ...
0
votes
3answers
921 views

How do I know when bottle carbonation is done?

So this is my first attempt at brewing my own beer. I am using a kit from http://craftabrew.com/collections/starter-kits/products/starter-kit-bone-dry-irish-stout-2 I just bottled the brew last ...
1
vote
2answers
5k views

Where are MillerCoors Light Home Draft units available?

MillerCoors used to sell Coors Light Home Draft and Miller Light Home Draft "kegs" at my local grocery store, but I have not seem them in a long time. The reason I ask is because these units are ...
3
votes
3answers
369 views

Why leave headspace when bottling?

We are told to leave around an inch of headspace (depending on the bottle), but does anyone know why?
1
vote
1answer
150 views

Capper indents bottle cap. Is this ok?

I have a standard, hand held bottle capper and when I am using it I am getting indentations in the cap. The larger problem is that I am having issues with inconsistent carbonation and want to ...
0
votes
1answer
57 views

Reduce Priming Sugar

I'm on my first batch of wort, I didn't account for evaporation and had a couple boil overs, I'm sitting at about 4.25 gallons of wort. Bottling calls for 5oz of priming sugar, should I reduce to ...
1
vote
2answers
144 views

How to bottle new brew properly

I'm new to brewing beer, i've made mead and wine in the past with varying success, I understand the bottling procedure with those two products but bottling beer is foreign to me and I just want to ...
2
votes
3answers
628 views

Kegging Vs Bottling in regards to Conditioning

I recently started kegging, roughly 6 batches ago. Initially I would keg two batches and place them in the refridgerator, waiting two weeks for them to carbonate "naturally" (as opposed to "forced" ...
1
vote
1answer
137 views

Bottle Headspace Problem

I bottled my beer two days ago, primed with honey as per the instructions of my all-grain kit. I've since been reading and found you need to leave about an inch of headspace in the bottles. ...
6
votes
5answers
361 views

Extract brew, sanitizing hop strainer and tap? First brew day!

Last night I made my first ever extract brew. The brew day went pretty well. As I have a 32 litre brupak boiler with a hop strainer and tap I cooled the wort with cold bottled water straight in the ...
1
vote
1answer
114 views

Is it better to age a wine in bottles rather than bulk aging?

My partner and I are brewing a 6-gallon wine batch, and we disagree over when to bottle it. It's been in the carboy for approximately 8 months, and I've read here and on other sites that bulk aging ...
1
vote
2answers
361 views

Can I Bottle Ginger Beer after the bubbles have stopped?

I'm a ginger beer neophyte, but I love the stuff and can't find it in my area. I decided to brew and have two, three gallon glass carboys working(?) In one I used an extract, champagne yeast, sugar ...
1
vote
1answer
480 views

Cold crashing bottled ale after fermentation

There are a few topics about this here but nothing that gives info on my particular situation... I've fermented in primary for 1 1/2 weeks then transferred to secondary. Left the ale in there for ...
1
vote
4answers
327 views

Do I have to bottle/keg an ale?

I've got an ale (23L) that's been brewing for six days now, my recipe says I should bottle or keg it after eight. I don't have any bottles or a keg, but I do have another bucket (25L, made for brewing ...
1
vote
2answers
82 views

Half my batch (while carbonating) got put in the fridge by mistake

They were put in the fridge at day 11 or 12. I'm afraid to take them out (to resume carbonation) because of skunking. Is this valid? I've read the other questions about carbonation/temperature, etc, ...
4
votes
2answers
2k views

in depth cleaning glass bottles

I realise there is a tonne of information about cleaning on the net already, but I am just about to bottle my first batch of glass bottles and wanted to put my process out there to make sure I haven't ...
8
votes
1answer
3k views

Can I keep mead/wine in stainless steel bottles?

So what do you use for bottling? I'm really starting to look into stainless steel bottles. There are companies that make them (with customized artwork, no less) for conference shwag but you could ...
2
votes
7answers
284 views

Bottling Rhythm and efficiency

I've read the answers on how to sanitize bottles while bottling [here] but my question is this... Should you cap a bottle right after filling it, or can you fill say 6 bottles, cap them, then put ...
18
votes
6answers
9k views

Is there anyway to tell if a glass bottle of beer is carbonated without opening it?

It would be great if I didn't have to ruin a bottle of beer by opening it to test to see if it carbonated. Is there any way to tell?
2
votes
1answer
149 views

Does oxygen introduced during bottling get consumed by the yeast during carbing / conditioning?

I was just thinking about oxidization at bottling time... If you (accidentally) introduced oxygen into your beer when bottling, wouldn't this be used by the yeast the same way it is when you ...
1
vote
4answers
514 views

Kegging but without CO2 tank

I got an annoyance issue here. I have a Cornelius keg 19lt and 15-16 liter batch of Wit-beer almost ready to go, but poorly timed.Issue is I currently don't have the CO2 regulator or Tank. Reason for ...
0
votes
2answers
235 views

Safe to bottle IPA with higher FG than expected?

The expected FG from my receipt was supposed to be 1014, but it has been stable at 1020 for about 3 weeks now. The wort has been on the fermentation tank for about 4 weeks, it reached 1020 after 1 ...
3
votes
3answers
256 views

When dry hopping, do you wait for clearing before bottling?

I'm still a beginner, this forum has helped me a great deal. I made an IPA, which cleared very well in the primary. It was transferred to a secondary for dry hopping, adding a muslin bag with 1 oz ...
1
vote
2answers
137 views

Turn Bottling Bin into a Mash Tun?

If I attach a removable mesh filter to hold back the grains and I properly insulate the entire bottling bin, can I dual wield it as a bottler and as a mashing tun? What benefits are there to having ...
1
vote
2answers
234 views

Using mason jars to bottle in?

Has anyone used mason jars to bottle in? What were your results if so? They are being sealed like when you can, so I'm especially curious if they hold pressure well. (I know they are clear, and that ...
4
votes
1answer
700 views

Beeswax for bottle waxing

Has anyone tried making their own bottling wax using part beeswax? What percentage of beeswax did you use and how well did it work (coming on and coming off)?