The change in characteristics and carbonation of beer due to the presence of live yeast in the bottle.

learn more… | top users | synonyms

7
votes
7answers
4k views

Should I shake bottles during conditioning?

I've got a batch of beer which was bottled last Saturday and a friend insisted I should shake them to assist in the conditioning. He couldn't offer any particular reason, so I was curious if/when it ...
5
votes
2answers
139 views

After a beer reaches it's final gravity, how long does the conditioning step take?

I have been in the habit of leaving my beers in their primary fermenter for three weeks across the board, which is a significant amount of time longer than their primary fermentation usually takes. My ...
0
votes
3answers
2k views

Will refrigeration help carbonate my beer?

After two weeks of bottle conditioning at about 55-60°F (13-16°C), my beer is still a bit flat. I put a few in the fridge and after 2 days, they tasted just as flat. At this point, what should I do? ...
1
vote
1answer
91 views

Bottle conditioning

More reading - this time about bottle conditioning. If my yeast attenuation level is say 80%, does that mean there would be enough sugars in the bottle for the yeast to carb the beer? Or would priming ...
3
votes
3answers
120 views

Yeast “cake” after bottling

I recently bottled this recipe, last Sunday (2014-03-09). I popped one open today, and it is damn tasty, and even decently carbed after less than a week. However, all the bottles have about a half ...
17
votes
6answers
6k views

Is there anyway to tell if a glass bottle of beer is carbonated without opening it?

It would be great if I didn't have to ruin a bottle of beer by opening it to test to see if it carbonated. Is there any way to tell?
2
votes
4answers
139 views

Do I Always need to add Sugar when bottling?

I'm doing my second brew after great success with the well documented Brooklyn Brewshop Everyday IPA. This time is the exact opposite, random recipe and random grains. I went to a brew shop and had ...
3
votes
2answers
187 views

Bottled and right into the fridge

I added sugar, bottled, then put them into the fridge instead of leaving them at 68-76 degrees for a week. What should I do now, or is it too late to save the batch?
2
votes
1answer
122 views

Should I see bubbles in an opened bottle when carbonating by bottle conditioning?

I have been bottle carbonating for the last 10 days. The temperature has been fairly consistent, between 17 - 20. I can see a little sediment, which suggests fermentation, but I can't see any bubbles, ...
4
votes
3answers
664 views

Storing bottle conditioned beers and carbonation.

I store all my beer at 55 degrees. Do I need to worry about the beers that are bottle conditioned not being carbonated, or not being at the proper carbonation level? Should they already be carbonated ...
0
votes
2answers
85 views

Longer time on yeast for a bigger beer?

I ferment all my beers single stage in a glass carboy immersed in a water bath to maintain temperature. This is the first time I've made a bigger beer (this one started at 1.080) on this system. I ...
0
votes
1answer
134 views

Testing Bottling Carbonation

So, I bottled 6 days ago. I'm a little impatient, and want to see how my carbonation is going. What can I expect if I pop one open today? I haven't noticed any difference in the beer in the bottle, ...
1
vote
1answer
38 views

What is Disgorging or Dégorgement?

What is Disgorging and how is it performed on fizzy wine? I have heard it is a part of the process to make champagne.
0
votes
2answers
198 views

Cold Crashing in the bottle?

Is it possible or advantageous to cold crash after bottling? I am aftaid if I cold crash for 2-3 weeks before I bottle that all the yeast will settle out and I wont have any to provide carbonation ...
13
votes
7answers
3k views

Expect the Unexpected: How can I prepare for bottle-bombs?

Just had my first explosion last night. Very disheartening to discover a 22oz bottle spread all over the basement floor with little tiny shards of glass splattered everywhere. I remember overfilling ...
0
votes
3answers
127 views

Is this a sign of improper carbonation or improper bottling?

This is a story of two very different pours from the same batch. TL;DR: the first bottle was foamy and very carbonated, the second was normal, but the first bottle went flat and was cloudy, while the ...
19
votes
7answers
6k views

Can I condition in growlers?

I read up a decent amount on conditioning in growlers before attempting it. I wanted to share my experience and see if others had had similar experiences. The thinking, of course, is to minimize ...
4
votes
2answers
186 views

Why does my witbier stink?

I've searched far and wide and can't find a good answer. Seems to be a lot of talk about the sulphur smell I noticed during fermentation, but this is a bit different. Brewed this masterpiece up and ...
3
votes
3answers
187 views

Lagering (Secondary to Bottling to Lagering)

So I recently bottled a pilsner recipe after a drop from 1.061 to 1.011 specific gravity (over 6% ABV potential), and my recipe instructions called for 7-10 days at room temperature (since they've ...
8
votes
5answers
8k views

Bottles didn't carbonate, anything I can do?

Brewed an Oatmeal Stout and it has been in bottles for about 4 weeks now and still the bottles haven't carbonated. Tried the first bottle after 2 weeks and it was very flat. Now I just opened one ...
0
votes
1answer
98 views

Using juice as bottling sugar

So, I have brewed a big batch of kombucha. Normally, the original gravity is 1.020. But this time, I created a 1.016 batch. After nine days, the gravity went to 1.014 and the pH to 3.4. The ...
4
votes
3answers
594 views

Over carbonated what went wrong? Detailed

I realize this question has been asked a few times, however, I'm curious as to where I specifically went wrong with my batch. I can't seem to pin point it. I brewed a batch of IPA that tasted amazing ...
2
votes
2answers
1k views

Does temperature during bottle conditioning effect the flavour?

I made a Weis beer and my primary fermentation temp was 19C. After 2 weeks I mixed priming sugar into my beer and bottled it. I then conditioned the bottles for a week at 21C. I know when in primary ...
1
vote
1answer
428 views

What is the right amount of priming sugar for a bottle with expandable head space?

When bottling in plastic (PET) bottles, it is possible to eliminate oxygen from the bottle by squeezing the bottle. Below is a 3 liter bottle with only one liter of beer in it: I have done this ...
2
votes
1answer
114 views

Does Low-Attenuated Wort due to Low Temperature have a Higher Propensity to Bottle-Bomb while Bottle Conditioning at a Higher Temperature?

I bottle condition underwater with frozen water bottles to keep the temperature down. I probably bottle conditioned my last batch of beer beneath 60*F, and it didn't carbonate all that well, or at ...
3
votes
4answers
4k views

Why is there so much foam when I open the bottle?

I have a batch of beer, fermented and then bottled. When I open the bottle, there is a lot of foam and it flows out of the bottle for a while. What could cause this? I assume it's too much CO2 and ...
1
vote
2answers
210 views

Refrigerated bottles when they were not finished bottle conditioning

I had three more days of bottle-conditioning to go on one batch of beer, yet I accidentally put them all in the refrigerator instead of a different batch that was finished. Can I just pull them out ...
4
votes
1answer
960 views

How long should I leave my wheat beer in bottles before opening

So far the beer has been in primary fermentation for 11 days, and in bottles now for 4 days. When would you expect the beer would hit optimum flavor and when will it be drinkable/pleasant? Thanks.
1
vote
1answer
1k views

Flat beer. Not enough priming sugar?

I'm new to this blog and brewing. Recently i put down my first Coopers Real Ale. All went well, great flavor but flat to very slight carbonation in bottles. 1.5 tsp in 1250ml and .5 tsp in 750ml ...
1
vote
1answer
475 views

My bottles are Conditioning underwater. Why are there bubbles on the caps on day 2 but not day 0 through 1?

On Sunday (day 0) I bottled beer for the first time (with my first batch). I asked my brother how I could determine whether or not I successfully locked the caps onto the bottles to make them ...
2
votes
1answer
504 views

bottles not fermented after 3 weeks of conditioning. Good or bad?

It's been three weeks, and my impatience has had me crack one bottle on days 7, 14, and now 20. There's no carbonation in these bottles, and it doesn't appear to be getting any better over the weeks. ...
1
vote
2answers
353 views

How to improve freshness bottled beer?

I'm getting some sour flavors and off-aromas in my bottled beer when they have more of one month in bottle. When the beers are young, they taste really good with full aromas, but even if I stored all ...
2
votes
1answer
256 views

How long must an ale be conditioned in bottles outside of the fridgerator?

I bottled my first batch of beer 72 hours ago. I am under the impression that bottled beer should not immediately be placed in the refrigerator, as this would prevent the remaining yeast from ...
13
votes
3answers
5k views

How long will bottled beer last?

How long will bottled beer last without refrigeration?
1
vote
2answers
126 views

Priming sugar/drop mixing worry, in a test bottling

I'm preparing to bottle a 30 pint batch of Ginger Beer. It started at 1.041 and has finished at a steady 1.008 after 2 weeks or so. I siphoned one bottle's worth earlier into a 500ml flip-top, and ...
1
vote
1answer
130 views

Inconsistent flavor between my bottles

I bottled my second batch of beer, a nut brown ale recipe from northern brewer. I added coffee to the secondary, and my first bottle I had after 2 weeks bottle conditioning tasted like a nice coffee ...
4
votes
3answers
744 views

Beer not carbonating

I'm having issues with my Belgian Tripel not carbonating. There is a small amount of sediment in the bottles, and I get a hiss when they're opened, but that's about it. It's gotten cold in Virginia ...
7
votes
1answer
1k views

Can I bottle condition / carbonate my Hefeweizen at “room” temperature (74-78 degrees)?

My first brew is almost ready for bottling. Winter is pretty much non-existent where I live, so "room temperature" is typically between 74°F and 78°F (23°c to 26°c). I was planning to leave the ...
0
votes
1answer
457 views

Is this fluorescent light harming my beers during bottle conditioning and storage? [duplicate]

Possible Duplicate: How much light is too much light? I've read most of the posts about skunking and fluorescent lights, and from what I can tell it would take quite a bit of light to skunk ...
0
votes
3answers
299 views

Creating a priming solution

I normally have more beer coming out of the fermenter than fits in my kegs, so I wish to bottle the excess. Since I will be force carbonating the contents of the keg, I do not wish to prime the whole ...
1
vote
1answer
351 views

Batch not carbonated/off flavor a week after bottling

What does a home brew taste like if it is contaminated? I just bought a home brew kit about a month ago that came with a recipe for an Irish Red Ale. My beer has been bottled now for a week and upon ...
2
votes
3answers
1k views

What is causing a bad flavor after cold conditioning?

I've had something happen to a couple batches and can't figure out what's going on. What happens is a major flavor change after the first two weeks of primary, but for the worse. Normally my beers ...
3
votes
1answer
632 views

Why does the temperature of bottle conditioning determine the amount of priming sugar?

When using CO2 calculators or the nomograph on Palmer's site we see that depending on the temperature of your beer, you use a different amount of priming sugar in order to get the same effective ...
7
votes
1answer
563 views

Storing beer bottles horizontally

I've discovered that bottles fit in my storage fridge much more efficiency if I stack them horizontally, and I'm thinking of building some wooden racks to let me fit more bottles safely and securely. ...
1
vote
0answers
514 views

“Bottle” conditioning in a growler?

I'm a week or so away from bottling and I was curious: I have a 2 L growler from a local brewery with one of those EZ-Cap type lids, will it be a good enough vessel to bottle condition? Not having to ...
5
votes
1answer
223 views

Berliner Weisse questions

I have a Berliner Weisse (1.035 O.G.) that has been fermenting on WLP630 (berliner weisse lacto blend) for about 5 days now. This is my first attempt at both a sour style beer and a starting gravity ...
3
votes
3answers
284 views

Head Retention improves with bottle conditioning?

I brewed an oatmeal stout and bottled it about 2 months ago. Most of the batch was drank within a few weeks of bottling. Tonight I opened the last bottle. This pour had significantly better head ...
4
votes
3answers
842 views

Brettanomyces and Bottle Conditioning

When working with brettanomyces "Brett" should I adjust the amount of priming sugar I use? Does brett have any affect on quantity or quality (fineness of bubbles etc.) of carbonation in the bottle? ...
1
vote
2answers
107 views

Attribute taste variation to volume of bottle?

This is not exactly a home brew question but this site seems to be the best fit in the stack exchange network for it. You can home brew the beer in question with a kit produced by the brewery though ...
3
votes
2answers
354 views

Bottle conditioned brew has condensation

Is condensation okay in a finished bottle conditioned homebrew? It has been two weeks and I just tested one, it tasted fine but I am curious if that is ok. Also, some of the bottles have some white ...