A fermented beverage where the majority of the fermentable sugars are derived from malted grains via mashing.

learn more… | top users | synonyms

1
vote
3answers
142 views

Will Adding an Active Mash to a Non-Active Mash Get Enzyme Activity Started Again?

Background: A friend of mine does ten gallon batches of big beers, so has a lot of grain. After mashing, his technique is to fly sparge with 170 degree water. I understand this shuts-down enzymatic ...
9
votes
5answers
9k views

Am I required to refrigerate bottles after bottling?

My instructions that came with my kit said that I should let the bottles sit for 3 days, then age in the fridge for 10 days. If I don't refrigerate, will I get bottle bombs? Advice on forums and ...
8
votes
2answers
1k views

How do I decide if the beer is ready? Is my fermentation complete?

This is my first time brewing and I've followed the instructions from a kit. It says to leave the beer in the key for two weeks and its ready when it stops being cloudy. Its now been a little over ...
6
votes
4answers
1k views

Can an infection be identified by sight?

I brew ten-gallon batches of beer split into two fermentors. The last batch that I kegged had one infected fermentor, while one remained uninfected. One bucket showed a white powdery substance ...
4
votes
1answer
143 views

Long cooling before pitching — aerate now or later?

This is a follow-up to this question: Long cooling before pitching -- read that for background. I aerate to add oxygen to my wort by pouring back and forth between buckets. If I wait before ...
8
votes
2answers
229 views

Fly Sparging: Can I start boiling straight away

I fly sparge directly into my boil kettle and in general I have the heat on while I'm doing this. When this was on my stove it wasn't powerful enough to get the water boiling before finishing the ...
4
votes
2answers
458 views

Barleywine fermentation is slow. How can I speed it up?

My barley wine has been brewing for two weeks it should have be 1108 after 4-6 days its currently still fermenting at 1025.Its been at a constant temp of 22 degrees. However when yeast was added it ...
6
votes
4answers
3k views

Recover a brew that quit fermenting after I moved to secondary fermenter

I started my first batch of beer, a "Nut Brown Ale", 2 weeks ago. Its initial gravity was 1.040. As per the instructions, I siphoned the beer into the secondary fermenter (a glass carboy) after two ...
3
votes
2answers
100 views

Soluble yeast estimation before carbonation

Any suggestions on how to estimate the amount of yeast that remains in the brew solution after standard transfer practices without using clarification? I know that some remain because of priming ...
8
votes
5answers
1k views

How do you calculate a beer's nutrition facts?

How can I figure out a beer's nutrition facts when I've homebrewed? It's not a sum of the ingredients any more, is it? --EDIT-- So when I say "beer's nutrition facts" I means values like calories, ...
3
votes
3answers
783 views

I forgot to add my extract until the end!

So, I was brewing distracted, which I will never do again, did everything right...except I didn't remember to add the big jug of liquid malt extract to the wort, or hopped water in my case! You would ...
1
vote
1answer
198 views

Hydrometer reading

I am forgot to take a hydrometer reading when I put the beer into the primary fermenter. Can I take one when I transfer to the secondary and what will it tell me anyway?
4
votes
2answers
349 views

Transfer to secondary.

I am transfering my beer to a secondary fermenter (better bottle carboy). Do I need to shake or stir it to help the fermentation in the secondary!
4
votes
2answers
3k views

Can I use a Growler at bottling time and how long will the beer last in this.

I had a growler from a local brewery and filled it at bottling time. I made sure I sanatized the bottle and top. I did this to take a sample test before the three weeks of bottle time. Is this OK and ...
8
votes
5answers
531 views

How can I compare hop flavours quickly?

I want to try and acquaint myself with different hop flavours and brewing a few batches of beer can be quite time consuming (and wasteful if the results are no good). How can I quickly (in say, a ...
7
votes
1answer
262 views

Victory v. Biscuit malt

Are there flavor differences between these two malts? How can each be described? I have used them both but often in complicated recipes, and never side by side for comparison. How is each produced?
16
votes
4answers
971 views

What happens in the bottle?

I often drink a bottle 2 or 3 days after bottling, and then often every day or 2 after that, and it's sometimes quite amazing to see those "rough edges" getting smoothed out. Can someone explain what ...
5
votes
1answer
255 views

Ramping temperatures during fermentation

What is the appropriate way to ramp temper when say brewing a Belgian beer? Would I expect to have off flavors from the higher temps? What's the best range for ramping? Do I actively manage the temp ...
11
votes
3answers
3k views

Do I need to sterilize my top-off water?

I just purchased my first kit and am about to brew it (tonight!). The instructions provided indicate that after cooling the wort and tranfering it to the sanitized carboy I need to top it off with ...
4
votes
3answers
874 views

Munich and Vienna Malts - Dullness

I don't have a whole lot of experience (I've been brewing all-grain for less than a year) but I've found that every beer I've made with Munich or Vienna malt (usually 2 - 4 pounds in a 6-gallon batch) ...
5
votes
3answers
611 views

Does flaked rye need conversion?

I'm looking to make a rye pale ale. Do I need to provide enough base grains to convert the starches in flaked rye or is it capable of self conversion? If it needs conversion, would 6 lbs of 6-row work ...
8
votes
5answers
1k views

Long cooling before pitching

Summer brewing means warmer tap water, which means that my immersion chiller can only cool the wort to about 75 degrees. I typically cool the wort to 68 degrees before pitching. I have a ...
9
votes
1answer
614 views

Is it possible to boil wort too quickly?

I recently picked up this burner and was excited to use it to bring my wort to a boil. I had it cranked up pretty high and it took about 15 minutes to bring 6 gallons of wort to a rolling boil in a ...
7
votes
4answers
1k views

Performing a hop boil seperate from the wort boil.

I'm curious to try some single-hop style beers and would like to do several varieties in one brew day. My ideal situation would be to make a five gallon batch of an unhopped pale ale as the base and ...
6
votes
2answers
125 views

Amounts of various oils in hops.

I have a beautiful chart that shows the level of various hop oils in different hops, as well as their typical alpha acid percentages. Where can I find the raw data that would go into a chart like ...
7
votes
1answer
2k views

When using whole hops, do you need a larger amount than you would hop pellets to achieve the same bitterness?

I have read that whole hops impart less bitterness than pellet hops by weight. I have used pellet hops for all of my brews thus far. I have a recipe that I am happy with, and I want to switch to ...
3
votes
0answers
150 views

Making a gose (salt in beer?) [duplicate]

Possible Duplicate: Gosebier- a unique style I recently fell in love with the Gose style of sour wheat beers (similar to a Gueze), thanks to kegs of Bayerische Bahnhof invading my town. ...
7
votes
2answers
2k views

How to troubleshoot flat beer?

Since I started brewing in January, every single batch (6 so far) has come out flat. I've had a couple come good after a few months in the back of the garage but for the most part, it's all flat. At ...
4
votes
1answer
436 views

I think I ruined my first brew

After years of finding excuses to not home brew, I finally gave in and bought a starter kit from Brewers Best and ingredients for my first batch; Muntons Connoisseurs Export Pilsner. Anyway, it's ...
12
votes
5answers
888 views

What is a good definition of beer?

My wife asked me what the definition of beer was, and my best response was my understanding of Reinheitsgebot definition (which may or may not be correct). Beer contains: Malted Barley Hops Water ...
5
votes
2answers
812 views

Bubbling suddenly stopped - is this a problem?

This is my second home brew. I chose "Coopers Mexican Cerveza" with "Muntons Beer Enhancer". It's only day 4 out of 7 weeks but on the second day, the whole bin warmed slightly and there was a lot ...
14
votes
2answers
230 views

What is “well attenuated maltiness”?

I am studying to become a BJCP judge. I was reading through Style 2a German Pilsner and saw something in the flavor profile that I didn't quite understand thoroughly. It says Moderate to ...
2
votes
4answers
660 views

What makes an addition good for a basic wheat beer?

My second batch of beer will be a basic wheat beer and I will rack half with peach puree and half without to see the difference. I am looking for suggestions of other additives for wheat beer. ...
8
votes
3answers
882 views

Three-finger head but tastes flat?

I recently brewed a Belgian Wit extract kit. Bottle conditioned with 5 oz of priming sugar. I'm pretty happy with the taste. With a medium speed pour into a Pilsner glass, the beer develops a ...
7
votes
2answers
1k views

How do you malt your own barley?

My local health food store sells various types of grain, including barley, which are labelled "unprocessed". So my question is - can I malt this barley and use this in my homebrew? How does one malt ...
6
votes
2answers
690 views

Choosing a yeast for ginger beer

I'm doing some experiments with ginger beer (this is a alcoholic beer, not a soda). I'm use brown sugar as the sugar source for now, but may experiment with other sugars including malt as I go along. ...
1
vote
4answers
2k views

Summer Shandy, anyone ever made it?

Anyone ever tried to make a beer like Linenkugels Summer Shandy? Its a beer brewed with lemonade... and very tasty on a hot day!! Any suggestions on how it might be made?
5
votes
4answers
1k views

What is this white stuff on the surface of my beer?

I've just gone to rack & bottle a witbier that has been in primary for about 5 weeks and noticed this white gunk floating on top of the beer. It doesn't look too healthy, what is it? Is it safe? ...
7
votes
4answers
2k views

Brewed beer turnaround time

As homebrewers why do we take longer to ferment our beer than what seems like the time-line at the commercial/pro level. Everytime I take a brewery tour or a listen to a podcast that interviews a pro ...
5
votes
2answers
1k views

Diacetyl Rest for Wyeast 2206 Bavarian Lager

The Wyeast website seems to strongly suggest a diacetyl as fermentation completes with their Bavarian Lager strain, 2206. I prefer to chill my wort to below fermentation temps prior to pitching the ...
4
votes
3answers
3k views

sediment at the bottom of brew

I have just bought a Coopers DIY beer kit and have started my first ever brew. Ive notticed at the bottom of the fermenter there is a lot of sediment is this normal or have I done something wrong? Any ...
6
votes
3answers
1k views

How long should Belgian Blonde beer be aged?

I'd like to reuse my Belgian yeast (Zymoferm Z039 Belgische Klosterbiere und Ales) and I'm looking for information on how long various Belgian beers should be matured. My cellar capacity is very ...
6
votes
3answers
1k views

How many times can I re-use oak cubes?

I'm about to add oak to my second beer, having thrown out the cubes from my first tasty experiment. This time I hope to pull them back out, store them in bourbon, and re-use them. How much of the ...
7
votes
4answers
509 views

Short boil and DMS

So I just had a small brewing mishap where I added too much hops. WAY too much. I somehow mistook my 2oz hop pellet bag for a 1oz bag and added 1.5ounces of chinook instead of .75 . This brought my ...
6
votes
2answers
280 views

What elements are common to Shiner Bock and Real Ale's Fireman's #4?

Shiner Bock and Fireman's #4 both have this weird aftertaste that I can't stand. Any idea what they both have in common so I can avoid it? EDIT: It's almost a slimy taste (I know slimy is not a ...
8
votes
2answers
411 views

At what point can a beer be called organic?

A lot of the homebrew I make is made with organic ingredients - organic grain and hops. However, I have never come across organic yeast (!?) or irish moss. Can I rightly call this beer organic, or ...
6
votes
4answers
1k views

Why would someone use Cascade for bittering over Amarillo?

Apparently, Cascade is commonly used for bittering, and I'm not sure I understand why someone would choose that over the very similar Amarillo, which I think is less common for bittering. Cascade has ...
4
votes
2answers
523 views

Undershooting OG in all-grain brewing

My last few all-grain batches have been under the expected OG at least as far as the recipe is concerned. The beers still taste good and all, but I'd like to get my efficiency up. For example, my ...
4
votes
5answers
608 views

Is there anything special needed to try brewing a Belgian Ale?

I am a beginner looking to get started with homebrewing. Belgian Ale is my favorite style, so I was wondering if there are any specific problems with trying to do a Belgian-style Ale as my first ...
4
votes
2answers
503 views

What is the advantage of krausening?

Krausening seems to be a fair bit of work to the homebrewer with very little return. So, what advantages does krausening bring, other than not having to add any additional sugar to the beer for ...