A fermented beverage where the majority of the fermentable sugars are derived from malted grains via mashing.

learn more… | top users | synonyms

6
votes
3answers
1k views

How many times can I re-use oak cubes?

I'm about to add oak to my second beer, having thrown out the cubes from my first tasty experiment. This time I hope to pull them back out, store them in bourbon, and re-use them. How much of the ...
4
votes
2answers
256 views

Does preboiling oak cubes kill the brettanomyces

I have a Flanders Brown ready to be kegged for aging, and I'm going at add some oak cubes for the flavor and oxygen and bugs. I've heard it's a good idea to boil the cubes first, but I feel like that ...
19
votes
7answers
31k views

If/When to move to secondary fermentation

Digression from What's the point of secondary fermentation? What are the good rules of thumb for determining a. whether to use secondary fermentation at all and b. when to move from primary to ...
5
votes
2answers
364 views

Yeast, CO2 Toxicity with mead and beer

Degassing CO2 during early fermentation is important for wine and mead. But why not for beer? I'm getting back into mead making and see plenty of references to degassing the must during early ...
2
votes
3answers
1k views

What is causing a bad flavor after cold conditioning?

I've had something happen to a couple batches and can't figure out what's going on. What happens is a major flavor change after the first two weeks of primary, but for the worse. Normally my beers ...
0
votes
1answer
76 views

Yeast in Black Dog Ale

Just ordered a 5 gallon Black Dog Ale kit from Midwest brewing supplies and I have some Saflager W-34/70 in my fridge. Would this be a good yeast to use or would I be better off with the Wyeast ...
4
votes
1answer
512 views

Malt extract fermentability

Does anyone know of resources that specify the fermentability of malt extracts like muntons and coopers? Has anyone done a forced fermentation on these extracts who has results they are willing to ...
11
votes
5answers
5k views

Early vs Late secondary fermentation

When do you start your secondary fermentation? Some people wait until the bubbles of the wort stop completely, others leave the wort in the fist fermenter for 3-4 days and then move on to secondary ...
3
votes
3answers
246 views

Undershot OG with extract brewing

Today I attempted an American IPA (Extract) full boil. I calculated the OG to be around 1085 using beersmith. The recipe included just over 11lbs of fermentables (9.15lbs LME, 1.10lb DME, 1lb corn ...
7
votes
5answers
164 views

Hop variety resources

Are there any good resources for finding out which hop varieties have similar aroma, flavour and bittering potential. E.g. a place to lookup a hop could be substituted for another hop for bittering ...
5
votes
3answers
809 views

What is a good alternative to Magnum hops in a barleywine?

I'm thinking about brewing a barleywine. A recipe that looks interesting to me uses Magnum and Horizon hops, but I don't have access to either at my (small) local brewing store. What are some good ...
9
votes
3answers
603 views

How much hop bitterness dissipates with time?

I am planning to age a big Russian Imperial Stout for about a year. I understand that during this time, the bitterness imparted by the hops will dissipate. If I want to maintain a balance, I'll ...
1
vote
3answers
484 views

Apricot ale alternative?

I have the following recipe in my primary fermenter and had planned on making an apricot ale. I have since realized that apricots are far out of season and my two apricot alternatives are A) make a ...
2
votes
2answers
514 views

Does keg secondary fermentation temperature matter?

I'm considering investing in a keg, fridge, etc. I live in a warm climate and currently do secondary fermentation in the bottles in the heat. I've read that people have chest freezers to store kegs. ...
1
vote
1answer
426 views

What size keg to get for 23L brews?

I'm thinking about investing in a keg, etc. done some reading but still have a lot of questions. I currently bottle from brew cans which fill the fermenter to 23L and comes out to about 30x 750ml ...
7
votes
1answer
281 views

What is the benefit to filtering beer?

I'm not a home-brewer, but this seems like a good place to ask the question. why are many commercial beers filtered? I prefer unfiltered beer and I am just curious to know why they filter it in the ...
4
votes
3answers
635 views

Why add a tee next to the pump?

I've seen it recommended in several places to add a tee in the pipe next to the pump used for transferring hot wort. What is the point of this / what benefits do you get? Does the tee go on the input ...
0
votes
1answer
248 views

Will using Winemaker's Acid Blend to adjust mash pH have a flavor impact on beer?

I got a pH meter for Christmas and today was my first chance to try it out. Unfortunately, I didn't think to get any lactic acid. I found that my mash pH was at about 5.8 at 148F, so I put a ...
16
votes
1answer
1k views

Partial vs. Full Voume Wort Boil

The starting postion for most new extract brewers is to use a partial boil set up. Defined as using a pot smaller than the intended batch size, all the ingredients are boiled in a smaller volume. ...
5
votes
3answers
2k views

How can I restart fermentation on a stuck strong dark belgian ale?

What can we do to restart fermentation that got stuck over the winter? Our club brewed about 7 gallons of this recipe in November. Primary went well, but then the weather got cold and the yeast went ...
16
votes
6answers
12k views

What happens when beer freezes?

After a bit of trouble with a thermostat on a 2nd hand fridge, I discovered that my latest batch of bottled, ready-to-drink brew had frozen. What happens to beer when it freezes? Will the taste be ...
1
vote
2answers
198 views

Start a little business of hemp beer

My father started a small cultivation of hemp (~ 2 ha) for business. I would like to start to make my beer from hemp. Unfortunately i am an absolute beginner on this subject. Which are the most ...
0
votes
1answer
408 views

Slight fizz in beer after 6 days in the fermenter - game over?

I put a batch on last Sunday, started off with a crazy high reading on the hydrometer (around 1080 when I was expecting 1040ish according to the kit) - though I suspect that was because I drew a ...
7
votes
1answer
422 views

Can I make urwagwa?

Urwagwa is a popular beer in Rwanda made from bananas, and I'd like to brew some myself. The recipes and methods I've read online have some very traditional methods (e.g. Bury the bananas for a ...
2
votes
1answer
192 views

Suggestions for inline heating unit housing for wort circulator?

I built an inline heating element assembly using some 1" copper pipe, a 1" threaded female fitting and some 1/2" fittings. The idea is, wort comes in from the bottom 1/2" fitting, flows over the ...
3
votes
1answer
310 views

Re-using the yeast cake for another brew!

Just finishing up a American Ale and was told by another homebrewer that I could use the yeast cake in the fermentor to brew a hard apple cider when I transfered the beer to bottles for conditioning. ...
7
votes
6answers
2k views

Reusable Beer Label

So my Dad is an avid brewer, and has always re-used old beer bottles that we drank our way through to bottle his home-brew in. However, for Christmas I made a label on photoshop with our families ...
3
votes
3answers
2k views

How to maximize the maple syrup flavor and minimize the cost?

Is it possible to add less maple syrup later in the boil or even after the boil and get a comparable flavor to adding more earlier in the boil? It seems like we should be able to essentially "dry ...
0
votes
3answers
259 views

Move to secondary?

I put my wort in the primary 9 days ago and dry hopped with 1 ounce of Cascade pellets and used a Wyeast 1272 American direct pitch activator pack. I have not taken any readings but noticed it was ...
5
votes
2answers
220 views

What effect will water with a high Zinc content have on my brew?

I'm about to brew some cider, followed by some pale lager from two kits. I've decided to use bottled spring water from a company just up the road from me. They claim on their website that their water ...
12
votes
5answers
895 views

What is a good definition of beer?

My wife asked me what the definition of beer was, and my best response was my understanding of Reinheitsgebot definition (which may or may not be correct). Beer contains: Malted Barley Hops Water ...
11
votes
5answers
1k views

Is it necessary to aerate wort when pitching onto an existing yeast cake?

To my knowledge, aeration provides oxygen so that the yeast can reproduce before fermentation. If you're pitching onto an existing yeast cake, there should theoretically be enough yeast already to ...
2
votes
1answer
2k views

Sanitizer sucked back into beer, dangerous?

So I just fermented a 80 Shilling and thought I would try cold crashing for the first time. I dropped it from mid 60's to 38 or so in a 24 hour period and it sucked about 4 cups of sanitizer up the ...
9
votes
5answers
4k views

Is beer bad for dogs?

My dog, Lilly Von Shtupp, loves to drink beer. I only give her an ounce or so once in a blue moon, but I stopped recently because I heard that dogs are sensitive/allergic to hops. Can anyone either ...
1
vote
1answer
250 views

Looking for a specific fitting

I bought a blichmann therminator, and I want to hook up stainless camlock/ groove 1/2" nipples to all 4 "openings". Problem is, the coolant line in/ out are 3/4" GHT, which, while I understand why ...
1
vote
1answer
637 views

Day Three, still no apparent fermentation

During my most recent brew session I may have been a little too relaxed, and had a few too many homebrews during the process. I feel like I did everything right and kept everything sanitary, but ...
3
votes
2answers
148 views

Strawberry Blond

This is my second attempt at home brewing, my first came out very well. I added a couple of pounds of strawberries to my primary. After one month a racked to my secondary. I was not expecting to ...
2
votes
1answer
120 views

Wort transformation [closed]

Just entered a contest at a local pub. We are given 5 gallons of finished wort and then we have to finish the brew and bring it back to be judged after fermentation and bottling . We have to pitch the ...
13
votes
4answers
1k views

How can I maximize dry hops aroma?

I recently made an IPA. I put an ounce of Cascade pellets in the secondary (for a 23-litre [6-U.S.-gallon] batch), but there is hardly any hops aroma in the finished product. By the end of the two ...
5
votes
4answers
388 views

Weighing Liquid Malt Extract

In Brewing Classic Styles by Jamil Zainasheff, many of the recipes call for LME. Often, the amount is 0.5 lbs or similar, particularly of things like Munich extract. I typically brew all-grain, but ...
3
votes
2answers
408 views

Lager krausen won't fall

I'm brewing my first true lager with White Labs WLP800 and the krausen won't fall. I'm being somewhat impatient because it's taking up primary space right now. I pitched at 44°f and let it rise to ...
7
votes
8answers
2k views

What's the best way to rack beer off of fruit?

I recently brewed a 5.5 gallon batch of witbier. After primary, I bottled 3 gallons of it and racked the other 2.5 gallons into a 3 gallon carboy atop 24 ounces of raspberries. After the secondary ...
4
votes
4answers
269 views

Repitching yeast on back to back brews, which one first?

I'm brewing two beers back to back so I can reuse some White Labs California Ale (WLP001). One is a basic APA 1.058 OG and the Other is a Scottish Export/80 1.051 OG. Is there any reason I should ...
11
votes
3answers
1k views

What are the advantages and disadvantages of transferring to a secondary vs. a long primary?

The conventional wisdom in homebrewing has been challenged in recent years. This wisdom held that a beer should be transferred from the primary fermentation vessel to a secondary one after 7-10 days. ...
1
vote
1answer
242 views

Fruit Beer—Hard Time Finding the Correct Fruit

I'm trying my hand at making an apricot wheat beer (my first fruit beer). The recipe I'm using instructs me to add apricot puree after the wort has fermented for approximately 3 days and recommended ...
3
votes
2answers
583 views

Sparge volume for batch sparging a partial mash

First off: I realize there are a few somewhat related questions but I think my question will be specific enough to justify it's own question. Specifically this question, but I'm not looking for an ...
6
votes
1answer
524 views

Nothing visible happening in fermenter after three and a half days - what should I do?

My first brew has been in the primary fermenter for three and a half days (brewed Saturday night, it's now Wednesday morning). It's in a plastic bucket fermenter with an airlock. There are no bubbles ...
8
votes
2answers
229 views

Fly Sparging: Can I start boiling straight away

I fly sparge directly into my boil kettle and in general I have the heat on while I'm doing this. When this was on my stove it wasn't powerful enough to get the water boiling before finishing the ...
5
votes
1answer
530 views

Substituting American Two-Row for British Pale Ale Malt

I would like to brew Jamil's Dry Stout from Brewing Classic Styles, which calls for "British pale ale malt," but I happen to have about 75 lbs of 2-row malt already, and I would like to use it. Can I ...
3
votes
3answers
3k views

How long can homebrew stay in the primary fermenter?

I just put down my first brew and should have bottled it last week but had something come up. How long will it be good for? If I bottle it this weekend will it still be good or is there something I ...