A fermented beverage where the majority of the fermentable sugars are derived from malted grains via mashing.

learn more… | top users | synonyms

1
vote
1answer
145 views

Contaminated beer

If you think your beer is contaminated after putting it into your kegs, should you chill it to stop bacteria from growing or leave it in the fermenting fridge at the same temp as before 18'C to allow ...
3
votes
2answers
340 views

Is my beer contaminated?

I just finished fermenting a brew and I forgot to remove the blow off tube which is a tube sitting in a 500 ml bottle of water. So when I started sucking beer out of my fermenter, I sucked all the ...
4
votes
1answer
105 views

Disconnecting a keg

I have a mobile bar business and wanted to add draught beers to our menu. I am a layman with regards to this but I understand how the basic system works using a CO2 (or 70/30 CO2 & Nitrogen) and ...
0
votes
1answer
164 views

Irish Red Recipe [closed]

My friend and I are brewing 3 batches of beer for St. Patrick's Day this year. We are going to make a green pale ale, a milk stout, and we want to make an Irish Red. The unfortunate part is the only ...
2
votes
3answers
1k views

Is there a way to protect beer from freezing in a garage with no electricity

I would like to run a few brews back-to-back to build up a stock of beer. However, I would not be able to store all of the bottles in my house and would be forced to place them in the garage. My ...
7
votes
2answers
120 views

Green wood in beer

I was wondering if I can make some post-christmas beer out of the christmas tree (Norway Spruce). So my question is, does wood have to be dried in order to use it for flavoring or can I use green ...
2
votes
1answer
102 views

What advantages do I gain by putting my mead into a secondary before bottling?

I have always used a secondary fermentation container for my beers and meads in the past. Today I had a conversation with two different coworkers who mentioned they put their mead from the primary ...
9
votes
1answer
2k views

What are the primary causes of Acetaldehyde?

I'm a bit confused about this. In my own experience, I'm no longer experiencing acetaldehyde flavours in my beer after improving my aeration methods and at the same time starting to use yeast ...
3
votes
4answers
2k views

How do I make my ginger beer SPICY?

I've made tons of ginger beer (often just like this http://ieatfood.net/2009/12/18/real-ginger-ale/ ), I've tried various different recipes, and they all come out quite nicely. Unfortunately. I want a ...
4
votes
1answer
512 views

Malt extract fermentability

Does anyone know of resources that specify the fermentability of malt extracts like muntons and coopers? Has anyone done a forced fermentation on these extracts who has results they are willing to ...
5
votes
3answers
3k views

How to make the best beer with arduino?

I would like to use the arduino to monitor and create the best beer. I've look up some info and the best way to look for quality is to measure the beer density. I could not find any digital Hydrometer ...
5
votes
2answers
364 views

Yeast, CO2 Toxicity with mead and beer

Degassing CO2 during early fermentation is important for wine and mead. But why not for beer? I'm getting back into mead making and see plenty of references to degassing the must during early ...
0
votes
1answer
76 views

Yeast in Black Dog Ale

Just ordered a 5 gallon Black Dog Ale kit from Midwest brewing supplies and I have some Saflager W-34/70 in my fridge. Would this be a good yeast to use or would I be better off with the Wyeast ...
7
votes
5answers
164 views

Hop variety resources

Are there any good resources for finding out which hop varieties have similar aroma, flavour and bittering potential. E.g. a place to lookup a hop could be substituted for another hop for bittering ...
2
votes
2answers
788 views

What is the oily film on the top of my kit beer

I made a creme ale 10 days ago and I racked to the secondary after 4 days fermenting( don't ask ) . I tasted it yesterday and it taste very bitter with little to no flavor. When I transferred it to ...
2
votes
2answers
514 views

Does keg secondary fermentation temperature matter?

I'm considering investing in a keg, fridge, etc. I live in a warm climate and currently do secondary fermentation in the bottles in the heat. I've read that people have chest freezers to store kegs. ...
1
vote
1answer
425 views

What size keg to get for 23L brews?

I'm thinking about investing in a keg, etc. done some reading but still have a lot of questions. I currently bottle from brew cans which fill the fermenter to 23L and comes out to about 30x 750ml ...
7
votes
1answer
281 views

What is the benefit to filtering beer?

I'm not a home-brewer, but this seems like a good place to ask the question. why are many commercial beers filtered? I prefer unfiltered beer and I am just curious to know why they filter it in the ...
4
votes
3answers
635 views

Why add a tee next to the pump?

I've seen it recommended in several places to add a tee in the pipe next to the pump used for transferring hot wort. What is the point of this / what benefits do you get? Does the tee go on the input ...
0
votes
1answer
248 views

Will using Winemaker's Acid Blend to adjust mash pH have a flavor impact on beer?

I got a pH meter for Christmas and today was my first chance to try it out. Unfortunately, I didn't think to get any lactic acid. I found that my mash pH was at about 5.8 at 148F, so I put a ...
5
votes
3answers
2k views

How can I restart fermentation on a stuck strong dark belgian ale?

What can we do to restart fermentation that got stuck over the winter? Our club brewed about 7 gallons of this recipe in November. Primary went well, but then the weather got cold and the yeast went ...
1
vote
2answers
198 views

Start a little business of hemp beer

My father started a small cultivation of hemp (~ 2 ha) for business. I would like to start to make my beer from hemp. Unfortunately i am an absolute beginner on this subject. Which are the most ...
2
votes
3answers
1k views

What is causing a bad flavor after cold conditioning?

I've had something happen to a couple batches and can't figure out what's going on. What happens is a major flavor change after the first two weeks of primary, but for the worse. Normally my beers ...
0
votes
1answer
408 views

Slight fizz in beer after 6 days in the fermenter - game over?

I put a batch on last Sunday, started off with a crazy high reading on the hydrometer (around 1080 when I was expecting 1040ish according to the kit) - though I suspect that was because I drew a ...
7
votes
1answer
422 views

Can I make urwagwa?

Urwagwa is a popular beer in Rwanda made from bananas, and I'd like to brew some myself. The recipes and methods I've read online have some very traditional methods (e.g. Bury the bananas for a ...
3
votes
1answer
310 views

Re-using the yeast cake for another brew!

Just finishing up a American Ale and was told by another homebrewer that I could use the yeast cake in the fermentor to brew a hard apple cider when I transfered the beer to bottles for conditioning. ...
4
votes
5answers
3k views

Is there a technique which prevents the deposit of sediment at the bottom of bottles?

Every beer I've brewed and have seen done by others has had a sediment form at the bottom of the bottles. Is there some common mistake that I and others are making which is causing this to happen? ...
5
votes
2answers
220 views

What effect will water with a high Zinc content have on my brew?

I'm about to brew some cider, followed by some pale lager from two kits. I've decided to use bottled spring water from a company just up the road from me. They claim on their website that their water ...
0
votes
3answers
259 views

Move to secondary?

I put my wort in the primary 9 days ago and dry hopped with 1 ounce of Cascade pellets and used a Wyeast 1272 American direct pitch activator pack. I have not taken any readings but noticed it was ...
1
vote
3answers
483 views

Apricot ale alternative?

I have the following recipe in my primary fermenter and had planned on making an apricot ale. I have since realized that apricots are far out of season and my two apricot alternatives are A) make a ...
2
votes
1answer
2k views

Sanitizer sucked back into beer, dangerous?

So I just fermented a 80 Shilling and thought I would try cold crashing for the first time. I dropped it from mid 60's to 38 or so in a 24 hour period and it sucked about 4 cups of sanitizer up the ...
1
vote
1answer
250 views

Looking for a specific fitting

I bought a blichmann therminator, and I want to hook up stainless camlock/ groove 1/2" nipples to all 4 "openings". Problem is, the coolant line in/ out are 3/4" GHT, which, while I understand why ...
1
vote
1answer
637 views

Day Three, still no apparent fermentation

During my most recent brew session I may have been a little too relaxed, and had a few too many homebrews during the process. I feel like I did everything right and kept everything sanitary, but ...
3
votes
2answers
148 views

Strawberry Blond

This is my second attempt at home brewing, my first came out very well. I added a couple of pounds of strawberries to my primary. After one month a racked to my secondary. I was not expecting to ...
2
votes
1answer
120 views

Wort transformation [closed]

Just entered a contest at a local pub. We are given 5 gallons of finished wort and then we have to finish the brew and bring it back to be judged after fermentation and bottling . We have to pitch the ...
5
votes
4answers
388 views

Weighing Liquid Malt Extract

In Brewing Classic Styles by Jamil Zainasheff, many of the recipes call for LME. Often, the amount is 0.5 lbs or similar, particularly of things like Munich extract. I typically brew all-grain, but ...
3
votes
2answers
408 views

Lager krausen won't fall

I'm brewing my first true lager with White Labs WLP800 and the krausen won't fall. I'm being somewhat impatient because it's taking up primary space right now. I pitched at 44°f and let it rise to ...
4
votes
4answers
269 views

Repitching yeast on back to back brews, which one first?

I'm brewing two beers back to back so I can reuse some White Labs California Ale (WLP001). One is a basic APA 1.058 OG and the Other is a Scottish Export/80 1.051 OG. Is there any reason I should ...
1
vote
1answer
242 views

Fruit Beer—Hard Time Finding the Correct Fruit

I'm trying my hand at making an apricot wheat beer (my first fruit beer). The recipe I'm using instructs me to add apricot puree after the wort has fermented for approximately 3 days and recommended ...
2
votes
1answer
192 views

Suggestions for inline heating unit housing for wort circulator?

I built an inline heating element assembly using some 1" copper pipe, a 1" threaded female fitting and some 1/2" fittings. The idea is, wort comes in from the bottom 1/2" fitting, flows over the ...
2
votes
5answers
2k views

The cheapest way to start brewing

I want to start brewing, but I also like to keep my spending in check. Are there any methods or ways to craft a quality brew while not breaking the bank? Are some hops cheaper than others? Cheaper ...
3
votes
2answers
583 views

Sparge volume for batch sparging a partial mash

First off: I realize there are a few somewhat related questions but I think my question will be specific enough to justify it's own question. Specifically this question, but I'm not looking for an ...
6
votes
1answer
524 views

Nothing visible happening in fermenter after three and a half days - what should I do?

My first brew has been in the primary fermenter for three and a half days (brewed Saturday night, it's now Wednesday morning). It's in a plastic bucket fermenter with an airlock. There are no bubbles ...
5
votes
1answer
530 views

Substituting American Two-Row for British Pale Ale Malt

I would like to brew Jamil's Dry Stout from Brewing Classic Styles, which calls for "British pale ale malt," but I happen to have about 75 lbs of 2-row malt already, and I would like to use it. Can I ...
2
votes
1answer
149 views

If some of the yeast doesn't get into the fermenter does it matter?

I just made my first home brew. I have learned many lessons including that if I move the fermenter to its resting place after I add the yeast some of the yeast gets stuck to the glass, and I can't ...
3
votes
3answers
3k views

How long can homebrew stay in the primary fermenter?

I just put down my first brew and should have bottled it last week but had something come up. How long will it be good for? If I bottle it this weekend will it still be good or is there something I ...
1
vote
2answers
388 views

Mixing Wheat and IPA for WOW

So did a tour of Odells with a buddy and his son. During the tour his son asked, "Do you ever mix all the beers into one?" The guide said, "Like a suicide beer? Yes, we've been know to experiment. The ...
1
vote
5answers
7k views

How do you make a sweeter beer?

Since the yeast will burn sugar away generating alcohol & CO2 for as long as it can (until the % by volume makes the brew toxic, killing the yeast off), just adding more sugar doesn't seem to the ...
4
votes
1answer
963 views

How long should I leave my wheat beer in bottles before opening

So far the beer has been in primary fermentation for 11 days, and in bottles now for 4 days. When would you expect the beer would hit optimum flavor and when will it be drinkable/pleasant? Thanks.
10
votes
6answers
6k views

Why is a carboy used for secondary fermentation?

It seems like you could a second bucket for the secondary fermentation. Is there any drawback to not using a carboy for this purpose?