1
vote
5answers
202 views

Are there ways to make your own beer on the cheap?

I have more experience with infusions and other ferments. I'm ready to delve into beer making without buying an expensive kit. What's the best way to do this?
6
votes
2answers
428 views

Clarification for a low-flocculating yeast

I'm brewing a batch using WY2565 Kolsch which mentions that is low-flocculating and that it "remain in suspension post fermentation. It requires filtration or additional settling time to produce ...
3
votes
1answer
301 views

Controlling exothermic heat from primary fermentation with A/C cooling duct

In terms of brewing with Ale yeasts, I understand that fermenter temps can increase up to 10 degrees, or more, than the ambient room temperature. As a "cheap" method for keeping the temperature of the ...
4
votes
1answer
151 views

Long cooling before pitching — aerate now or later?

This is a follow-up to this question: Long cooling before pitching -- read that for background. I aerate to add oxygen to my wort by pouring back and forth between buckets. If I wait before ...
8
votes
2answers
239 views

Fly Sparging: Can I start boiling straight away

I fly sparge directly into my boil kettle and in general I have the heat on while I'm doing this. When this was on my stove it wasn't powerful enough to get the water boiling before finishing the ...
5
votes
1answer
281 views

Ramping temperatures during fermentation

What is the appropriate way to ramp temper when say brewing a Belgian beer? Would I expect to have off flavors from the higher temps? What's the best range for ramping? Do I actively manage the temp ...
5
votes
2answers
1k views

Diacetyl Rest for Wyeast 2206 Bavarian Lager

The Wyeast website seems to strongly suggest a diacetyl as fermentation completes with their Bavarian Lager strain, 2206. I prefer to chill my wort to below fermentation temps prior to pitching the ...
3
votes
1answer
275 views

recapping my bottles? Will it ruin the outcome of my beer?

I bottled my first batch of homebrew and didnt fill the bottles all the way. So the next day I opened the bottles and poured some more beer into them and recapped them.. I this going to mess up the ...
5
votes
2answers
306 views

What are the steps in recapping overcarbonated beer?

What are the steps involved in recapping a bottle of beer for any reason (e.g. if too much priming sugar is added, if a cap appears to be defective or failing, etc)?
5
votes
5answers
6k views

Can I use wine yeast to ferment beer?

Can I use wine yeast to ferment a beer? What sort of problems might I encounter that are unique to wine yeast trying to ferment malt sugars? What sort of flavor differences might I encounter?
2
votes
2answers
370 views

Should steeping grains be crushed differently than mashing grains?

Looking at the process for steeping grains I see that it omits a vorlauf. Would crushing steeping grains in the same way as mashing grains produce too much fine particulate? Should wort from ...
2
votes
2answers
441 views

How to treat Brettanomyces for secondary fermentation?

I'm wanting to add some Brettanomyces lambicus to an old ale after it has been moved to a secondary fermentor (it should be in the 7-8% ABV range at this point, and the primary yeast will be Wyeast ...
3
votes
2answers
390 views

How much time should a warm-fermenting yeast strain sit at the high primary temperature?

I made a batch of braggot (~46% honey) a couple of weeks ago, and used the Duvel strain (a pack of Wyeast 1388 and a vial of WLP570). Pitched at 65 and ramped it up to 82 over the course of 7 days. ...
6
votes
2answers
2k views

How to smoke your malts

How would I go about smoking barley (no points awarded for answering "in a pipe")? My LHBS has a couple of smoked varieties, but not the exact type of smoke I want. I'd like a method that doesn't ...
7
votes
5answers
508 views

Critical Steps to follow for any homebrew beer recipe or process

I've got my second batch of homebrew fermenting, and in just two batches I've learned a lot the hard way (messed up batch priming, possibly under-aerated the wort, etc) What steps are critical to any ...
14
votes
4answers
5k views

How to Properly Oxygenate Wort

How much oxygen do I need to put into my wort? I've heard that homebrewers need to aerate with an oxygen stone and either aquarium pumps or oxygen. Is this true, or is shaking my carboy enough to ...
3
votes
5answers
727 views

Is it possible to do full boils without a propane burner?

I currently brew all-grain using a 7.5 gallon pot on a propane burner outside at a house I currently rent. However, I'm planning to move within the year to an apartment in the city and likely won't ...
3
votes
2answers
899 views

What are some popular methods for measuring boil and HLT volume?

Particularly during lautering and during a boil, I have a hard time keeping track of water/wort volume. What method(s) and equipment do you all recommend for accurately calculating liquid volume ...
6
votes
4answers
2k views

What are some methods to increase extraction efficiency and consistency?

I've got some irregular sugar extraction efficiency problems. My efficiency is regularly low. I need your help. :) I get anywhere from 60% - 85%. I've fine tuned my mill to the best of my ability, so ...
17
votes
6answers
11k views

How to add fruit to beer

What is the best way to add fruit to a beer? I'm afraid boiling it will break down the fruit too much (a muslin bag could fix this I guess), but I'm not sure how to add it to the fermenter without ...
6
votes
5answers
2k views

How are 10-gallon batches commonly fermented?

Currently I brew 5-gallon all-grain batches using my propane burner and 7.5-gallon brew pot. I've been considering buying a bigger pot and building a bigger MLT to do 10-gallon batches, but I'm not ...
14
votes
4answers
3k views

How can I avoid a lot of foam in the first pint from the keg?

Whenever I go to get a pint from the keg, the first pint is always foamy. I have to fill the glass up about 1/3 of the way and dump it out, just to the pour actual beer. I usually carbonate by ...
12
votes
3answers
2k views

Should I ferment a new batch directly on the yeast cake generated by the previous batch?

I'm going to re-use the yeast cake from a low-gravity batch to ferment a high-gravity batch. Can I just put the wort directly on it? Does it then need to be agitated? Is it worth the risk of ...
5
votes
4answers
1k views

What is Extract Twang?

This term pops up from time to time and it often cited as a reason to go to all grain. But maybe its because I don't really know what it tastes like. Do you believe in extract twang? How do you get ...
8
votes
4answers
1k views

Steeping grain time

We are steeping 5# of grain. Is the time the grains should steep based on the weight? We were just going to do 30 mins. Is this the correct amount of time or should it be more or less? This is for an ...
18
votes
1answer
1k views

Partial vs. Full Voume Wort Boil

The starting postion for most new extract brewers is to use a partial boil set up. Defined as using a pot smaller than the intended batch size, all the ingredients are boiled in a smaller volume. ...
12
votes
4answers
20k views

How to grow yeast?

I have read that it is possible to grow your own yeast, but I have not been able to find exact instructions. I would like to grow my own yeast so that I don't have to spend money on those small ...