So yesterday we brew our second beer. As expected, some errors occured during the process, which is alright, we're learning! :) So the main problem is that we were only able to keep the mash ...
I made my third all-grain batch last weekend. I have had issues getting decent efficiency so I added a couple extra pounds of ESB malted barley (11lbs, instead of 9, and about 3lbs of specialty ...
My last few all-grain batches have been under the expected OG at least as far as the recipe is concerned. The beers still taste good and all, but I'd like to get my efficiency up. For example, my ...
Today I attempted an American IPA (Extract) full boil. I calculated the OG to be around 1085 using beersmith. The recipe included just over 11lbs of fermentables (9.15lbs LME, 1.10lb DME, 1lb corn ...
I've brewed a good dozen batches of beer from kits, extract, extract+grain, and now all-grain, and I've never measured gravities. Why measure gravity, besides to know what you're getting? Is there any ...
When brewing from an extract kit we always seem to be low in the Original Gravity department. It's usually not a lot -- something like 1.055 instead of 1.060. What might be causing this to happen? Is ...