The technique of making beer from malted grains instead of using malt extract for the base sugars.

learn more… | top users | synonyms

0
votes
2answers
57 views

Is brew with burned steeping bag safe to drink?

My pot burned a tiny portion, about an inch across, of the steeping bag for an all-grain recipe prior to the boil. Is the beer still safe to drink? What off-flavors can that produce?
1
vote
1answer
50 views

Mashing bag problem

I tried for the first time using the BIAB method and ran into a big problem with the mashing bag. I placed all the ingredients (9lbs of different grains) in the mashing bag without thinking of the ...
1
vote
1answer
54 views

Game of Thrones Recipe help

I have the Unofficial Game of Thrones Cookbook and it has some beer recipes I'm currently trying to follow. However, I'm confused as to wether it has two sets of instructions or all the brews are a ...
0
votes
1answer
31 views

Oil before hops

So I recently got a propane burner to brew outside (it's way too hot to be brewing inside), and I noticed something weird. As the wort came to a boil, it seemed like there was some oil floating on ...
0
votes
3answers
86 views

Softening Hard Water

I have city water at my house which our Regional Water Authority states has a Hardness of 112.10 mg/l. I would like to get this down by 62 points, but not sure what the best way to do this without ...
2
votes
2answers
152 views

High FG / Low Attenuation across 3 different beers

I have brewed 3 all-grain batches now that have a high final gravity: Imperial IPA: Target OG - 1.079, Target FG - 1.011, Actual OG - 1.070, Actual FG - 1.020, Yeast - US-05. Common attenuation ...
2
votes
1answer
400 views

Converting Hops in All-Grain to Extract Recipe

I have this All-Grain recipe that I'm converting to Extract. Do you basically just increase the hops until the IBUs match the original measurement? I've gotten the OG fairly close and the SRM is a ...
1
vote
0answers
28 views

How long do crushed grains last? [duplicate]

In a relatively short time period I will finally embark on all-grain brewing. I would rather purchase grains online as it is cheaper than the LHBS, but the LHBS won't let me use their crushing ...
1
vote
1answer
48 views

Low Pre boil gravity

I have brewed the same recipe 4 times. All 4 brews had 1.028-1.030 pre-boil gravity but today when I finished my mash I had 1.025. Any reasons that happen? And what impact will it have on my beer?
6
votes
4answers
2k views

Should the grain or strike water be added to the mash tun first?

I've always added my grain to my MLT cooler first, then dumped the strike water on top (I don't have a sparge arm). I calculate my strike temps based on the grain temp and initial cooler temp, so I ...
1
vote
1answer
92 views

Substituting 2-row with DME - Extract Torpedo Clone recipe

I really want to make an extract SN Torpedo Clone. During my hunt for recipes, this one in my opinion sounds great and I would really like to try it. Recipe OP here O.G. 1.076 (actual) F.G. 1.016 ...
0
votes
0answers
17 views

Missed Expected OG, Sparging Issue? [duplicate]

I brewed my first all grain batch this past weekend and everything went pretty smooth except my OG was 1.050 instead of the 1.056 I was expecting. Would this be a sparging issue? I had calculated a ...
10
votes
4answers
1k views

Avoiding excessive soot on brew kettles

Are there any secret tricks to avoiding an exorbitant amount of soot on the brew kettle after the boil? We have been making all grain batches recently using a 20 gallon stock pot and a propane ...
1
vote
4answers
83 views

Which yeast and hops should I use to learn the distinctive taste of various grains?

(This title is purposely worded after this question.) I'm about to begin all-grain brewing soon. I'm excited about all of the options, combinations, and ratios of the different grains, but it is very ...
3
votes
3answers
171 views

Do I need to continuously measure the temperature of my mash tun?

From what I understand, the all-grain brewer warms up water to a particular temperature (usually 10-15*F over the strike temperature), adds this warm water to the grains in a mash tun, in an attempt ...
1
vote
1answer
82 views

Why drip water through mash while sparging (fly/continuous) instead of batch sparging?

Why, during sparging, do all-grain brewers drip water over the grains instead of simply filling it up with water again and redraining that?
4
votes
2answers
102 views

Could someone provide info. about brewing salts?

I have been reading a lot about home brewing. I'm planning actually to build an electronic 5 gallon brewery. Could anyone provide a short explanation when (mashing, boiling ?!), why and how much to ...
1
vote
2answers
250 views

Standard size of HLT for all grain?

I'm just beginning all grain and starting to put together my lists. I have a 5 gallon kettle that I used for extract batches. I plan on upgrading to a 11 gallon boil kettle. Will the 5 gallon kettle ...
2
votes
2answers
186 views

New All Grain Setup

I've been brewing extract kits for a while and I think it's time to go to all grain brewing, but I don't exactly know what to buy. I have the book How To Brew and it shows a basic setup, but I'd like ...
11
votes
12answers
7k views

How to brew all-grain indoors

I've been brewing with extracts and specialty grains for two years now, and I want to step up to all-grain brewing. From what I understand, it's important to get a full boil when brewing all-grain and ...
4
votes
5answers
4k views

How low can a beer's final gravity be?

Approximately how low can the finishing gravity of a beer be? I've been brewing from kits for about 10 years, and went all-grain last year. I wouldn't expect to see anything lower than 1.006 or so, ...
4
votes
2answers
153 views

Does a protein rest even do anything?

I have been looking at brewing several recipes that call for a multi-step mash that includes a protein rest. I saw a Mr Wizard article in BYO that sort of defends protein rests. Just like the ...
1
vote
2answers
117 views

Malt mill gap adjustment

The nature of my work is such that i have all the materials and tools to make a mill so i am not intrested on buying one.I want to know if there is a standard gap between the rollers for all type of ...
10
votes
2answers
3k views

All my all-grain batches produce a bitter/astringent, dark, almost burnt off flavor that ruins every batch, from light pilsner to dark belgians

I'm scratching my head trying to figure this one out. Here's the story: I started brewing extracts, and they all came out great. I wanted to get into all-grain so a last year I ordered myself the ...
19
votes
12answers
21k views

What can I do with my spent grain after mashing?

After brewing a batch of beer, I always end up with ~14 lbs of spent grain that I usually just toss in a pile in the corner of the yard. Are there better things to do with it (i.e. cooking, baking, ...
0
votes
1answer
122 views

Is my fermentation on the right track?

I upgraded my equipment and estimated my new efficiency a bit too low, so the imperial IPA that I brewed on 11/30 ended up having an O.G. of 1.10 (supposed to be 1.09). I made a two step starter with ...
6
votes
2answers
391 views

What does a good crush look like, and does it matter if grains are overcrushed if batch sparging?

I am looking for some advice on what a good crush looks like, and whether it matters on my system. The opinions and pics online are all over the place on this. Background: I am buying small-batch ...
2
votes
1answer
121 views

I forgot to calculate for temperature loss during mash in? How will this affect my beer?

Mash in temperature was supposed to be 152 degrees. I forgot to adjust for temperature loss add simply mixed my grains with 152 degree water. I never calculated the final temperature. I did the same ...
2
votes
3answers
127 views

What is the most popular method of brewing beer?

I am a beginner and as a beginner almost everything tells you to use malt extracts to brew your beer. So after a few batches I think I am ready to move up but I am wondering if it's worth the extra ...
9
votes
6answers
932 views

Does suspended yeast contribute to high SG?

I've got a SMaSH beer (Baird Maris Otter and EKG) finishing in primary. It's been fermenting for just over a week. Starting Gravity was 1.046. I mashed at 154F for 60 minutes. Fermented with WY1335 ...
4
votes
2answers
3k views

“White wheat” vs “wheat malt” vs “flaked wheat”?

I was looking for flaked wheat at my LHBS and they were out. My recipe called for roughly equal amounts of wheat malt and flaked wheat. The LHBS guy told me to use white wheat malt as a substitute. He ...
6
votes
3answers
711 views

Can I use my Country Living Grain Mill for homebrewing?

I already own a Country Living Grain Mill for making flour and want to start crushing my own grain for my homebrew. Will this style of mill work for homebrew or should I buy a mill specially for ...
0
votes
5answers
150 views

Measuring Cup for Batch Sparging?

What do people like in terms of heat resistant measuring cups for batch sparging? I found this one on Amazon. I was wondering if there were other options that were better. I'm using it for ...
2
votes
2answers
139 views

What is the effect of conversion efficiency on your brew?

I keep hearing about how we should try and keep our conversion efficiency high, but what exactly does it affect? Is a lower conversion efficiency beer bad?
3
votes
1answer
170 views

Can you brew an all-grains recipe without brewing a full volume

I've been searching online and reading up on all-grains brewing and it seems like most places have indicated that all-grains receipes requires mashing at the full batch size. Ie. If I want to make a ...
1
vote
2answers
144 views

sanitation during mash and sparge

I've been brewing extract batches for a couple of months, and have never lost a batch to poor sanitation. I lost my first all grain batch of beer, and I think that I am sanitizing my brew kettle and ...
2
votes
2answers
160 views

What about grain storage?

I recently cleaned up after brewing one day and realized that I threw away a couple of four gallon water jugs. Could these be used for storing grain for long term? Would the air in the container ...
19
votes
4answers
13k views

How do you sparge?

One of the biggest hurdles I came across when switching to all-grain was learning how to sparge. I honestly still don't think I do it 100% correctly. There are very detailed descriptions online, but ...
2
votes
1answer
259 views

Missed my target gravity and volume by a mile

So, I know there were lots of things I could have done to repair the situation had I been prepared (lesson learned, I'll be having DME on hand from here on out), but I'm a little more interested in ...
4
votes
3answers
3k views

How to calculate the minimum vessel sizes for all grain brewing

Background: Brewing in an kitchenette with limited storage space All Grain brewing, extracts are not available around here I'm looking at BIAB also, but want to have the traditional 3 vessels setup ...
3
votes
3answers
797 views

What size mash tun for a half batch (2-3 gallon) brew?

I have a 10 gallon mash tun (chest cooler) and I've been brewing with pre-made kits. I want to start making my own recipes but I want to do half-batches (2.5 gallons) until I get the hang of things so ...
0
votes
2answers
237 views

How much beer can I do with a 5L pot

A 5 Litre (1.3 US gal) pot is the biggest pan I have at present. I would like to make some all grain batches. How much beer can I brew with such a small pan?
2
votes
6answers
896 views

Wet Crushing Grain

What techniques do you use to condition malt? (AKA wet crush) Malt Conditioning is adding a small amount of moisture to grain before the crush. The HomebrewTalk Wiki recommends raising the moisture ...
2
votes
1answer
252 views

Calculating Infusion Temperature After Protein Rest

I'm using this infusion calculator to determine how much and what the water temperature should be when adding water to my mash tun. A recipe I'm following calls for a protein rest at 122 degrees F for ...
1
vote
1answer
167 views

Temperature Dropped - Is Beer Ruined?

We did our first all-grain last night. Despite the amount of research I did ahead of time, I missed one tip that probably would have helped --preheating the mash tun. The recipe called for a mash ...
3
votes
2answers
527 views

Different ways to use mushrooms in brewing

We were asked to do a mushroom themed brewing demonstration for a local festival/market. Yes, I said mushroom. At first I wondered if this really is such a good idea, but because I like crazy brews ...
3
votes
3answers
174 views

Stuck Mash — New LHBS

I recently found that there was a home brew store much closer to my house than the one that I had been visiting. The new store has a larger selection of grains, yeast, and hops; but I've been having a ...
4
votes
3answers
4k views

All grain - is full wort boil absolutely necessary?

From what I've read it seems you Have to boil the full wort amount when going all grain. I just want to make sure that is the case, as I couldn't understand why you couldn't just boil the malt etc and ...
3
votes
1answer
60 views

If I condition my grain, is it ok to wait until I grind it?

I ran out of time grinding last night, even though I had already conditioned my grain: are there any concerns with leaving some slightly moist grains in a bucket overnight? I've got about 4 ounces of ...
7
votes
5answers
1k views

Over attenuated all grain beers

I'm having a problem with all my beers regardless of style getting over attenuated. I've been raising my mash temps up to 4° above each beers style (up to 158° or so) to compensate with no luck. I've ...