Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

I'd like to know what the effect of trying to bottle 35 pints of a light ale that's already been primed in a barel would be? Presumably there is still yeast floating about that would be able to convert a new dose of priming sugar for bottling? Might two lots of priming affect the taste? This is a hypothetical question... for now :)

share|improve this question
add comment

2 Answers

I'm assuming you are meaning that you've primed AND carbonated in the barrel. Correct me if wrong.

You can bottle already carbonated beer from a keg using counter pressure to reduce foaming. Our very own @joefish made a great video about the process he uses. https://www.youtube.com/watch?v=XXhYmTlHH50.

From a barrel may be more difficult being as you have little to no control over pressure and you may end up with a under carbonated bottle as a result of co2 loss.

I wouldn't reintroduce more sugar into the beer because then you may end up overcarbonating and have all the risks that go along with that.

As far as effect on taste. 5oz priming sugar has a 0.002 effect on your gravity so its hardly anything to worry about.

share|improve this answer
add comment

I have done this many times with a counter-pressure filler. I have also used the Blichmann Beer Gun with success, although I think it does lose a bit more carbonation than the CP-filler. OTOH, the Beer Gun is much easier to use. The key to success is to make sure everything is very cold: Put the bottles in a freezer and take them out 6 at a time as you are filling. Cool the beer down below 40F before starting.

share|improve this answer
    
To be clear, if you're bottling under pressure using a beer gun or similar, you should not add more priming sugar. That would result in over carbonation. –  Tobias Patton Apr 12 '13 at 14:37
    
Yes, agreed. Do not add priming sugar with this method. –  jalynn2 Apr 12 '13 at 16:30
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.