Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

My friend got Paracetic Acid from his LHM store (they only had that and alcohol 70 there).

Is it a non-rinse sanitizer? How good is it?

Wikipedia says it corrodes metals, so no go for the crown caps?

Does it have any other applications (thinking cleaner).

Anything else he should know?

share|improve this question

2 Answers 2

up vote 3 down vote accepted

That's nasty stuff. Handle with gloves! Paracetic Acid comes in several concentrations if you have the 5% Paracetic Acid solution then you should shoot for 1% of the solution in your volume of water. So 1L would need 10ml of parasafe and then scale up or down from there.

Honestly I'd skip it, and make your own sanitizer. In a pinch where I'm out of starsan I use 1oz bleach and 1oz vinegar in 5 gal water. Make sure the vinegar is fully mixed before the bleach is added. Give it a couple minutes contact time but is considered no rinse.

This solution was actually proposed in a podcast by the maker of StarSan, Relevant links: http://www.homebrewtalk.com/wiki/index.php/Homemade_No_Rinse_Sanitizer

share|improve this answer
    
Bleach is fine to use, but is definitely not "no rinse". –  Graham Mar 18 '13 at 15:06
1  
Actually at that concentration it is no rinse. Many brewers rinse because they are afraid of the possibility of off flavors, but it isn't necessary. homebrewtalk.com/wiki/index.php/Homemade_No_Rinse_Sanitizer –  Jared Meyering Mar 18 '13 at 17:48
    
Wow, I stand corrected! –  Graham Mar 18 '13 at 18:05
    
+1 Note though that the original recipe calls for 1oz each of bleach and vinegar in 5 gal, not 1tbsp. 1tbsp is 1/2 fl.oz - does it work at half-concentration? –  mdma Mar 18 '13 at 22:47
    
My mistake will correct. –  Jared Meyering Mar 18 '13 at 23:51

Bleach causes pit-rusting on stainless steel, which is a perfect environment to harbour beerstone. Do not use bleach on stainless steel when brewing.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.