Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

I heard the other day that using brass in your brewery set-up is a bad idea?! well I have brass ball valves from the hardware store on all my kettles? I know that typical brass has lead in it but is this type of brass the same, and dangerous, if so how?

share|improve this question
add comment

2 Answers 2

Brass is fine as long as you clean it properly. John Palmer details what that means in one of the appendices of How to Brew, which is available online here http://www.howtobrew.com/appendices/appendixB.html

The especially important part:

The brass will turn a buttery yellow color as it is cleaned. If the solution starts to turn green and the brass darkens, then the parts have been soaking too long and the copper in the brass is beginning to dissolve, exposing more lead. The solution has become contaminated and the part should be re-cleaned in a fresh solution.

share|improve this answer
add comment

This is one of those things that you're going to have to decide for yourself because there is no simple consensus.

Environmental lead is bad. There's no question about that. Increasingly, there's research to suggest that even low levels of lead are harmful (NIH Study). It's not just full-blown poisoning that you want to watch out for, but more subtle effects like hypertension and even gout.

Personally, I don't feel comfortable with any amount of lead, and realistically it's not hard or expensive to replace the leaded-brass with stainless in this situation. Is one ball valve going to be the thing that kills you? Probably not, but brewing involves swings in both temperature and pH, both of which serve to degrade alloys.

But, ultimately, it's a judgment call that everyone makes differently.

share|improve this answer
2  
+1 Totally agree. Don't use brass for brewing unless you're willing to check each part inside and out after each use and cleaning. It might be acceptable for clean water systems, but I doubt you'd find many commercial breweries using brass. I feel the justification and "safety factor" of brass is influenced by how much cheaper it's seen to be. I'm sure if brass were more expensive than SS, we'd see a whole different set of arguments as to why it should never be used, but because of the difference in price, brass is still up for consideration in applications where it shouldn't be. –  mdma Mar 8 '13 at 15:49
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.