Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

It's starting to get cold out there but I still want to brew. I started looking into electric brew kettles (i am still new and only using extracts kits). Most of the stuff I read online is about adding a heatstick to your brew kettle. I no nothing about welding, so that intimidates me.

I found this water bucket heater on Amazon that people in the comments talk about using it to supplement their stove top for boiling wort. Some comments, however, talk about how its hard to clean properly.

Has anyone here used this? and what are your thoughts? It's currently 50% off, so its only $40, which seems like a great deal if it was to work.

Other then using this, do you have suggesting for brewing inside?

share|improve this question
    
If you do go this rough be sure to use GFI outlets. Otherwise you risk electrocution. Using a stove is a much better option and works quite well. Just use a lid. –  Chris Plaisier Jan 26 '13 at 15:36

1 Answer 1

up vote 3 down vote accepted

If you're boiling 5 gallons or less on the stove top, then brewing indoors can be done using your regular kitchen setup, assuming you've got an extractor fan in the kitchen to vent all the water vapor. For partial boils, it worked well, but for full boils, it took a over an hour to bring the mash liquor up to temperature, and even longer to bring the full 5 gallons to boil after sparging. The largest ring on the hob was 2.2kW, so YMMV.

I did this for a few months before building a rig based on www.theelectricbrewery.com.

share|improve this answer
    
On my really quite sad stove in my apartment I can get 5 gallons to boil in 15 to 20 minutes. The key is to keep the lid on which retains a lot of the energy lost to water vapor. Without the lid on it took 45 to an hour to boil. That seemed like an easy fix. I do half batches and full batches in almost the same time as it takes with a propane burner outside. –  Chris Plaisier Jan 26 '13 at 15:35
    
Unfortunately i do not have a fan on above my stove, so i guess that wont work. I read the article about the heat source on your site., and it peaked my interest. I don't have $1500 to spend on a control unit and I dont plan on doing more then 5 gal batches anytime soon, so i think i am going to go a cheaper diy route, like this one. However your site was awesome and very easy to read for a new brewer and not very electrical person, so i definitely will be buying you a beer. Thanks! –  JayUnt Jan 27 '13 at 2:04
    
It's not my site, but please buy Kal (the guy that runs it) a beer if you find the information useful! –  mdma Jan 27 '13 at 15:35

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.