Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

I'm doing a recipe, and I'll use inverted sugar that I cooked yesterday. But I don't have idea how to handle the specific gravity. I tried to use the densimeter, but it's useless.

share|improve this question
add comment

1 Answer

up vote 5 down vote accepted

You could try this, if you have an accurate scale:

Dilute the syrup to a 10% solution, by weight. For example, 90 grams of water and 10 grams of invert sugar. Mix it very well, and measure the gravity with your hydrometer. The Brix/Plato scale on the hydrometer is the most useful here, as it shows percent sugar, as sucrose. You can use this reading to determine how much sucrose-equivalent is in your sample, and extrapolate to the undiluted syrup.

For example, suppose your dilute sample reads 8 Brix on the hydrometer. That means your 100 gram sample has 8 grams of sugar. Multiply by 10 to determine the percent sugar in the undiluted syrup: 80 grams. Hence your syrup has 80% as much sugar as the same weight of sucrose.

share|improve this answer
    
Aright, I'll measure it later. Thanks. –  Simio Perez Nov 22 '12 at 14:41
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.