Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

I'm planning on taking the step from extract brewing to all grain with BIAB. My plan is to buy a induction hob, 15 gal kettle and a March pump.

Will i need some kind of spacer to keep the bag out of the spigot when i turn on the pump?

share|improve this question
    
What is the pump for? Most instructions I've seen for BIAB is mash and boil in the same vessel, so the liquid doesn't need to go anywhere until post-boil. Regardless, a false bottom should solve this problem. –  Galapagos Jim Nov 21 '12 at 18:28
1  
The pump is to recirculate to keep a even temperature inside and outside the bag. I'm planing to make a system to control the temperature like the Braumeister systems have. –  Olsenius Nov 22 '12 at 12:14
    
Cool idea as it will give you a little more mash control, generate clearer wort and likely increase efficiency a bit. –  brewchez Nov 22 '12 at 15:48

1 Answer 1

Two ideas for you, with the caveat that I have no direct experience with pumps + BIAB, I'm just spitballing here.

A false bottom will keep your bag off the kettle floor and away from the outlet. I couldn't easily see if MoreBeer makes a false bottom to fit that particular kettle, but there's probably a generic product that will fit reasonably well.

A screen on the kettle outlet will prevent the bag from being sucked directly in. I use a tube screen on my kettle to keep loose hops out when I drain the wort, the same should work just as well for maintaining even liquid flow through the bag to the outlet.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.