Take the 2-minute tour ×
Homebrewing Stack Exchange is a question and answer site for dedicated home brewers and serious enthusiasts. It's 100% free, no registration required.

I bottled and capped my second batch of beer in 12 oz glass bottles and realized afterward I'd added far too little priming sugar. Recipe called for 3/4 teaspoon per bottle, and I only used heaping 1/8 teaspoons.

Is this batch a lost cause, or can it be salvaged?

share|improve this question
1  
How long ago did you bottle? –  Graham Nov 8 '12 at 12:56
    
+1 to Graham's comment. If it were me, I'd chill a bottle after 3 weeks and see how the carbonation is before going to the effort of cracking 50 bottles and re-priming them. –  JoeFish Nov 9 '12 at 17:11
    
Also, since you're new: when I say "chill", I mean put a bottle in the fridge overnight, then open it and pour into a glass to evaluate the carbonation. If you don't give it a long chill, the CO2 will not properly dissolve into the beer and the beer may seem flatter than it actually is. –  JoeFish Nov 9 '12 at 17:12
add comment

1 Answer

Well, since you know how much sugar you added at first, you can add enough to cover the rest. I'd just take them out, uncap, add 5/8 teaspoons of sugar, recap, and let carb up again. You might even be alright to add the full 3/4 teaspoons since you will lose a little co2 from opening the bottles up. I don't know if adding the sugar will cause it to foam at all, either. It's better to give it a try and hope for the best than to dump it and never know.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.